journal article·2020-10

Quench Temperature-Dependent Mechanical Properties During Nonisothermal Partitioning

G. K. Bansal, P. S. M. Jena, Chiradeep Ghosh, V. C. Srivastava, V. Rajinikanth, Monojit Dutta, S. Ghosh Chowdhury

Publisher page

Abstract

The present study demonstrates the role of hot rolling and quench temperature in determining the mechanical properties of low alloy steel processed through quenching and nonisothermal partitioning (Q&P) route. The results indicate that the abrasive wear resistance does not show any significant variation with quench temperature. However, a reduction in tensile strength and an increase in charpy impact toughness and elongation is observed with increasing quench temperature. Interestingly, the retained austenite shows high thermal stability at sub-zero temperature. Furthermore, during deformation through the wear process, the retained austenite experiences the TRIP effect that leads to improvement in wear resistance. The incorporation of hot rolling prior to Q&P led to a significant improvement in strength, energy absorption capability and wear resistance due to a considerable refinement of the microstructural constituents.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. X. Tan, Y. Xu, X. Yang, Z. Liu, and D. Wu: Mater. Sci. Eng. A, 2014, vol. 594, pp. 149-60.10.1016/j.msea.2013.11.064 ↗
2. G.A. Thomas: Simulation of hot-rolled advanced high strength sheet steel production using a Gleeble system, MS Thesis, Colorado School of Mines, Golden, Co, 2009.
3. G.A. Thomas, J.G. Speer, and D.K. Matlock: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3652–59.10.1007/s11661-011-0648-5 ↗
4. X.D. Tan, Y.B. Xu, X.L. Yang, Z.P. Hu, F. Peng, X.W. Ju, and D. Wu: Mater. Charact., 2015, vol. 104, pp. 23–30.10.1016/j.matchar.2015.03.022 ↗
5. Y. Li, X. Li, G. Yuan, J. Kang, D. Chen, and G. Wang: Mater. Charact., 2016, vol. 121, pp. 157–65.10.1016/j.matchar.2016.10.005 ↗
6. Y. Li, D. Chen, X.Li, J. Kang, G.Yuan, R.D.K. Misra, and G.Wang: Steel Res. Int., 2018, vol. 89, pp. 1-11.
7. G.K. Bansal, V. Rajinikanth, C. Ghosh, V.C. Srivastava, S. Kundu, and S.G. Chowdhury: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 3501-14.10.1007/s11661-018-4677-1 ↗
8. Y.J. Li, J. Kang, W.N. Zhang, D. Liu, X.H. Wang, G. Yuan, R.D.K. Misra, and G.D. Wang: Mater. Sci. Eng. A, 2018, vol. 710, pp. 181-91.10.1016/j.msea.2017.10.104 ↗
9. K. Jian, W. Chao, L. Yunjie, Y. Guo, and W. Guodong: J. Wuhan Univ. Technol. Mater. Sci. Ed., 2016, vol. 31, pp. 178-85.10.1007/s11595-016-1398-4 ↗
10. Y.J. Li, D. Chen, D. Liu, J. Kang, G. Yuan, Q.J. Mao, R.D.K. Misra, and G.D. Wang: Mater. Sci. Eng. A, 2018, vol. 732, pp. 298-310.10.1016/j.msea.2018.07.021 ↗
11. G.K. Bansal, L.P. Junior, C. Ghosh, V. Rajinikanth, S. Tripathy, V.C. Srivastava, A.N. Bhagat, and S.G. Chowdhury: Metall. Mater. Trans. A, 2020, vol. 51, pp. 3410-24.10.1007/s11661-020-05779-0 ↗
12. G.K. Bansal, V. Rajinikanth, C. Ghosh, V.C. Srivastava, M. Dutta, and S.G. Chowdhury: Mater. Sci. Eng. A, 2020, vol. 788, 139614.10.1016/j.msea.2020.139614 ↗
13. J. Dearden and H. O’Neill: Trans. Inst. Weld, 1940, vol. 3, pp. 203-14.
14. G.K. Bansal, M. Pradeep, C. Ghosh, V. Rajinikanth, V.C. Srivastava, A.N. Bhagat, and S. Kundu: Metall. Mater. Trans. Commun. A, 2019, vol. 50, pp. 547-55.10.1007/s11661-018-5039-8 ↗
15. J.G. Speer, A.M. Streicher, D.K. Matlock, F. Rizzo, and G. Krauss: Austenite formation and decomposition, TMS/ISS, Warrendale, 2003, pp. 505-22.
16. R.A. Young (ed.): Int. Union of Cryst., Oxford University Press, New York, 1993. ISBN 0–19–855577–6.
17. D.L. Bish and S.A. Howard: J. Appl. Cryst., 1988, vol. 21, pp. 86-91.10.1107/S0021889887009415 ↗
18. K.O. Findley, J. Hidalgo, R.M. Huizenga, and M.J. Santofimia: Mater. Des., 2017, vol. 117, pp. 248-56.10.1016/j.matdes.2016.12.065 ↗
19. I. Mejıa, C. Maldonado, J.A. Benito, J. Jorba, and A. Roca: Mater. Sci. Forum, 2006, vol. 509, pp. 37-42.10.4028/www.scientific.net/MSF.509.37 ↗
20. H.S. Zhao, W. Li, X. Zhu, X.H. Lu, L. Wang, S. Zhou, and X.J. Jin: Mater. Sci. Eng. A, 2016, vol. 649, pp. 18-26.10.1016/j.msea.2015.09.088 ↗
21. P.C. Wolfram: The microstructural dependence of wear resistance in austenite containing plate steels, MS Thesis, Colorado School of Mines, Golden, Co, 2013.
22. K.W. Andrews: J. Iron Steel Inst., 1965, vol. 203, pp. 721-27.
23. K. Zhang, M. Zhang, Z. Guo, N. Chen, and Y. Rong: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8486-91.10.1016/j.msea.2011.07.049 ↗
24. G. Gao, H. Zhang, X. Gui, P. Luo, Z. Tan, and B. Bai: Acta Mater., 2014, vol. 76, pp. 425-33.10.1016/j.actamat.2014.05.055 ↗
25. G.K. Bansal, D.A. Madhukar, A.K. Chandan, K Ashok, G.K. Mandal, and V.C. Srivastava: Mater. Sci. Eng. A, 2018, vol. 733, pp. 246-56.10.1016/j.msea.2018.07.055 ↗
26. A.K. Chandan, G.K. Bansal, J. Kundu, J. Chakraborty, and S.G. Chowdhury: Mater. Sci. Eng. A, 2019, vol. 768, 138458.10.1016/j.msea.2019.138458 ↗
27. D.P. Koistinen and R.E. Marburger: Acta Metall., 1959, vol. 7, pp. 59–60.10.1016/0001-6160(59)90170-1 ↗
28. S. Naseema, G.K. Bansal, M. Ghosh, G. Das, V.C. Srivatsava, K.S. Rao, and K.G. Krishna: Adv. Mater. Res., 2018, vol. 1148, pp. 75-81.10.4028/www.scientific.net/AMR.1148.75 ↗
29. M.M. Wang, J.C. Hell, and C.C. Tasan: Scr. Mater., 2017, vol. 138, pp. 1-5.10.1016/j.scriptamat.2017.05.021 ↗
30. G.K. Bansal, V.C. Srivastava, and S.G. Chowdhury: Mater. Sci. Eng. A, 2019, vol. 767, 138416.10.1016/j.msea.2019.138416 ↗
31. J. Kadkhodapour, S. Schmauder, D. Raabe, S. Ziaei-Rad, U. Weber, and M. Calcagnotto: Acta Mater., 2011, vol. 59, pp. 4387–94.10.1016/j.actamat.2011.03.062 ↗
32. M. Calcagnotto, Y. Adachi, D. Ponge, and D. Raabe: Acta Mater., 2011, vol. 59, pp. 658–70.10.1016/j.actamat.2010.10.002 ↗
33. A.H. Jahanara, Y. Mazaheri, and M. Sheikhi: Mater. Sci. Eng. A, 2019, vol. 764, 138206.10.1016/j.msea.2019.138206 ↗
34. W. Lu, J. Chen, X. Kong, S.S. Chakravarthula, and Y. Qiao: Mech. Mater., 2011, vol. 43, pp. 567-73.10.1016/j.mechmat.2011.07.001 ↗
35. P.S.M. Jena, R.K. Rai, and J. K. Sahu: Mater. Sci. Technol., 2018, vol. 34, pp. 299-304.10.1080/02670836.2017.1385993 ↗
36. P.S.M. Jena, J.K. Sahu, R.K. Rai, S.K. Das, and R.K. Singh: Wear, 2018, vol. 406-407, pp. 140-48.10.1016/j.wear.2018.04.004 ↗