Evolution of Texture and Deformation Mechanisms During Repeated Deformation and Heat Treating Cycles of U-6Nb
Source abstract
Abstract
The evolution of the crystallographic texture and lattice strain of uranium 6-weight percent niobium alloy samples are tracked during multiple deformation and heat treating cycles in an effort to understand and control the mechanical properties of the material following thermo-mechanical processing. The heavily twinned microstructure and low-symmetry crystal structure of U-6Nb result in multiple sequential active deformation mechanisms associated with distinctive deformation textures in strain ranges from 0-0.15 true strain. It is found that heating into the high-temperature γ-phase erases much of the texture formed during deformation at room temperature in the α′′-phase and resets the active deformation mechanisms. Through a small number of deformation/heat treat cycles to moderate strains, i.e., ~ 0.13 per cycle, the flow strength of the material is recovered to its original value. However, on the fourth such cycle, a reduction of strength is observed and the sample failed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · X-ray Diffraction in Crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. [1] B.W. Howlett, J. Nucl. Mater., 1970, vol. 35, pp. 278-292.10.1016/0022-3115(70)90212-6 ↗
2. [2] K. Tangri, D.K. Chaudhuri, J. Nucl. Mater., 1965, vol. 15, pp. 278-287.10.1016/0022-3115(65)90076-0 ↗
3. [3] M. Anagnostidis, M. Colombie, H. Monti, J. Nucl. Mater., 1964, vol. 26, pp. 67-76.10.1016/0022-3115(64)90122-9 ↗
4. Y. Takahashi, M. Yamawaki, K. Yamamoto, J. Nucl. Mater., 1988, vol. 154, pp. 141-144.10.1016/0022-3115(88)90127-4 ↗
5. J.G. Speer, D.V. Edmonds, Acta Metall., 1988, vol. 36, pp. 1015-1033.10.1016/0001-6160(88)90156-3 ↗
6. [6] E. Kahana, M. Talianker, A. Landau, J. Nucl. Mater., 1997, vol. 246, pp. 144-149.10.1016/S0022-3115(97)00142-6 ↗
7. K.H. Eckelmeyer, A.D. Romig, L.J. Weirick, Metall. Trans. A, 1984, vol. 15, pp. 1319-30.10.1007/BF02648560 ↗
8. J. Koike, M.E. Kassner, R.E. Tate, R.S. Rosen, Journal of Phase Equilibria, 1998, vol. 19, pp. 253-60.10.1361/105497198770342265 ↗
9. R.D. Field, D.J. Thoma, P.S. Dunn, D.W. Brown, C.M. Cady, Philos. Mag. A, 2001, vol. 81, pp. 1691-1724.10.1080/01418610010010971 ↗
10. R.A. Vandermeer, Acta Metall., 1980, vol. 28, pp. 383-393.10.1016/0001-6160(80)90173-X ↗
11. R.J. Jackson (1970). Report RFP-1535. Rocky Flats Division, The Dow Chemical Company.
12. [12] H.L. Yakel, in: J.J. Burke, D.A. Colling, A.E. Gorum, J. Greenspan (Eds.) Physical Metallugy of Uranium Alloys :Third Army Materials Technology Confernece, Brook Hill Publishing Company, Vail, Colorado, 1974, pp. 259-307.
13. [13] J. Lehmann, R.F. Hills, J. Nucl. Mater., 1960, vol. 2, pp. 261-268.10.1016/0022-3115(60)90060-X ↗
14. [14] B.A. Hatt, J. Nucl. Mater., 1966, vol. 19, pp. 133-141.10.1016/0022-3115(66)90102-4 ↗
15. D.W. Brown, M.A.M. Bourke, P.S. Dunn, R.D. Field, M.G. Stout, D.J. Thoma, Metall. Mater. Trans. A, 2001, vol. 32, pp. 2219-28.10.1007/s11661-001-0197-4 ↗
16. C.N. Tupper, D.W. Brown, R.D. Field, T.A. Sisneros, B. Clausen, Metall. Mater. Trans. A, 2012, vol. 43A, pp. 520-30.10.1007/s11661-011-0931-5 ↗
17. R.A. Vandermeer, J.C. Ogle, W.B. Snyder, Scr. Metall., 1978, vol. 12, pp. 243-4810.1016/0036-9748(78)90106-0 ↗
18. R.A. Vandermeer, J.C. Ogle, W.G. Northcutt, Metall. Trans. A, 1981, vol. 12, pp. 733-741.10.1007/BF02648337 ↗
19. [19] D.A. Carpenter, R.A. Vandermeer, Adv. X-Ray Anal., 1985, vol. 26, pp. 307-312.
20. [20] D.W. Brown, M.A.M. Bourke, P.S. Dunn, R.D. Field, M.G. Stout, D.F. Teter, D.J. Thoma, S.C. Vogel, in: S. Bhatia, P. Khalifah, D. Pochan, P. Radaelli (Eds.) Materials Research Society Fall Meeting, Materials Research Society, Boston, MA, 2005, pp. 205-210.
21. [21] A.S. Sastri, M.J. Marcinkowski, Metallurgical Society of American Institute of Mining, Metallurgical and Petroleum Engineers–Transactions, 1968, vol. 242, pp. 2393-2398.
22. [22] R.V. Krishnan, L.C. Brown, Metall. Trans., 1973, vol. 4, pp. 423-429.10.1007/BF02648694 ↗
23. [23] T.A. Schroeder, I. Cornelis, C.M. Wayman, Metall. Trans. A, 1976, vol. 7A, pp. 535-553.10.1007/BF02643969 ↗
24. D.H. Wood, J.W. Dini, H.R. Johnson, J. Nucl. Mater., 1983, vol. 114, pp. 199-207.10.1016/0022-3115(83)90257-X ↗
25. R.E. Hackenberg, D.W. Brown, A.J. Clarke, L.B. Dauelsberg, R.D. Field, W.L. Hults, A.M. Kelly, M.F. Lopez, D.F. Teter, D.J. Thoma, T.J. Tucker, C.J. Vigil, H.M. Volz (2007). Report LA-14327. Los Alamos National Lab.
26. [26] R.E. Hackenberg, G.M. Hemphill, R.T. Forsyth, P.A. Papin, A.M. Kelly, T.J. Tucker, R.M. Aikin, Jr., D.J. Alexander, M.F. Lopez, A.J. Clarke, Mater. Sci. Forum, 2017, vol. 879, pp. 665-670.10.4028/www.scientific.net/MSF.879.665 ↗
27. [27] M.A.M. Bourke, D.C. Dunand, E. Ustundag, Appl. Phys. A, 2002, vol. A74, pp. S1707-S1709.10.1007/s003390201747 ↗
28. N. Shi, M.A.M. Bourke, J.A. Roberts, J.E. Allison, Metall. Mater. Trans. A, 1997, vol. 28, pp. 2741-53.10.1007/s11661-997-0031-8 ↗
29. H. Wang, B. Clausen, C.N. Tome, P.D. Wu, Acta Mater., 2013, vol. 61, pp. 1179-88.10.1016/j.actamat.2012.10.027 ↗
30. S.C. Vogel, C. Hartig, L. Lutterotti, R.B. Von Dreele, H.R. Wenk, D.J. Williams, Powder Diffr., 2004, vol. 19, pp. 65-68.10.1154/1.1649961 ↗
31. [31] S. Takajo, S.C. Vogel, J. App. Crys., 2018, vol. 51, pp. 895-900.10.1107/S1600576718007732 ↗
32. R.J. Jackson, D.V. Miley, ASM Trans, 1968, vol. 61, pp. 336-43.
33. A.C. Larson, R.B. Von Dreele (1986). Los Alamos National Lab.
34. [34] P.W. Stephens, J. App. Crys., 1999, vol. 32, pp. 281-289.10.1107/S0021889898006001 ↗
35. [35] R.B. Von Dreele, J. App. Crys., 1997, vol. 30, pp. 517-525.10.1107/S0021889897005918 ↗
36. R.E. Hackenberg, R.M. Aikin, J.A. Balog, B.L. Bingham, R. Casey, A. Casteel, I. Cordova, R. Forsyth, F.G. Garcia, D. Guidry, D.L. Hammon, W.L. Hults, D.R. Korzekwa, A.M. Kelly, M.W. Kolby, K.A. Lao, J.C. Lashley, M.F. Lopez, R.J. McCabe, D.E. Nye, P.A. Papin, S.W. Quintana, J.L. Smith, D.F. Teter, D.J. Thoma, T. Tucker, P.K. Tubesing, R.R. Trujillo, C.J. Vigil, H.M. Volz (2007). Los Alamos National Laboratory.
37. D.W. Brown, M.A.M. Bourke, R.D. Field, W.L. Hults, D.F. Teter, D.J. Thoma, S.C. Vogel, Mater. Sci. Eng. A 2006, vol. 421, pp. 15-21.10.1016/j.msea.2005.10.001 ↗
38. B. Clausen, C.N. Tome, D.W. Brown, S.R. Agnew, Acta Mater., 2008, vol. 56, pp. 2456- 2468.10.1016/j.actamat.2008.01.057 ↗
39. A.J. Clarke, D.W. Brown, B. Clausen, T.A. Sisneros, R.D. Field, Metall. Mater. Trans. A, 2020, vol. 51A, pp. 1614-24.10.1007/s11661-020-05647-x ↗
40. [40] C.M. Cady, G.T. Gray, III, S.R. Chen, R.D. Field, D.R. Korzekwa, R.S. Hixson, M.F. Lopez, J. Phys. IV, 2006, vol. 134, pp. 203-208.
41. A.J. Sunwoo, D.S. Hiromoto, J. Nucl. Mater., 2004, vol. 327, pp. 37-45.10.1016/j.jnucmat.2004.01.014 ↗
42. R.D. Field, D.W. Brown, D.J. Thoma, Phil. Mag., 2005, vol. 85, pp. 1441-57.10.1080/14786430500036314 ↗
43. B. Clausen, M. Bourke, Metall. Mater. Trans. A, 2001, vol. 32A, pp. 691-694.10.1007/s11661-001-1004-y ↗