The Important Role Played by High-Temperature Tensile Testing in the Representation of Minimum Creep Rates Using S-Shaped Curve Models
Source abstract
Abstract
Abstract It is important to characterize the creep life of materials used in power plants and aeroengines. This paper illustrates the important role played by a material’s tensile strength in enabling accurate creep property representations to be made. It also shows that published high-temperature tensile strength values are not always suitable for use in certain creep models due to its strain rate dependency. To deal with the absence of such suitable date on tensile strength, this paper estimates such values directly from minimum creep rate data. When this technique is applied to models that represent the relationship between minimum creep rates and normalized (with respect to tensile strength) stress using S-shaped curves, an improvement in the fit to data on 2.25Cr–1Mo steel was observed. The findings suggest an important need for future research into the most appropriate strain rates to be used in high-temperature tensile testing when the purpose is to use the resulting tensile strength values for use in creep modeling.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Boiler and Pressure Vessel Code, ASME, New York, 2004. 450
2. D. Allen and S. Garwood: Energy Materials-Strategic Research Agenda, 2007. http://www.matuk.co.uk/docs/1_StrategicResearchAgenda%20FINAL.pdf. Accessed 28 May 2019
3. F.C. Monkman and N.J. Grant: Proc. Am. Soc. Test. Mater., 1956, vol. 56, p. 593.
4. M. Evans: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 697–707.10.1007/s11661-019-05540-2 ↗
5. M. Yang, Q. Wang, X.L. Song, J. Jia, and Z.D. Xiang: Int. J. Mater. Res., 2016, vol. 107(2), pp. 133–38.10.3139/146.111322 ↗
6. Q. Wang, M. Yang, X.L. Song, J. Jia, and Z.D. Xiang: Metall. Mater. Trans. A, 2016, vol. 48A(7), pp. 3479–87.10.1007/s11661-016-3540-5 ↗
7. B. Wilshire and A.J. Battenbough: Mater. Sci. Eng. A, 2007, vol. 443, pp. 156–66.10.1016/j.msea.2006.08.094 ↗
8. NIMS Creep Data Sheet No. 3B: Data Sheets on the Elevated-Temperature Properties of 2.25Cr-1Mo Steel for Boiler and Heat Exchanger Seamless Tubes (STBA 24), National Research Institute for Metals, Tokyo, Japan.
9. J.F. dos Reis Sobrinho and L. de Oliveira Bueno: Revista Matéria, 2005, vol. 10(3), pp. 463–71.
10. R.L. Klueh and R.E. Oakes: J. Eng. Mater. Technol., 1977, vol. 88, pp. 350–57.10.1115/1.3443551 ↗
11. NIMS Creep Data Sheet No.50A: Long-Term Creep Rupture Data obtained after Publishing the Final Edition of the Creep Data Sheets, National Research Institute for Metals, Tokyo, Japan.
12. M. Whittaker and B. Wilshire: Mater. Sci. Eng. A, 2010, vol. 527(18–19), pp. 4932–38.10.1016/j.msea.2010.04.033 ↗
13. M. Whittaker and W.J. Harrison: Mater. High Temp., 2014, vol. 31(3), pp. 233–38.10.1179/1878641314Y.0000000019 ↗
14. Microsoft Corporation. Microsoft Excel. 2018. https://office.microsoft.com/excel