Out-of-Equilibrium Formation of Ni3Ti η-Phase in Inconel X-750 Produced via Laser Powder Bed Fusion and Spark Plasma Sintering
Source abstract
Abstract
Advanced manufacturing techniques such as powder bed fusion of metals using a laser beam (PBF-LB/M) and spark plasma sintering (SPS) for the production of superalloy components can potentially become competitive with the industry-established routes of casting and forging. In contrast with those routes, these novel methods are particularly effective in optimizing component geometry, which is not so easily accomplished when using conventional techniques. However, since the manufacturing conditions imposed by such methods are considerably different from those of casting and forging, the final microstructure of the materials produced may vary. This is described in the present study with regard to a γ′-strengthened Ni-based superalloy produced through PBF-LB/M and SPS, production routes which, after heat treatment, induced the formation of acicular η-Ni3Ti within the alloy’s microstructure. This phase was identified at grain boundaries of both materials, not being expected according to the heat treatment employed. Such distribution, which contrasts with reports from the literature, is expected to lead to the impairment of the mechanical behavior of the materials produced using these techniques, a prospect that is supported by nanoindentation measurements of local hardness and stiffness.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. G.M. Volpato, U. Tetzlaff, and M.C. Fredel: Addit. Manuf., 2022, vol. 55, p. 102871.
2. D. Dev Singh, T. Mahender, and A. Raji Reddy: Mater. Today Proc., 2021, vol. 46, pp. 350–55.10.1016/j.matpr.2020.08.415 ↗
3. D. Zhang, S. Sun, D. Qiu, M.A. Gibson, M.S. Dargusch, M. Brandt, M. Qian, and M. Easton: Adv. Eng. Mater., 2018, vol. 20, pp. 1–20.
4. R.C. Reed: The superalloys, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
5. M. Detrois, S. Antonov, R.C. Helmink, and S. Tin: Jom, 2014, vol. 66, pp. 2478–85.10.1007/s11837-014-1157-y ↗
6. S. Antonov, M. Detrois, R.C. Helmink, and S. Tin: J. Alloys Compd., 2015, vol. 626, pp. 76–86.10.1016/j.jallcom.2014.11.155 ↗
7. A. Casanova, M. Hardy, and C.M.F. Rae: 8th Int. Symp. Superalloy 718 Deriv. 2014, 2014, pp. 573–86.10.1002/9781119016854.ch45 ↗
8. G. Lemos: Brandenburgischen Technischen Universität Cottbus–Senftenberg, 2020.
9. I.S. Kim, B.G. Choi, H.U. Hong, J. Do, and C.Y. Jo: Mater. Sci. Eng. A, 2014, vol. 593, pp. 55–63.10.1016/j.msea.2013.11.031 ↗
10. M. Detrois, P.D. Jablonski, and J.A. Hawk: Mater. Sci. Eng. A, 2021, vol. 799, p. 140337.10.1016/j.msea.2020.140337 ↗
11. T. Nagahari, T. Nagoya, K. Kakehi, N. Sato, and S. Nakano: Metals., 2020, vol. 10, p. 362. https://doi.org/10.3390/met10030362.10.3390/met10030362 ↗
12. E.J. Pickering, H. Mathur, A. Bhowmik, O.M.D.M. Messé, J.S. Barnard, M.C. Hardy, R. Krakow, K. Loehnert, H.J. Stone, and C.M.F. Rae: Acta Mater., 2012, vol. 60, pp. 2757–69.10.1016/j.actamat.2012.01.042 ↗
13. M. Cao, D. Zhang, Y. Gao, R. Chen, G. Huang, Z. Feng, R. Poprawe, J.H. Schleifenbaum, and S. Ziegler: Mater. Sci. Eng. A, 2021, vol. 801, p. 140427.10.1016/j.msea.2020.140427 ↗
14. E. Hosseini and V.A. Popovich: Addit. Manuf., 2019, vol. 30, p. 100877.
15. T. Sonar, V. Balasubramanian, S. Malarvizhi, T. Venkateswaran, and D. Sivakumar: Mater. Charact., 2021, vol. 174, p. 110997.10.1016/j.matchar.2021.110997 ↗
16. O.M. Messé, J.S. Barnard, E.J. Pickering, P.A. Midgley, and C.M.F. Rae: Philos. Mag., 2014, vol. 94, pp. 1132–52.10.1080/14786435.2013.878052 ↗
17. X. Xing, X. Di, and B. Wang: J. Alloys Compd., 2014, vol. 593, pp. 110–16.10.1016/j.jallcom.2013.12.224 ↗
18. C. Radhakrishna and K. Prasad Rao: J. Mater. Sci., 1997, vol. 32, pp. 1977–84.10.1023/A:1018541915113 ↗
19. Z. Zhang, B.Q. Han, J.Y. Huang, Y.H. Han, Y. Zhou, K. Kakegawa, and E.J. Lavernia: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2023–29.10.1007/s11661-009-9914-1 ↗
20. S. Yan, Q. Wang, X. Chen, C. Zhang, and G. Cui: Vacuum, 2019, vol. 163, pp. 194–203.10.1016/j.vacuum.2019.01.048 ↗
21. T. Xia, Y. Xie, C. Yang, W. Zeng, Z. Bi, J. Liang, G. Zhu, J. Wang, D. Zhang, and E.J. Lavernia: Mater. Charact., 2018, vol. 145, pp. 362–70.10.1016/j.matchar.2018.08.055 ↗
22. E.A. Lass, M.R. Stoudt, M.E. Williams, M.B. Katz, L.E. Levine, T.Q. Phan, T.H. Gnaeupel-Herold, and D.S. Ng: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 5547–58.10.1007/s11661-017-4304-6 ↗
23. F. Zhang, L.E. Levine, A.J. Allen, M.R. Stoudt, G. Lindwall, E.A. Lass, M.E. Williams, Y. Idell, and C.E. Campbell: Acta Mater., 2018, vol. 152, pp. 200–14.10.1016/j.actamat.2018.03.017 ↗
24. E.A. Lass, M.R. Stoudt, M.B. Katz, and M.E. Williams: Scr. Mater., 2018, vol. 154, pp. 83–86.10.1016/j.scriptamat.2018.05.025 ↗
25. G. Lindwall, C.E. Campbell, E.A. Lass, F. Zhang, M.R. Stoudt, A.J. Allen, and L.E. Levine: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 457–67.10.1007/s11661-018-4959-7 ↗
26. M.R. Stoudt, E.A. Lass, D.S. Ng, M.E. Williams, F. Zhang, C.E. Campbell, G. Lindwall, and L.E. Levine: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 3028–37.10.1007/s11661-018-4643-y ↗
27. K.N. Amato, S.M. Gaytan, L.E. Murr, E. Martinez, P.W. Shindo, J. Hernandez, S. Collins, and F. Medina: Acta Mater., 2012, vol. 60, pp. 2229–39.10.1016/j.actamat.2011.12.032 ↗
28. P. Kanagarajah, F. Brenne, T. Niendorf, and H.J. Maier: Mater. Sci. Eng. A, 2013, vol. 588, pp. 188–95.10.1016/j.msea.2013.09.025 ↗
29. A.S. Shaikh, M. Rashidi, K. Minet-Lallemand, and E. Hryha: Powder Metall., 2022, pp. 1–9.10.1080/26889277.2022.2132016 ↗
30. A.S. Hakeem, F. Patel, N. Minhas, A. Malkawi, Z. Aleid, M.A. Ehsan, H. Sharrofna, and A. Al Ghanim: J. Mater. Res. Technol., 2021, vol. 12, pp. 870–81.10.1016/j.jmrt.2021.03.043 ↗
31. O.F. Ogunbiyi, T. Jamiru, E.R. Sadiku, L.W. Beneke, O.T. Adesina, and T.A. Adegbola: Int. J. Adv. Manuf. Technol., 2019, vol. 104, pp. 1425–36.10.1007/s00170-019-03983-w ↗
32. Special Metals Corporation: Inconel Alloy X750, United States, 2004.
33. G. Lemos, M.C. Fredel, F. Pyczak, and U. Tetzlaff: Key Eng. Mater., 2019, vol. 809, pp. 79–86.10.4028/www.scientific.net/KEM.809.79 ↗
34. X. Li and B. Bhushan: Mater. Charact., 2002, vol. 48, pp. 11–36.10.1016/S1044-5803(02)00192-4 ↗
35. G. Lemos, M.C. Fredel, F. Pyczak, and U. Tetzlaff: Key Eng. Mater., 2017, vol. 742, pp. 189–96.10.4028/www.scientific.net/KEM.742.189 ↗
36. N. Kouraytem, J. Varga, B. Amin-Ahmadi, H. Mirmohammad, R.A. Chanut, A.D. Spear, and O.T. Kingstedt: Mater. Des., 2020, https://doi.org/10.1016/j.matdes.2020.109228.10.1016/j.matdes.2020.109228 ↗
37. C.I. Lin, S.J. Niuman, A.K. Kulkarni, D.S. King, J. Singh, and N. Yamamoto: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 1353–66.10.1007/s11661-019-05600-7 ↗
38. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, and W. Zhang: Prog. Mater. Sci., 2018, vol. 92, pp. 112–224.10.1016/j.pmatsci.2017.10.001 ↗
39. P.A. Hooper: Addit. Manuf., 2018, vol. 22, pp. 548–59.
40. W. Yucheng and F. Zhengyi: Mater. Sci. Eng. B, 2002, vol. 90, pp. 34–37.10.1016/S0921-5107(01)00780-2 ↗
41. M. Tokita: in Handbook of Advanced Ceramics, S. Somiya, ed., Elsevier, Oxford, 2013, pp. 1149–77.10.1016/B978-0-12-385469-8.00060-5 ↗
42. M. Calandri, D. Manfredi, F. Calignano, E.P. Ambrosio, S. Biamino, R. Lupoi, and D. Ugues: Adv. Eng. Mater., 2018, vol. 20, p. 1800351.10.1002/adem.201800351 ↗
43. G. Marchese, E. Bassini, M. Calandri, E.P. Ambrosio, F. Calignano, M. Lorusso, D. Manfredi, M. Pavese, S. Biamino, and P. Fino: Met. Powder Rep., 2016, vol. 71, pp. 273–78.10.1016/j.mprp.2016.06.002 ↗
44. S. Li, Q. Wei, Y. Shi, C.K. Chua, Z. Zhu, and D. Zhang: J. Mater. Sci. Technol., 2015, vol. 31, pp. 946–52.10.1016/j.jmst.2014.09.020 ↗
45. O.F. Ogunbiyi, T. Jamiru, E.R. Sadiku, O.T. Adesina, L. Beneke, and T.A. Adegbola: Procedia Manuf., 2019, vol. 35, pp. 1324–29.10.1016/j.promfg.2019.05.022 ↗
46. P.K. Venkiteswaran and D.M.R. Taplin: Met. Sci., 1974, vol. 8, pp. 97–106.10.1179/msc.1974.8.1.97 ↗
47. M. Calandri, S. Yin, B. Aldwell, F. Calignano, R. Lupoi, and D. Ugues: Materials (Basel), 2019, vol. 12, p. 1293.10.3390/ma12081293 ↗
48. O. Gokcekaya, T. Ishimoto, S. Hibino, J. Yasutomi, T. Narushima, and T. Nakano: Acta Mater., 2021, vol. 212, p. 116876.10.1016/j.actamat.2021.116876 ↗
49. F. Geiger, K. Kunze, and T. Etter: Mater. Sci. Eng. A, 2016, vol. 661, pp. 240–46.10.1016/j.msea.2016.03.036 ↗
50. L. Scime and J. Beuth: Addit. Manuf., 2019, vol. 29, p. 100830.
51. V. Mamedov: Powder Metall., 2002, vol. 45, pp. 322–28.10.1179/003258902225007041 ↗
52. D. Levasseur and M. Brochu: Adv. Mater. Res., 2011, vol. 409, pp. 763–68.10.4028/www.scientific.net/AMR.409.763 ↗
53. M. Durand-Charre: The Microstructure of Superalloys, Routledge, London, 2017.10.1201/9780203736388 ↗
54. P. Tao, H. Li, B. Huang, Q. Hu, S. Gong, and Q. Xu: Vacuum, 2019, vol. 159, pp. 382–90.10.1016/j.vacuum.2018.10.074 ↗
55. Y.-L. Kuo, T. Nagahari, and K. Kakehi: Materials (Basel), 2018, vol. 11, p. 996.10.3390/ma11060996 ↗
56. Z. Song, W. Gao, D. Wang, Z. Wu, M. Yan, L. Huang, and X. Zhang: Materials (Basel), 2021, vol. 14, p. 1001.10.3390/ma14041001 ↗
57. Q. Zhang, H. Li, and Y. Yang: in IOP Conference Series: Materials Science and Engineering, vol. 677, 2019.10.1088/1757-899X/677/3/032080 ↗
58. G.D. Smith and S.J. Patel: Proc. Int. Symp. Superalloys Var. Deriv., 2005, pp. 135–54.10.7449/2005/Superalloys_2005_135_154 ↗
59. G.K. Bouse: in Superalloys 1996, R.D. Kissinger, ed., Minerals, Metals & Materials Society, 1996, pp. 163–72.10.7449/1996/Superalloys_1996_163_172 ↗
60. C. Kim, J. Park, H.-U. Hong, J. Gu, and Y. Song: J. Alloys Compd., 2022, vol. 900, 163479.10.1016/j.jallcom.2021.163479 ↗
61. G. Lvov, V.I. Levit, and M.J. Kaufman: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1669–79.10.1007/s11661-004-0076-x ↗
62. M.R. Jahangiri, H. Arabi, and S.M.A. Boutorabi: Trans. Nonferrous Met. Soc. China, 2014, vol. 24, pp. 1717–29.10.1016/S1003-6326(14)63245-3 ↗
63. S. Zhao, X. Xie, G.D. Smith, and S.J. Patel: Mater. Sci. Eng. A, 2003, vol. 355, pp. 96–105.10.1016/S0921-5093(03)00051-0 ↗
64. M.J. Donachie and S.J. Donachie: Superalloys: A Technical Guide, 2nd edn, ASM International, Materials Park, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
65. B. Alabbad and S. Tin: Mater. Charact., 2019, vol. 151, pp. 53–63.10.1016/j.matchar.2019.02.038 ↗
66. J. Li, Y. Wu, Y. Liu, C. Li, Z. Ma, L. Yu, H. Li, C. Liu, and Q. Guo: Mater. Charact., 2020, vol. 169, p. 110547.10.1016/j.matchar.2020.110547 ↗
67. L. Tang, H. Zhang, Q. Guo, C. Liu, C. Li, and Y. Liu: Mater. Charact., 2021, vol. 176, p. 111142.10.1016/j.matchar.2021.111142 ↗
68. M. Seifollahi, S. Kheirandish, S.H. Razavi, S.M. Abbasi, and P. Sahrapour: ISIJ Int., 2013, vol. 53, pp. 311–16.10.2355/isijinternational.53.311 ↗
69. M. Bäker and J. Rösler: Model. Simul. Mater. Sci. Eng., 2019, vol. 27, p. 015002.10.1088/1361-651X/aaefc1 ↗
70. T.M. Smith, B.D. Esser, N. Antolin, G.B. Viswanathan, T. Hanlon, A. Wessman, D. Mourer, W. Windl, D.W. McComb, and M.J. Mills: Acta Mater., 2015, vol. 100, pp. 19–31.10.1016/j.actamat.2015.08.053 ↗
71. T.M. Smith, B.D. Esser, N. Antolin, A. Carlsson, R.E.A. Williams, A. Wessman, T. Hanlon, H.L. Fraser, W. Windl, D.W. McComb, and M.J. Mills: Nat. Commun., 2016, vol. 7, pp. 1–7.
72. D.A. Porter, K.E. Easterling, and M.Y. Sherif: Phase Transformations in Metals and Alloys, CRC Press, Boca Raton, 2021.10.1201/9781003011804 ↗
73. ASM International: in Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, vol. 2, ASM International, Materials Park, 1990, pp. 428–45.
74. ASM International: ASM Specialty Handbook: Nickel, Cobalt, and Their Alloys, vol. 38, ASM International, Materials Park, 2000.
75. S.A. Mantri, S. Dasari, A. Sharma, T. Alam, M.V. Pantawane, M. Pole, S. Sharma, N.B. Dahotre, R. Banerjee, and S. Banerjee: Acta Mater., 2021, vol. 210, p. 116844.10.1016/j.actamat.2021.116844 ↗