journal article·2013-09

Microstructural Developments Through Marforming in a Ni-Ti-Fe Shape Memory Alloy

R. Basu, L. Jain, B. C. Maji, M. Krishnan, I. Samajdar

Publisher page

Abstract

A hot-rolled Ni-Ti-Fe alloy was subjected to marforming: approximately 8 pct reduction (in thickness) in the martensite phase by laboratory rolling. Before the next marforming step, the sample was annealed to bring back calorimetric signatures of reversible austenite-martensite phase transformation. Significant differences in microstructure could be achieved by combinations of marforming and annealing. Such differences, on the other hand, originated from the marformed microstructure: two distinct regions of remarkably different substructures. The difference was mainly through the relative presence of defects: micro-twins and dislocations. The regions of lower defect densities got textured gradually, with marforming steps, to γ (ND//〈111〉) fiber. The regions with high defect densities, on the other hand, provided non-γ fine clustered grains after annealing. Though debates may continue on the exact nature and origin of micro-twins, the present study brought out their dominant role in determining almost all aspects of microstructural developments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty (2007). In: R.W. Cahn (Ed.), Thermo-Mechanical Processing of Metallic Materials. Elsevier, Amsterdam.
2. M. Maikranz-Valentin, U. Weidig, U. Schoof, H.H. Becker and K. Steinhoff (2008) Steel Res. Int. 79(2):92–97.10.1002/srin.200806322 ↗
3. F.J. Humphreys and M. Hatherly: in Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, U.K., 2002.
4. M.H.Wu : Mater. Sc. Forum, 2002, vol. 394–395, pp. 285–92.10.4028/www.scientific.net/MSF.394-395.285 ↗
5. D. Favier, Y. Liu, L. Orgeas, A. Sandel, L. Debove and P. Comte-Gaz: Mater. Sci. Eng., 2006, vol. A429, pp. 130–36.10.1016/j.msea.2006.05.018 ↗
6. K. Melton: U.S. Patent 4,386,971, 1983.
7. I. Karaman, H. E. Karaca, H.J. Maier, and Z.P. Luo: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2527–39.10.1007/s11661-003-0012-5 ↗
8. Z. Lekston, D. Stróż and M. J. Pawłowska: Solid State Phenom., 2010, vol.16, pp. 118–22.10.4028/www.scientific.net/SSP.163.118 ↗
9. D. Treppmann and E. Hornbogen: J. Phys. IV, 1997, vol. 7, pp. C5 211–20.
10. K. Gall, J. Tyber, G. Wilkesanders, S. W. Robertson, R. O. Ritchie and H. J. Maier: Mater. Sci. Eng., 2008, vol. A486, pp. 389–403.10.1016/j.msea.2007.11.033 ↗
11. D. Wurzel: Mater. Sci. Eng., 1999, vol. A 273–275, pp. 634–38.10.1016/S0921-5093(99)00338-X ↗
12. W.C. Crone, A.N. Yahya and J.H. Perepezko: Mater. Sci. Forum, 2002, vol. 386–388, pp. 597–602.10.4028/www.scientific.net/MSF.386-388.597 ↗
13. A.S. Paula, K.K. Mahesh and FM Braz Fernandes (2011) J. Mater. Eng. Perform 20:771–75.10.1007/s11665-011-9920-5 ↗
14. A.S. Paula, K.K. Mahesh and FM Braz Fernandes (2008) Eur. Phys. J. 158:45–51.
15. A.S Paula, K.K Mahesh, CML Dos Santos, F. Braz Fernandes and C. da Costa Viana: Mater. Sci. Eng., 2008, vol. A 481–482, pp. 146–50.10.1016/j.msea.2007.02.142 ↗
16. J. Spielfeld: Mater. Sci. Eng., 1999, vol. A273–275, pp. 639–43.10.1016/S0921-5093(99)00339-1 ↗
17. S. Miyazaki, V.H. No, K. Kitamura, A. Khantachawana and H. Hosoda: IJP, 2000, vol. 16, pp. 1135–54.10.1016/S0749-6419(00)00004-8 ↗
18. A. Khantachawana, S. Miyazaki, H. Iwai and M. Kohl: Mater. Sci. Eng., 1999, vol. A273–275, pp. 763–68.10.1016/S0921-5093(99)00412-8 ↗
19. L. Zhao, Ph.D. Thesis, University of Twente, Enschede, The Netherlands, 1997.
20. Y.C. Shu, K. Bhattacharya, Acta Mater. 46, 5457 (1998).10.1016/S1359-6454(98)00184-0 ↗
21. A.S. Paula and F.M. Braz Fernandes: Proc. ESOMAT 2009, 2009, vol. 06024, pp. 1–6.
22. P. Van-Houtte: MTM-FHM Software System, version 2, MTM, KULeuven, Belgium, 1995.
23. H.J. Bunge: in Texture Analysis in Materials Science, Butterworths, London, 1982.
24. I. Groma: Phys Rev., 1998, vol. B 57, pp. 7535–42.10.1103/PhysRevB.57.7535 ↗
25. A. Borbely and I. Groma: Appl. Phys. Lett., 2001, vol. 79, pp. 1772–74.10.1063/1.1404134 ↗
26. P. Prevéy: in Current Applications of X-Ray Diffraction Residual Stress Measurement, Developments in Materials Characterization Technologies, J. Friel and G. Van der Voort, eds., ASM International, Materials Park, OH, 1996.
27. P. Van Houtte and L. De Buyser (1993) Acta Metall. Mater. 41(2):323.10.1016/0956-7151(93)90063-X ↗
28. M. M. Nowell and S. I. Wright: Ultramicroscopy, 2005, vol. 103, pp. 41–58.10.1016/j.ultramic.2004.11.012 ↗
29. R. Basu, L. Jain, B.C. Maji, M. Krishnan, K.V. ManiKrishna, P. Pant and I. Samajdar: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1277–87.10.1007/s11661-011-0970-y ↗
30. S.H. Chang and S.K. Wu: Scripta Mater., 2004, vol. 50, pp. 937.10.1016/j.scriptamat.2004.01.009 ↗
31. A.S. Paula, J.H.P.G. Canejo, K.K. Mahesh, R.J.C. Silva, F.M. Braz Fernandes, R.M.S. Martins, A.M.A. Cardoso and N. Schell: Nucl. Inst. Methods Phys. Res., 2006, vol. B 246, pp. 206.10.1016/j.nimb.2005.12.029 ↗
32. S. B. Ribeiro, T. G. Andrade, A. S. Paula, J. F. C. Lins, K. K. Mahesh, F. M. B. Fernandes (2012) Mater Sci Forum 702:884.
33. E. Goo, T. Deurig, K. Melton and R. Sinclair: Acta Metall., 1985, vol. 3, pp. 1725.10.1016/0001-6160(85)90167-1 ↗
34. A.T. Paxton : Acta Metall. Mater., 1995, vol. 43(5), pp. 2133–36.10.1016/0956-7151(94)00419-I ↗
35. M. Krishnan and B.C. Maji: Phil. Mag. Lett., 2001, vol. 81, pp. 243.10.1080/09500830010029418 ↗
36. S.Li, K.Yamauchi, Y.Maruhashi and M.Nishida: Scripta Mater., 2003, vol.49, pp.723.10.1016/S1359-6462(03)00356-7 ↗
37. J. W. Christian and S. Mahajan: Prog. Mater. Sci., 1995, vol. 39, pp. 1–157.10.1016/0079-6425(94)00007-7 ↗
38. W.J. Moberly, R.W. Duerig, J.L. Proft and R. Sinclair: Mater. Sci. Forum, 2002, vol. 56–58, pp. 759–64.
39. T. Ezaz, H. Sehitoglu and H.J. Maier: Acta Mater., 2012, vol. 60, pp. 339–48.10.1016/j.actamat.2011.09.032 ↗
40. N.S. Surikova, A.A. Klopotov and E.A. Korznikova: Phys. Met. Metallogr., 2010, vol. 110(3), pp. 269–78.10.1134/S0031918X10090103 ↗
41. M. Krishnan and J.B. Singh (2000) Acta Mater., 48:1325–44.10.1016/S1359-6454(99)00423-1 ↗
42. Y. Liu, Z. Xie, J.V. Humbeeck, L. Delaey and Y. Liu: Phil. Mag., 2000, vol. 8, pp. 1935.10.1080/01418610008219095 ↗
43. Y. Liu, Z. Xie, J.V. Humbeeck and L. Delaey: Mater. Sci. Eng. 1999, vol. A273- 275, pp. 679.10.1016/S0921-5093(99)00348-2 ↗
44. F. Dalle, E. Perrin, P.Vermaut, M. Masse and R. Portier: Acta Mater., 2002, vol. 50, pp. 3557.10.1016/S1359-6454(02)00151-9 ↗
45. M. Nishida, S. Ii, K. Kitamura, T. Furukawa, A. Chiba, T. Hara and K. Hiraga: Scripta Mater., 1998, vol. 39(12), pp. 1749–54.10.1016/S1359-6462(98)00366-2 ↗
46. H. A. Mohamed and J. Washburn : J. Mater. Sci., 1977, vol. 12, pp. 469–80.10.1007/BF00540269 ↗
47. Y. Liu and Z. Xie (2007) In: P.L. Reece (Ed.), Progress in Smart Materials and Structures. Nova Science Publishers, Inc., New York.
48. S. Miyazaki, T. Imai, I. Igo, K. Otsuka, Metall. Trans. A 17A (1986) 115.10.1007/BF02644447 ↗
49. H. Funakubo, Shape Memory Alloys, Gordon and Breach Science Publishers, New York, 1987.
50. J. Van Humbeeck, R. Stalmans, in: K. Otsuka, C.M. Wayman (Eds.), Shape Memory Materials, Cambridge University Press, Cambridge, 1998, p. 149.
51. S. Miyazaki, K. Otsuka, Y. Suzuki, Scripta Metall. 15 (1981) 287.10.1016/0036-9748(81)90346-X ↗
52. S. Miyazaki, O. Matsumoto, K. Otsuka, and Y. Suzuki: Abstract Bulletin of the 95th Meeting of the Japan Institute of Metals, Hiroshima, 1983, p. 143.
53. S.K Giri, M. Krishnan, U. Ramamurty (2010) Mater. Sci. Eng. A, 528(1):363–370.10.1016/j.msea.2010.09.006 ↗
54. Y. Liu, G.S. Tan, Intermetallics 8 (2000) 67.10.1016/S0966-9795(99)00079-5 ↗
55. M. Krishnan (1998) Acta Mater. 46(18):1439–57.10.1016/S1359-6454(98)00032-9 ↗