journal article·2020-12

Microstructure Characterization and Mechanical Properties in Individual Zones of Linear Friction Welded Ti-6Al-4V Alloy

Michael Y. Mendoza, Maria J. Quintana, Peter C. Collins

Publisher page

Abstract

Linear friction welding (LFW) offers a new approach to manufacture aerospace components while improving the buy-to-fly ratio. However, the fundamental knowledge associated with the LFW process, including the attendant microstructural evolution and corresponding mechanical behavior is still rather limited. In this research effort, subscale tensile coupons were prepared and tested to determine the properties of each discrete zone of the linear friction welded specimen, namely the welded zone, thermomechanically affected zone, and parent material. The results show that the yield strength of the welded zone is 20 pct higher than the parent material and the thermomechanically affected zone is 13 pct higher than the parent material. Materials characterization, including optical microscopy, scanning electron microscopy, electron backscattered diffraction-based orientation microscopy and transmission electron microscopy, was conducted to develop an understanding of the microstructure–property relationships. The highly refined nature of the microstructure makes final interpretations challenging, but the evidence suggests that the mechanical behavior is dominated by phenomenon that operate at the 1 to 50 nm length scale, including strain hardening and highly refined features that hinder slip.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. P. Wanjara, M. Jahazi: Metall. Mater. Trans. A, 2005, vol. 36(8), pp. 2149-64.10.1007/s11661-005-0335-5 ↗
2. G. Buffa, D. Campanella, M. Cammalleri, A. Ducato, A. Astarita, A. Squillace, S. Esposito, L. Fratini: Procedia Manuf., 2015, vol. 1, pp. 429-41.10.1016/j.promfg.2015.09.053 ↗
3. J. Romero, M.M. Attallah, M. Preuss, M. Karadge, S.E. Bray: Acta Mater., 2009, vol. 57(18), pp. 5582-92.10.1016/j.actamat.2009.07.055 ↗
4. A. Vairis, M. Frost: Wear, 1998, vol. 217(1), pp. 117-31.10.1016/S0043-1648(98)00145-8 ↗
5. A. Vairis, M. Frost: Mater. Sci. Eng. A, 1999, vol. 271(1-2), pp. 477-84.10.1016/S0921-5093(99)00449-9 ↗
6. A.R. McAndrew, P.A. Colegrove, A.C. Addison, B.C.D. Flipo, M.J. Russell: Metall. Mater. Trans. A, 2014, vol. 45(13), pp. 6118-28.10.1007/s11661-014-2575-8 ↗
7. A.R. McAndrew, P.A. Colegrove, C. Bühr, B.C.D. Flipo, A. Vairis: Prog. Mater. Sci., 2018, vol. 92, pp. 225-57.10.1016/j.pmatsci.2017.10.003 ↗
8. I. Bhamji, M. Preuss, P.L. Threadgill, A.C. Addison: Mater. Sci. Tech., 2011, vol. 27(1), pp. 2-12.10.1179/026708310X520510 ↗
9. M. Karadge, M. Preuss, C. Lovell, P.J. Withers, S. Bray: Metall. Mater. Trans. A, 2007, vol. 459(1-2), pp. 182-91.
10. Y. Guo, Y. Chiu, M.M. Attallah, H. Li, S. Bray, P. Bowen: J. Mater. Eng. Perform., 2012, vol. 21(5), pp. 770-6.10.1007/s11665-012-0129-z ↗
11. K. Hiroshi, N. Koji, T. Wakabayashi, N. Kenji: IHI Eng. Rev., 2014, vol. 47(1), pp. 40–43.
12. Y. Guo, M.M. Attallah, Y. Chiu, H. Li, S. Bray, P. Bowen: Mater. Charact., 2017, vol. 127, pp. 342-7.10.1016/j.matchar.2017.03.019 ↗
13. W.Y. Li, T. Ma, Y. Zhang, Q. Xu, J. Li, S. Yang, H. Liao: Adv. Eng. Mater., 2008, vol. 10(1-2), pp. 89-92.10.1002/adem.200700034 ↗
14. M. Grujicic, G. Arakere, B. Pandurangan, C.-F. Yen, B. Cheeseman: J. Mater. Eng. Perform., 2012, vol. 21(10), pp. 2011-23.10.1007/s11665-011-0097-8 ↗
15. A.R. McAndrew, P.A. Colegrove, A.C. Addison, B.C.D. Flipo, M.J. Russell: Mater. Design, 2015, vol. 66, pp. 183-95.10.1016/j.matdes.2014.10.058 ↗
16. W. Li, H. Wu, T. Ma, C. Yang, Z. Chen: Adv. Eng. Mater., 2012, vol. 14(5), pp. 312-8.10.1002/adem.201100203 ↗
17. R. Turner, J.-C. Gebelin, R. Ward, R. Reed: Acta Mater., 2011, vol. 59(10), pp. 3792-803.10.1016/j.actamat.2011.02.028 ↗
18. S. Chandran, P. Verleysen, J. Lian, W. Liu, S. Münstermann: Procedia Eng., 2017, vol. 197, pp. 204-13.10.1016/j.proeng.2017.08.097 ↗
19. I. Ghamarian, Y. Liu, P. Samimi, P.C. Collins: Acta Mater., 2014, vol. 79, pp. 203-15.10.1016/j.actamat.2014.06.063 ↗
20. G. Lütjering, J.C. Williams: Titanium, Springer, Berlin, 2007.
21. T. Ahmed, H. Rack: Mater. Sci. Eng. A, 1998, vol. 243(1-2), pp. 206-11.10.1016/S0921-5093(97)00802-2 ↗
22. MIPARTM, MIPAR User Manual v2.2. https://www.manula.com/manuals/mipar/user-manual/latest/en/topic/feature-measurements. Accessed 2019.
23. X. Gong, S. Mohan, M. Mendoza, A. Gray, P. Collins, S.R. Kalidindi: Integr. Mater. Manuf. Innov., 2017, vol. 6, pp. 218–28.10.1007/s40192-017-0100-9 ↗
24. S. Balachandran, A. Kashiwar, A. Choudhury, D. Banerjee, R. Shi, Y. Wang: Acta Mater., 2016, vol. 106, pp. 374-87.10.1016/j.actamat.2016.01.023 ↗