journal article·2017-05

Experimental Damage Criterion for Static and Fatigue Life Assessment of Commercial Aluminum Alloy Die Castings

Eleonora Battaglia, Franco Bonollo, Paolo Ferro

Publisher page

Abstract

Defects, particularly porosity and oxides, in high-pressure die casting can seriously compromise the in-service behavior and durability of products subjected to static or cyclic loadings. In this study, the influence of dimension, orientation, and position of casting defects on the mechanical properties of an AlSi12(b) (EN-AC 44100) aluminum alloy commercial component has been studied. A finite element model has been carried out in order to calculate the stress distribution induced by service loads and identify the crack initiation zones. Castings were qualitatively classified on the basis of porosities distribution detected by X-ray technique and oxides observed on fracture surfaces of specimens coming from fatigue and tensile tests. A damage criterion has been formulated which considers the influence of defects position and orientation on the mechanical strength of the components. Using the proposed damage criterion, it was possible to describe the mechanical behavior of the castings with good accuracy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. [1] Bonollo F., Gramegna N. and Timelli G.: JOM, 2015, vol. 67 (5), pp. 901-908.10.1007/s11837-015-1333-8 ↗
2. PRESS DPT. GIFA 2015: Proc. 13th Int. Foundry Trade Fair, Dusseldorf (2015), Germany, Art. n1.
3. [3] Avalle M., Belingardi G., Cavatorta M.P. and Doglione R.: International Journal of Fatigue, 2002, vol. 24, pp. 1-9.10.1016/S0142-1123(01)00112-8 ↗
4. E. Fiorese, D. Richiedei, F. Bonollo: Int. J. Adv. Manuf. Technol., 2016, pp. 1–10.
5. E. Fiorese, F. Bonollo: Metall. Mater. Trans. A, 2016, pp. 1–13.
6. [6] Fiorese E., Richiedei D., Bonollo F.: Metallurgia Italiana, 2016, 108 (6), pp. 21-24.
7. [7] Campbell J.: Castings, 2nd edn., Butterworth-Heinemann, Bodmin, 2003, pp. 352.
8. [8] Gariboldi E., Bonollo F. and Parona P.: Handbook of defects in high pressure die casting, 2nd ed., AIM, Milano, 2010.
9. [9] Laukli H.I., Gourlay C.M. and Dahle A.H.: Mater. Sci. Eng. A, 2005, vol. 413-414, pp. 92-97.10.1016/j.msea.2005.08.194 ↗
10. [10] Timelli G. and Bonollo F.: Mat. Sci. Eng. A, 2010, vol. 528, pp. 273-282.10.1016/j.msea.2010.08.079 ↗
11. [11] Laukli H.I., Gourlay C.M. and Dahle A.H.: Met. Mater. Trans. A, 2005, vol. 36, pp. 805-818.10.1007/s11661-005-1011-5 ↗
12. CEN/TR 16749:2014 Aluminium and aluminium alloys—classification of defects and imperfections in high pressure, low pressure and gravity die cast products 2014, pp. 1–41.
13. [13] Fiorese E., Bonollo F., Timelli G., Arnberg L. and Gariboldi E.: Int. J. of Metal casting, 2015, vol. 9, pp. 55-66.10.1007/BF03355602 ↗
14. [14] Battaglia E., Bonollo F., Tonello I., Fiorese E.: Materials Science Forum, 2017, 879, pp. 193-198.10.4028/www.scientific.net/MSF.879.193 ↗
15. [15] Battaglia E., Bonollo F., Fiorese E., Kral G.: Key Engineering Materials, 2016, 710, pp. 35-40.10.4028/www.scientific.net/KEM.710.35 ↗
16. [16] Sanna F., Fabrizi A., Ferraro S., Timelli G., Ferro P., Bonollo F.: Metallurgia Italiana, 2013, 105 (4), pp. 13-24.
17. [17] Gokhale A.M. and Patel G.R.: Scripta Mater., 2005, vol. 52, pp. 237-241.10.1016/j.scriptamat.2004.09.011 ↗
18. [18] Timelli G. and Bonollo F.: Metal.Sci Tech., 2008, vol. 26, pp. 2-8.
19. [19] Caceres C.H. and Selling B.I.: Mater. Sci. Eng. A, 1996, vol. 220, pp. 109-116.10.1016/S0921-5093(96)10433-0 ↗
20. [20] Skallerud B., Iveland T. and Harkegard G.: Eng. Fract. Mech., 1993, vol. 44, pp. 857-874.10.1016/0013-7944(93)90108-5 ↗
21. [21] Wang Q.G., Apelian D. and Lados D.A.: J. of Light Metals, 2001, vol. 1, pp. 73-84.10.1016/S1471-5317(00)00008-0 ↗
22. D. Lados: PhD thesis, WPI, Worcester USA, 2004.
23. UNI EN12681: Founding—Radiographic Examination, European Committee for Standardization, Brussels, 2006.
24. ASTM E0505-01, Standard Reference Radiographs for Inspection of Aluminium and Magnesium Die Castings, ASTM International, United States, 2001.
25. [24] Battaglia E., Bonollo F., Ferro P., Cenghialta A. and Mazzacavallo G.: Metallurgia Italiana, 2016, vol. 108 (6), pp.61-64.
26. [26] Campbell J.: Complete Casting Handbook, 2nd ed., Elsevier, Oxford, 2015.
27. [27] Timelli G.: Metal. Sci. and Tech., 2010, vol. 28-2, pp. 9-17.