Systematic Study on the Microstructures of Biomedical Co–20Cr–15W–10Ni Alloys with Carbon Contents Ranging from 0 to 0.2 mass pct
Source abstract
Abstract
Abstract Herein, the effect of carbon content on the microstructures of Co–20Cr–15W–10Ni (mass pct, CCWN) alloys was systematically studied. For this, CCWN alloys with carbon contents of 0, 0.05, 0.10, and 0.20 mass pct, i.e., 0C, 0.05C, 0.10C, and 0.20C alloys, respectively, were prepared using an induction melting furnace. The as-cast alloys were solution treated at 1523 K for 7.2 ks, followed by cold swaging and heat treatment at 1173 K–1473 K for 0.15–7.2 ks. Consequently, η-phase (M6C-M12C type, M: metallic element) precipitates were detected in the as-cast 0.10C and 0.20C alloys, whereas no precipitates were observed in the 0C and 0.05C alloys. These precipitates were dissolved via a solution treatment. After cold swaging, the ε-phase formed through a strain-induced martensitic transformation in the 0C and 0.05C alloys. Following heat treatment, a single γ-phase matrix was observed in all the alloys, and μ-phase (Co7W6-type) and η-phase precipitates were observed in the 0C and carbon-added alloys, respectively. The precipitation temperature range of the η-phase increased with increasing carbon content. The stability of the precipitates qualitatively conformed with that of the calculated phase diagram. This is the first paper that reports the microstructural changes in CCWN alloys with varying carbon contents.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. J. Favre, Y. Koizumi, A. Chiba, D. Fabregue, and E. Maire: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2819–30.10.1007/s11661-012-1602-x ↗
2. G. Mani, M.D. Feldman, D. Patel, and C.M. Agrawal: Biomaterials, 2007, vol. 28, pp. 1689–1710.10.1016/j.biomaterials.2006.11.042 ↗
3. Q. Chen and G.A. Thouas: Mater. Sci. Eng. R, 2015, vol. 87, pp. 1–57.10.1016/j.mser.2014.10.001 ↗
4. K. Ueki, S. Yanagihara, K. Ueda, M. Nakai, T. Nakano, and T. Narushima: Mater. Trans., 2021, vol. 62, pp. 229–38.10.2320/matertrans.MT-M2020300 ↗
5. V. Hashim, S.L. Resmi, and P.N. Dileep: J. Phys. Conf. Ser., 2019, vol. 1355, 012025.10.1088/1742-6596/1355/1/012025 ↗
6. R.A. Buiten, E.H. Ploumen, P. Zocca, C.J.M. Doggen, L.C. van der Heijden, M.M. Kok, P.W. Danse, C.E. Schotborgh, M. Scholte, F.H.A.F. de Man, G.C.M. Linssen, and C. von Birgelen: JAMA Cardiol., 2019, vol. 4, pp. 659–69.10.1001/jamacardio.2019.1776 ↗
7. Z. Li: Acta Mater., 2019, vol. 164, pp. 400–12.10.1016/j.actamat.2018.10.050 ↗
8. J. Chen, Z. Yao, X. Wang, Y. Lu, X. Wang, Y. Liu, and X. Fan: Mater. Chem. Phys., 2018, vol. 210, pp. 136–45.10.1016/j.matchemphys.2017.08.011 ↗
9. L.B. Chen, R. Wei, K. Tang, J. Zhang, F. Jiang, L. He, and J. Sun: Mater. Sci. Eng. A, 2018, vol. 716, pp. 150–56.10.1016/j.msea.2018.01.045 ↗
10. J.Y. Ko and S.I. Hong: J. Alloys Compd., 2018, vol. 743, pp. 115–25.10.1016/j.jallcom.2018.01.348 ↗
11. N.D. Stepanov, N.Y. Yurchenko, M.A. Tikhonovsky, and G.A. Salishchev: J. Alloys Compd., 2016, vol. 687, pp. 59–71.10.1016/j.jallcom.2016.06.103 ↗
12. N.D. Stepanov, D.G. Shaysultanov, R.S. Chernichenko, N.Y. Yurchenko, S.V. Zherebtsov, M.A. Tikhonovsky, and G.A. Salishchev: J. Alloys Compd., 2017, vol. 693, pp. 394–405.10.1016/j.jallcom.2016.09.208 ↗
13. Z. Wu, C.M. Parish, and H. Bei: J. Alloys Compd., 2015, vol. 647, pp. 815–22.10.1016/j.jallcom.2015.05.224 ↗
14. I. Moravcik, J. Cizek, L.A. de Gouvea, J. Cupera, I. Guban, and I. Dlouhy: Entropy, 2019, vol. 21, p. 363.10.3390/e21040363 ↗
15. D.E. Jodi, J. Park, and N. Park: Mater. Lett., 2020, vol. 258, 126772.10.1016/j.matlet.2019.126772 ↗
16. D.E. Jodi, J. Park, B. Straumal, and N. Park: Mater. Lett., 2020, vol. 258, 126806.10.1016/j.matlet.2019.126806 ↗
17. F. Xiong, R.D. Fu, Y.J. Li, and D.L. Sang: J. Alloys Compd., 2019, vol. 822, 153512.10.1016/j.jallcom.2019.153512 ↗
18. J.B. Seol, J.W. Bae, J.G. Kim, H. Sung, Z. Li, H.H. Lee, S.H. Shim, J.H. Jang, W.S. Ko, S.I. Hong, and H.S. Kim: Acta Mater., 2020, vol. 194, pp. 366–77.10.1016/j.actamat.2020.04.052 ↗
19. J. Favre: Doctoral thesis, 2013, Tohoku University.
20. P.A. Beaven: Doctoral thesis, 1973, University of London.
21. ASTM F90: Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications, (American Society for Testing and Materials, Philadelphia, PA, 2013).
22. M. Tanaka and H. Iizuka: Metall. Trans. A, 1992, vol. 23, pp. 609–16.10.1007/BF02801178 ↗
23. J. Teague, E. Cerreta, and M. Stout: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2767–81.10.1007/s11661-004-0223-4 ↗
24. K. Ueki, S. Yanagihara, K. Ueda, M. Nakai, T. Nakano, and T. Narushima: Mater. Sci. Eng. A, 2019, vol. 766, 138400.10.1016/j.msea.2019.138400 ↗
25. T. Narushima, S. Mineta, Y. Kurihara, and K. Ueda: JOM, 2013, vol. 65, pp. 489–504.10.1007/s11837-013-0567-6 ↗
26. Z. Zhu and L. Chen: Mater. Res. Express, 2019, vol. 6, pp. 126511–21.10.1088/2053-1591/ab546c ↗
27. K. Yamanaka, M. Mori, K. Kuramoto, and A. Chiba: Mater. Des., 2014, vol. 55, pp. 987–98.10.1016/j.matdes.2013.10.052 ↗
28. K. Yamanaka, M. Mori, and A. Chiba: J. Mech. Behav. Biomed. Mater., 2014, vol. 37, pp. 274–85.10.1016/j.jmbbm.2014.05.025 ↗
29. M. Klimova, D. Shaysultanov, A. Semenyuk, S. Zherebtsov, and N. Stepanov: J. Alloys Compd., 2021, vol. 851, 156839.10.1016/j.jallcom.2020.156839 ↗
30. F. Haftlang and H.S. Kim: Mater. Des., 2021, vol. 211, 110161.10.1016/j.matdes.2021.110161 ↗
31. Z. Wang, I. Baker, W. Guo, and J.D. Poplawsky: Acta Mater., 2017, vol. 126, pp. 346–60.10.1016/j.actamat.2016.12.074 ↗
32. G. Qin, W. Xue, R. Chen, H. Zheng, L. Wang, Y. Su, H. Ding, J. Guo, and H. Fu: Materialia, 2019, vol. 6, 100259.10.1016/j.mtla.2019.100259 ↗
33. S. Mineta, Alfirano, S. Namba, T. Yoneda, K. Ueda, and T. Narushima: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3351–58.10.1007/s11661-012-1142-4 ↗
34. K. Ueki, K. Ueda, and T. Narushima: Key Eng. Mater., 2014, vol. 616, pp. 258–62.10.4028/www.scientific.net/KEM.616.258 ↗
35. A. Magneli and A. Westgren: Z. Anorg. Allg. Chem., 1938, vol. 238, pp. 268–72.10.1002/zaac.19382380211 ↗
36. S. Biswas, D.I. Kim, and S. Suwas: Mater. Sci. Eng. A, 2012, vol. 550, pp. 19–30.10.1016/j.msea.2012.03.099 ↗
37. S.I. Wright, M.M. Nowell, and D.P. Field: Microsc. Microanal., 2011, vol. 17, pp. 316–29.10.1017/S1431927611000055 ↗
38. P. Dolzhenko, M. Tikhonova, M. Odnobokova, R. Kaibyshev, and A. Belyakov: Metals, 2022, vol. 12, pp. 2185–97.10.3390/met12122185 ↗
39. Y. Lei, C. Li, and L. Wan: Crystals, 2023, vol. 13, p. 232.10.3390/cryst13020232 ↗
40. Y. Tsutsumi, H. Doi, N. Nomura, M. Ashida, P. Chen, A. Kawasaki, and T. Hanawa: Mater. Trans., 2016, vol. 57, pp. 2033–40.10.2320/matertrans.MI201513 ↗
41. N. Louat: Acta Metall., 1982, vol. 30, pp. 1291–94.10.1016/0001-6160(82)90147-X ↗
42. P. Poncin, C. Millet, J. Chevy, and J.L. Proft: Med. Device Mater. II—Proc. Mater., 2005, pp. 279–83.
43. R. Buerstmayr, F. Theska, E. Kozeschnik, R.F. Webster, M. Lison-Pick, S. Street, and S. Primig: Metall. Mater. Trans. A, 2023, vol. 54A, pp. 2259–76.10.1007/s11661-023-07008-w ↗