The Influence of Microstrain Evolution by Tensile Straining on Localized Corrosion of Al-Li Alloys 2099 and 2196
Source abstract
Abstract
The localized deformation behavior during tensile straining (0 to 9 pct) and its effect on the corrosion properties of two third-generation Al-Li alloys (2099 and 2196) were investigated. Both electron backscatter diffraction and 2D micro-digital image correlation were used to examine site-specific effects of orientation and microstrain evolution during tensile straining. After straining, in situ tapping mode atomic force microscopy was used to study galvanic corrosion as it occurred in artificial seawater (3.5 pct NaCl). Regions of high microstrain corroded preferentially, and large, recrystallized grains in mostly unrecrystallized microstructures were highly detrimental to corrosion properties. Recommendations for improved thermomechanical processing and/or alloying to promote corrosion resistance of 2XXX series Al-Li alloys were considered.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. [1] Philippe Lequeu: Adv. Mater. Processes, 2008, vol. 166, pp. 47-49.
2. C. J. Peel: New Light Alloys, 1984, pp. 1–1, 1–34.
3. [3] T. Dursun and C. Soutis: J. Mater., 2014, vol. 56, pp. 862–871.10.1016/j.matdes.2013.12.002 ↗
4. [4] Roberto J. Rioja and John Liu: Metall. Mater. Trans. A, 2012, vol. 43, pp. 3325–3337.10.1007/s11661-012-1155-z ↗
5. [5] G. Itoh, Q. Cui, and M. Kanno: Mater. Sci. Eng. A, 1996, vol. 211, pp. 128-137.10.1016/0921-5093(95)10157-8 ↗
6. [6] S. P. Ringer, B. C. Muddle, and I. J. Polmear: Metall. Mater. Trans. A, 1995, vol. 26, pp. 1659–1671.10.1007/BF02670753 ↗
7. C. Giummarra, B. Thomas, and R. J. Rioja: Proc. Light Met. Tech. Conf., 2007.
8. [8] W. A. Cassada, G. J. Shiflet, and E. A. Starke, Jr.: Metall. Trans. A, 1991, vol. 22A, pp. 299-306.10.1007/BF02656799 ↗
9. ASM (1990) ASM Handbook: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials. ASM International, Cleveland
10. [10] P. Niskanen, T. H. Sanders, J. G. Rinker, and M. Marek: Corros. Sci., 1982, vol. 22, pp. 283–304.10.1016/0010-938X(82)90031-2 ↗
11. [11] Registration Record Series Teal Sheets: International Alloy Designations and Chemical Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys, The Aluminum Association, Arlington, VA, February 2009.
12. [12] K. S. Kumar, S. A. Brown, and J. R. Pickens: Acta. mater., 1996, vol. 44, pp. 1899–1915.10.1016/1359-6454(95)00319-3 ↗
13. [13] C. Kumai, J. Kusinski, G. Thomas, and T. M. Devine: Corros. Sci., 1989, vol. 45, pp. 294-302.10.5006/1.3577857 ↗
14. [14] Y. Ma, X. Zhou, Y. Liao, Y. Yi, H. Wu, Z. Wang, and W. Huang: Corros. Sci., 2016, vol. 107, pp. 41–48.10.1016/j.corsci.2016.02.018 ↗