Microstructural and Mechanical Properties Examination of High-Power Diode Laser-Treated R260 Grade Rail Steels Under Different Processing Temperatures
Source abstract
Abstract
In the present study, high-power diode laser surface treatment was implemented to R260 grade steel with three different processing temperatures (1100 °C, 1200 °C, and 1300 °C) at the laser power of 1750 W and scanning speed of 6 mm/s, in order to identify the effect of various processing temperatures on the mechanical performance. According to the test results, the laser-treated sample at 1300 °C showed much better mechanical performance among the other laser-treated samples. It was found that the laser-treated sample at 1300 °C had about 3 times more surface hardness, a 43 pct increase in yield strength, and a 53 pct increase in toughness value compared to the untreated sample. Microstructural investigations showed that this surface treatment did not only generate a martensitic structure with a certain depth but also provided the formation of a fine pearlitic structure contributing to an increase in the mechanical properties. As a conclusion, it was found that the processing temperature is one of the critical factors affecting the mechanical properties in the laser hardening process. Moreover, the results demonstrated that this treatment method might be an alternative method to enhance the mechanical properties of existing rail steels online without the need for rail disassembly, reducing operational costs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. W.M. Steen: Laser Materials Processing, Springer, London, 2003.10.1007/978-1-4471-3752-8 ↗
2. Laser Institute of America: Handbook of Laser Materials Processing, Magnolia Publishing Inc., Pineville, 2001.
3. S.M. Shariff, T.K. Pal, G. Padmanbham, and S.V. Joshi: Surf. Eng., 2010, vol. 26 (3), pp. 199–208.10.1179/174329409X455458 ↗
4. S. Bonss, M. Seifert, B. Brenner, and E. Beyer: Proc. SPIE, 2003, vol. 4973.10.1117/12.478380 ↗
5. R.C. Crafer and P.J. Oakley: Laser Processing in Manufacturing, Chapman & Hall, London, 1993.10.1007/978-94-011-1570-4 ↗
6. R.J. DiMelfi, P.G. Sanders, B. Hunter, J.A. Eastman, K.J. Sawley, K.H. Leong, and J.M. Kramer: Surf. Coat. Technol., 1998, vol. 106, pp. 30–43.10.1016/S0257-8972(98)00487-3 ↗
7. S. Aldajah, G.R. Fenske, and S. Kumar: J. Tribol., 2003, vol. 125 (3), pp. 643–48.10.1115/1.1537745 ↗
8. J. Pou, C. Trillo, R. Soto, A.F. Doval, M. Bountinguiza, F. Lusquinos, F. Quintero, and M. Perez-Amor: J. Laser Appl., 2003, vol. 15, p. 4.10.2351/1.1585083 ↗
9. M. Wiechec, B. Baker, T. McNelley, M. Matthews, A. Rubenchick, M. Rotter, R. Wu, and S. Beach: World J. Eng. Technol., 2017, vol. 5, pp. 97–112.
10. L. Li: Opt. Las. Eng., 2000, vol. 34, pp. 231–53.10.1016/S0143-8166(00)00066-X ↗
11. W.Q. Chen, C.S. Roychoudhuri, and C.M. Banas: Opt. Eng., 1994, vol. 33, pp. 3662–69.10.1117/12.183489 ↗
12. F. Bachmann: Appl. Surf. Sci., 2003, vol. 208, pp. 125–36.10.1016/S0169-4332(02)01349-1 ↗
13. E. Kennedy, G. Byrne, and D.N. Collins: J. Mater. Process, 2004, vol. 1855, pp. 155–56.
14. I. R. Pashby, S. Barnes, B. G. Bryden: J. Mater Process Technol. 2003, 139(1–3), 585–88.10.1016/S0924-0136(03)00509-0 ↗
15. S.M. Shariff, T.K. Pal, G. Padmanabham, and S.V. Joshi: Surf. Coat. Technol., 2013, vol. 228, pp. 14–26.10.1016/j.surfcoat.2013.03.046 ↗
16. L. Ruifeng, J. Yajuan, L. Zhuguo, and Q. Kai: J. Mater. Eng. Performance, 2014, 23, 3085–94.10.1007/s11665-014-1146-x ↗
17. B. Leibinger: Werkzeug Laser, Ein Lichtstrahl erobert die industrielle Fertigung, Vogel Buchverlag Wurzburg, 1. Airflage, 2006.
18. O. Yazici and S. Yilmaz: Tribol. Int., 2018, vol. 119, pp. 222–29.10.1016/j.triboint.2017.11.006 ↗
19. O. Yazici: Ph.D. Thesis, Institute of Sciences, Istanbul University, Istanbul, 2018.
20. O. Yazici and S. Yilmaz: 18th Int. Metallurgy & Materials Congr. Proc. Book, Istanbul, 2016, pp. 982–85.
21. H. Guler: J. Comput. Civ. Eng., 2013, vol. 27 (3), pp. 292–306.10.1061/(ASCE)CP.1943-5487.0000221 ↗
22. S.R. Lewis, S. Fretwell-Smith, P.S. Goodwin, L. Smith, R. Lewis, M. Aslam, D.I. Fletcher, K. Murray, and R. Lambert: Wear, 2016, vol. 366, pp. 268–78.10.1016/j.wear.2016.05.011 ↗
23. A. Claire, O. Oyelola, J. Falkes, and P. Farayibi: J. Las. Appl., 2012, vol. 24, p. 3.
24. W.R. Tyfour, J.H. Beynon, and A. Kapoor: Wear, 1995, vol. 180, pp. 79–89.10.1016/0043-1648(94)06533-0 ↗
25. C.C. Viafara, M.I. Castro, J.M. Velez, and A. Toro: Wear, 2005, vol. 259, pp. 405–11.10.1016/j.wear.2005.02.013 ↗
26. F. Alwahdi, F.J. Franklin, and A. Kapoor: Wear, 2005, vol. 58, pp. 1031–37.10.1016/j.wear.2004.03.052 ↗
27. F.C.R. Hernandez, N.G. Demas, D.D. Davis, A.A. Polycarpou, and L. Maal: Wear, 2007, vol. 263, pp. 766–72.10.1016/j.wear.2006.12.021 ↗
28. J. Kalousek: Wear, 2005, vol. 258, p. 13305.10.1016/j.wear.2004.03.042 ↗
29. A. Kapoor, F.J. Franklin, S.K. Wong, and M. Ishida: Wear, 2002, vol. 253, pp. 257–64.10.1016/S0043-1648(02)00111-4 ↗
30. L. Deters and M. Proksch: Wear, 2005, vol. 258, pp. 981–91.10.1016/j.wear.2004.03.045 ↗
31. M. Sol-Sanchez, L. Pirozzolo, F. Moreno-Navarro, and R. Gamez: Eng. Struct., 2016, 119, 13–23.10.1016/j.engstruct.2016.04.008 ↗
32. U. Olofsson and T. Telliskivi: Wear, 2003, vol. 254, pp. 80–93.10.1016/S0043-1648(02)00291-0 ↗
33. U.P. Singh, B. Roy, S. Jha, and S.K. Bhattacharyya: Mater. Sci. Technol., 2001, vol. 17 (1), pp. 33–38.10.1179/026708301101509098 ↗
34. M. Tomicic-Torlakovic: Metalurgıja, 2014, vol. 53 (4), pp. 717–20.
35. Online database: Railroad Forums (Railroad Net, 2014), http://www.rairoad.net/forums/viewtopic.php. Accessed 9 Oct 2017.
36. Online document: Innotrack, Guidelines for management of rail grinding (Voestalpine, 2017), https://www.voestalpine.com/schienen/static/sites/schienen/.downloads/Definitive_guidelines_on_the_use_of_different_rail_grades_xINNOTRACK_deliverable_report_D4._1.5GLx_nur_in_Englisch_verfuegbarx.pdf. Accessed 10 Oct 2017.
37. European Committee for Standardization: EN 13674-1:2011+A1, 2017, Railway applications-Track-Rail-Part 1: Vignole railway rails 46 kg/m and above.
38. “Standard Test Methods for Notched Bar Impact Testing of Metallic Materials,” E23-12C, ASTM International, West Conshohocken, PA.
39. R.K. Shiue and C. Chen: Metall. Trans. A, 1992, vol. 23A, p. 163.10.1007/BF02660862 ↗
40. D.I. Pantelis, E. Bouyiouri, N. Kouloumbi, P. Vassiliou, and A. Koutsomichalis: Surf. Coat. Technol., 2002, vol. 161, pp. 125–34.10.1016/S0257-8972(02)00495-4 ↗
41. A.C. Agudelo, J.R. Gancedo, J.F. Marco, M.F. Creus, E. Gallego-Lluesma, J. Desimoni, and R.C. Mercader: Appl. Surf. Sci., 1999, vol. 148, pp. 171–82.10.1016/S0169-4332(99)00155-5 ↗
42. H. Pantser and V. Kujanppaa: Surf. Coat. Technol., 2006, vol. 200, p. 2627.10.1016/j.surfcoat.2004.09.001 ↗