Detwinning Phenomenon and Its Effect on Resulting Twinning Structure of an Austenitic Hadfield Steel
Source abstract
Abstract
Hadfield Steel shows high strain hardening which can be linked to its ability to form twins during mechanical loading. Twinning in Hadfield Steel is well documented, however, detwinning in Hadfield Steel is only barely investigated. Detwinning provides an additional contribution to plastic deformation, therefore it might be an essential effect during cyclic loading. In order to gain more information regarding the deformation behavior in Hadfield Steel, the present work concentrates on the twinning and detwinning behavior during interrupted tensile tests. Tensile tests were conducted in situ within a scanning electron microscope and interrupted at predefined elongations. To determine the formation of twins during every interruption, the electropolished tensile test sample was analyzed by electron backscatter diffraction. The first twins appeared after 5 to 10 pct strain. Conversely, tensile test interruptions at 30 and 40 pct elongation showed partial detwinning of the twinned regions. Furthermore, the Kernel Average Misorientation of the twinned and detwinned regions was analyzed. High values of misorientation were found not only in the twinned but also in the detwinned regions, thus the high level of misorientation can be linked to the twinning/detwinning process.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. G. Tweedale: Notes Rec. R. Soc. Lond., 1985, vol. 40, pp. 63–74.10.1098/rsnr.1985.0004 ↗
2. Y.N. Dastur and W.C. Leslie: Metall. Trans. A, 1981, vol. 12A, pp. 749–59.10.1007/BF02648339 ↗
3. L. Chen, Y. Zhao, and X. Qin: Acta Metall. Sin. (Eng. Lett.), 2013, vol. 26, pp. 1–5.10.1007/s40195-012-0501-x ↗
4. M. Koyama, T. Sawaguchi, T. Lee, C.S. Lee, and K. Tsuzaki: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7310–16.10.1016/j.msea.2011.06.011 ↗
5. C. Scott, S. Allain, M.M. Faral, and N. Guelton: Revue de Métallurgie, 2006, vol. 103, pp. 293–302.10.1051/metal:2006142 ↗
6. K.T. Park, K.G. Jin, S.H. Han, S.W. Hwang, K. Choi, and C.S. Lee: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3651–61.10.1016/j.msea.2010.02.058 ↗
7. R. Harzallah, A. Mouftiez, E. Felder, S. Hariri, and J.-P. Maujean: Wear, 2010, vol. 269, pp. 647–54.10.1016/j.wear.2010.07.001 ↗
8. P.H. Adler, G.B. Olson, and W.S. Owen: Metall. Mater. Trans. A, 1986, vol. 17A, pp. 1725–37.10.1007/BF02817271 ↗
9. V. Läpple, B. Drube, G. Wittke, and C. Kammer: Werkstofftechnik Maschinenbau, 4th ed. Europa Lehrmittel, Haan Gruiten, 2013.
10. A.A. Gulyaev, Y.D. Tyapkin, V.A. Golikov, and V.S. Zharinova: Met. Sci. Heat Treat., 1985, vol. 27, pp. 411–15.10.1007/BF00693279 ↗
11. S.B. Sant and R.W. Smith: J. Mater. Sci., 1987, vol. 22, pp. 1808–14.10.1007/BF01132410 ↗
12. I. Karaman, H. Sehitoglu, Y.I. Chumlyakov, H.J. Maier, and I.V. Kireeva: Scr. Mater., 2001, vol. 44, pp. 337–43.10.1016/S1359-6462(00)00600-X ↗
13. W.D. Callister and D.G. Rethwisch: Materials Science and Engineering, 8th ed. Wiley, Hoboken, 2011.
14. S.J. McCormack, W. Wen, E.V. Pereloma, C.N. Tomé, A.A. Gazder, and A.A. Saleh: Acta Mater., 2018, vol. 156, pp. 172–82.10.1016/j.actamat.2018.06.029 ↗
15. ASTM International: ASTM A128 / A128M-93(2012), Standard Specification for Steel Castings, Austenitic Manganese, 2012.
16. A. Saeed-Akbari, L. Mosecker, A. Schwedt, and W. Bleck: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1688–704.10.1007/s11661-011-0993-4 ↗
17. J. Kang and F.C. Zhang: Mater. Sci. Eng. A, 2012, vol. 558, pp. 623–31.10.1016/j.msea.2012.08.063 ↗
18. O. Bouaziz, H. Zurob, B. Chehab, J.D. Embury, S. Allain, and M. Huang: Mater. Sci. Technol., 2011, vol. 27, pp. 707–09.10.1179/026708309X12535382371852 ↗
19. E. Bayraktar, F.A. Khalid, and C. Levaillant: J. Mater. Process. Technol., 2004, vol. 147, pp. 145–54.10.1016/j.jmatprotec.2003.10.007 ↗
20. J. Kang, F.C. Zhang, X.Y. Long, and B. Lv: Mater. Sci. Eng. A, 2014, vol. 591, pp. 59–68.10.1016/j.msea.2013.10.072 ↗
21. E.G. Astafurova, M.S. Tukeeva, G.G. Maier, E.V. Melnikov, and H.J. Maier: Mater. Sci. Eng. A, 2014, vol. 604, pp. 166–75.10.1016/j.msea.2014.03.029 ↗
22. V.G. Gavriljuk, O. Razumov, Yu. Petrov, I. Surzhenko, and H. Berns: Steel Res. Int., 2007, vol. 78, pp. 720–23.10.1002/srin.200706275 ↗
23. G. Gottstein: Physikalische Grundlagen der Materialkunde, 3rd ed. Springer, Berlin, Heidelberg, 2007.
24. J.W. Christian and S. Mahajan: Prog. Mater. Sci., 1995, vol. 39, pp. 1–57.10.1016/0079-6425(94)00007-7 ↗
25. M.S. Szczerba, T. Bajor, and T. Tokarski: Philos. Mag., 2004, vol. 84, pp. 481–502.10.1080/14786430310001612175 ↗
26. B.C. De Cooman, Y. Estrin, and S.K. Kim: Acta Mater., 2018, vol. 142, pp. 283–362.10.1016/j.actamat.2017.06.046 ↗
27. B.C. De Cooman, O. Kwon, and K.-G. Chin: Mater. Sci. Technol., 2012, vol. 28, pp. 513–27.10.1179/1743284711Y.0000000095 ↗
28. A. Albou, M. Galceran, K. Renard, S. Godet, and P.J. Jacques: Scr. Mater., 2013, vol. 68, pp. 400–03.10.1016/j.scriptamat.2012.10.052 ↗
29. D. Barbier, N. Gex, N. Bozzolo, S. Allain, and M. Humbert: J. Microsc., 2009, vol. 235, pp. 67–78.10.1111/j.1365-2818.2009.03182.x ↗
30. Q. Wang, B. Jiang, J. Zhao, D. Zhang, G. Huang, and F. Pan: Mater. Sci. Eng. A, 2020, vol. 798, pp. 2–10.
31. L. Song, B. Wu, L. Zhang, X. Du, Y. Wang, C. Esling, and M.-J. Philippe: Mater. Charact., 2019, vol. 148, pp. 63–70.10.1016/j.matchar.2018.12.005 ↗
32. A. Vinogradov, E. Vasilev, M. Linderov, and D. Merson: Mater. Sci. Eng. A, 2016, vol. 676, pp. 351–60.10.1016/j.msea.2016.09.004 ↗
33. Y.B. Wang and M.L. Sui: Appl. Phys. Lett., 2009, vol. 94, p. 021909. https://doi.org/10.1063/1.3072801.10.1063/1.3072801 ↗
34. S. Ni, Y.B. Wang, X.Z. Liao, H.Q. Li, R.B. Figueiredo, S.P. Ringer, T.G. Langdon, and Y.T. Zhu: Phys. Rev. B, 2011, https://doi.org/10.1103/PhysRevB.84.235401.10.1103/PhysRevB.84.235401 ↗
35. Y. Cao, Y.B. Wang, Z.B. Chen, X.Z. Liao, M. Kawasaki, S.P. Ringer, T.G. Langdon, and Y.T. Zhu: Mater. Sci. Eng. A, 2013, vol. 578, pp. 110–14.10.1016/j.msea.2013.04.075 ↗
36. M.J. Szczerba, S. Kopacz, and M.S. Szczerba: Acta Mater., 2016, vol. 102, pp. 162–68.10.1016/j.actamat.2015.09.020 ↗
37. M.J. Szczerba, S. Kopacz, and M.S. Szczerba: Acta Mater., 2016, vol. 104, pp. 52–61.10.1016/j.actamat.2015.11.025 ↗
38. C. D’Hondt, V. Doquet, and J.P. Couzini: Mater. Sci. Eng. A, 2021, vol. 814, p. 141250.10.1016/j.msea.2021.141250 ↗
39. R. Mohammadzadeh: Mater. Sci. Eng. A, 2020, vol. 782, p. 139251. https://doi.org/10.1016/j.msea.2020.139251.10.1016/j.msea.2020.139251 ↗
40. J.-K. Hwang: Mater. Sci. Eng. A, 2020, vol. 772, p. 138709. https://doi.org/10.1016/j.msea.2019.138709.10.1016/j.msea.2019.138709 ↗
41. H. Idrissi, K. Renard, L. Ryelandt, D. Schryvers, and P.J. Jacques: Acta Mater., 2010, vol. 58, pp. 2464–76.10.1016/j.actamat.2009.12.032 ↗
42. Z. Wu and H. Bei: Mater. Sci. Eng. A, 2015, vol. 640, pp. 217–24.10.1016/j.msea.2015.05.097 ↗
43. J.B. Cohen and J. Weertman: Acta Metall., 1963, vol. 11, pp. 996–98.10.1016/0001-6160(63)90074-9 ↗
44. T. Karthikeyan, M.K. Dash, S. Saroja, and M. Vijayalakshmi: J. Microsc., 2013, vol. 249, pp. 26–33. https://doi.org/10.1111/j.1365-2818.2012.03676.x.10.1111/j.1365-2818.2012.03676.x ↗
45. E.I. Galindo-Nava and P.E. Rivera-Díaz-del-Castillo: Acta Mater., 2017, vol. 128, pp. 120–34.10.1016/j.actamat.2017.02.004 ↗
46. X. An, S. Ni, M. Song, and X. Liao: Adv. Eng. Mater., 2020, vol. 22, p. 1900479. https://doi.org/10.1002/adem.201900479.10.1002/adem.201900479 ↗
47. I. Karaman, H. Sehitoglu, K. Gall, Y.I. Chumlyakov, and H.J. Maier: Acta Mater., 2000, vol. 48, pp. 1345–59.10.1016/S1359-6454(99)00383-3 ↗
48. S.Y. Hu, C.H. Henager Jr., and L.Q. Chen: Acta Mater., 2010, vol. 58, pp. 6554–64.10.1016/j.actamat.2010.08.020 ↗