journal article·2023-04

Binder Jet Printing AISI 5120 Chromium Steel Powder

A. J. Rayner, R. W. Cooke, I. W. Donaldson, S. F. Corbin, D. P. Bishop

Publisher page

Abstract

The objective of this research was to evaluate the binder jet additive manufacturing (BJAM) processing response of AISI 5120 chromium steel (Fe–0.2C–0.8Cr–0.8Mn–0.2Si) powder produced through gas atomization. Initially, raw powder was fully characterized to assess its off-gassing behavior (TG-GCMS) and phase transformations as a function of temperature (DSC). Test specimens were successfully binder jet printed, cured, de-bound, and then sintered in high vacuum and forming gas atmospheres. Analysis of in situ sintering densification and microstructure evolution was completed through dilatometry, laser confocal microscopy, and SEM/EDS. In addition, post-sinter chemical analysis (ICP) revealed the influence of temperature and atmosphere on the final chemistry of the sintered product.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. P.K. Gokuldoss, S. Kolla, and J. Eckert: Materials, 2017, vol. 10, p. 672.10.3390/ma10060672 ↗
2. T. Do, P. Kwon, and C. Seop: Int. J. Mach. Tools Manuf., 2017, vol. 121, pp. 50–60.10.1016/j.ijmachtools.2017.04.006 ↗
3. A. Mostafaei, A.M. Elliott, J.E. Barnes, F. Li, and W. Tan: Prog. Mater. Sci., 2020, vol. 119, p. 100707.10.1016/j.pmatsci.2020.100707 ↗
4. S.L. Lu, G.K. Meenashisundaram, P. Wang, S.M.L. Nai, and J. Wei: Addit. Manuf., 2021, vol. 34, p. 101266.
5. G.K. Meenashisundaram, Z. Xu, M. Ling, S. Nai, and S. Lu: Materials, 2020, vol. 13, p. 3744.10.3390/ma13173744 ↗
6. V. Sufiiarov, I. Polozov, A. Kantykov, and A. Khaidorov: Mater. Today Proc., 2020, vol. 30, pp. 592–95.10.1016/j.matpr.2020.01.144 ↗
7. R.K. Enneti, K.C. Prough, T.A. Wolfe, A. Klein, N. Studley, and J.L. Trasorras: Int. J. Refract. Metals Hard Mater., 2018, vol. 71, pp. 28–35.10.1016/j.ijrmhm.2017.10.023 ↗
8. A. Kumar, Y. Bai, A. Eklund, and C.B. Williams: Procedia Manuf., 2017, vol. 10, pp. 935–44.10.1016/j.promfg.2017.07.084 ↗
9. I. Rishmawi, M. Salarian, and M. Vlasea: Addit. Manuf., 2018, vol. 24, pp. 508–20.
10. A. Mostafaei, E.L. Stevens, E.T. Hughes, S.D. Biery, C. Hilla, and M. Chmielus: Mater. Des., 2016, vol. 108, pp. 126–35.10.1016/j.matdes.2016.06.067 ↗
11. P. Kumar, R. Jayaraj, J. Suryawanshi, U.R. Satwik, J. Mckinnell, and U. Ramamurty: Acta Mater., 2020, vol. 199, pp. 225–39.10.1016/j.actamat.2020.08.033 ↗
12. Y. Bai, M. Engineering, V. Tech, and C.B. Williams: Rapid Prototyp. J., 2015, vol. 2, pp. 177–85.10.1108/RPJ-12-2014-0180 ↗
13. J.A. Gonzalez, J. Mireles, Y. Lin, and R.B. Wicker: Ceram. Int., 2016, vol. 42, pp. 10559–64.10.1016/j.ceramint.2016.03.079 ↗
14. S. Mirzababaei: J. Manuf. Mater. Process., 2019, vol. 3, p. 82.
15. P. Nandwana, A.M. Elliott, D. Siddel, A. Merriman, W.H. Peter, and S.S. Babu: Curr. Opin. Solid State Mater. Sci., 2017, vol. 21, pp. 207–18.10.1016/j.cossms.2016.12.002 ↗
16. W.F. Smith: Structure and Properties of Engineering Alloys, 2nd ed. McGraw-Hill, New York, 1993.
17. ASM International Handbook Committee: Metals Handbook Desk Edition, 2nd ed. ASM International, Almere, 1998.
18. ASM International Handbook Committee: ASM Handbook Volume 4 Heat Treating, ASM International, Almere, 1991.
19. C.A. Whitman, J.T. O’Flynn, A.J. Rayner, and S.F. Corbin: Thermochim. Acta., 2016, vol. 638, pp. 124–37.10.1016/j.tca.2016.06.019 ↗
20. MPIF: Method for determination of density of compacted or sintered powder metallurgy (PM) products MPIF Standard 42, MPIF, 2008.
21. M.E. Brown: Introduction to Thermal Analysis Techniques and Applications, Kluwer Academic Publishers, New York, 2004.10.1007/0-306-48404-8 ↗
22. W.F. Gale and T.C. Totemeier, eds.: Smithells Metals Reference Book, 8th ed. ASM International, Almere, 2004.
23. R.M. German: Sintering Theory and Practice, Wiley, New York, 1996.
24. N.B. Shaw and R.W.K. Honeycombe: Powder Metall., 1977, vol. 20, pp. 191–98.10.1179/pom.1977.20.4.191 ↗
25. C. Schade, T. Murphy, K. Horvay, A. Lawley, R. Doherty: Development of a Free-Sintering-Low-Alloy (FSLA) Steel for the Binder-Jet Process, in: Powder Metall. 2021, MPIF, 2021.
26. S.M. Howard, Ellingham Diagrams. (Internet Resource for MET 320 - Metallurgical Thermodynamics, South Dakota Sch. Mines Technol.), http://showard.sdsmt.edu/MET320/Handouts/EllinghamDiagrams/Ellingham_v22_Macro. Accessed 15 December 2021.