journal article·2018-07

The Femtosecond Laser Ablation on Ultrafine-Grained Copper

Jianxun Lu, Xiaoyu Wu, Shuangchen Ruan, Dengji Guo, Chenlin Du, Xiong Liang, Zhaozhi Wu

Publisher page

Abstract

To investigate the effects of femtosecond laser ablation on the surface morphology and microstructure of ultrafine-grained copper, point, single-line scanning, and area scanning ablation of ultrafine-grained and coarse-grained copper were performed at room temperature. The ablation threshold gradually increased and materials processing became more difficult with decreasing grain size. In addition, the ablation depth and width of the channels formed by single-line scanning ablation gradually increased with increasing grain size for the same laser pulse energy. The microhardness of the ablated specimens was also evaluated as a function of laser pulse energy using area scanning ablation. The microhardness difference before and after ablation increased with decreasing grain size for the same laser pulse energy. In addition, the microhardness after ablation gradually decreased with increasing laser pulse energy for the ultrafine-grained specimens. However, for the coarse-grained copper specimens, no clear changes of the microhardness were observed after ablation with varying laser pulse energies. The grain sizes of the ultrafine-grained specimens were also surveyed as a function of laser pulse energy using electron backscattered diffraction (EBSD). The heat generated by laser ablation caused recrystallization and grain growth of the ultrafine-grained copper; moreover, the grain size gradually increased with increasing pulse energy. In contrast, no obvious changes in grain size were observed for the coarse-grained copper specimens with increasing pulse energy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser Material Processing Techniques · Laser-induced spectroscopy and plasma · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. B.N. Chichkov, C. Momma, S. Nolte, F.V. Alvensleben, and A. Tünnermann: Appl. Phys. A-Mater., 1996, vol. 63, pp. 109–15.10.1007/BF01567637 ↗
2. M.D. Shirk and P.A. Molian: J. Laser Appl., 1998, vol. 10, pp. 18–28.10.2351/1.521827 ↗
3. Q. Feng, Y.N. Picard, H. Liu, S.M. Yalisove, G. Mourou, and T.M. Pollock: Scripta Mater., 2005, vol. 53, pp. 511–16.10.1016/j.scriptamat.2005.05.006 ↗
4. E. Matthias, M. Reichling, J. Siegel, O.W. Kading, and S. Petzoldt: Appl. Phys. A-Mater., 1994, vol. 58, pp. 129–36.10.1007/BF00332169 ↗
5. Y. Dong and P. Molian: Appl. Phys. A-Mater., 2003, vol. 77, pp. 839–46.10.1007/s00339-003-2103-y ↗
6. B. Pecholt, M. Vendan, Y. Dong, and P. Molian: Int. J. Adv. Manuf. Technol., 2008, vol. 39, pp. 239–50.10.1007/s00170-007-1223-5 ↗
7. J. Kruger and W. Kautek: Adv. Polym. Sci., 2004, vol. 168, pp. 247–90.10.1007/b12683 ↗
8. M. Halbwax, T. Sarnet, P. Delaporte, M. Sentis, H. Etienne, F. Torregrosa, V. Vervisch, I. Perichaud, and S. Martinuzzi: Thin Solid Films, 2008, vol. 516, pp. 6791–95.10.1016/j.tsf.2007.12.117 ↗
9. S. Nolte, G. Kamlage, F. Korte, T. Bauer, and T. Wagner: Adv. Eng. Mater., 2000, vol. 2, pp. 23–27.10.1002/(SICI)1527-2648(200002)2:1/2<23::AID-ADEM23>3.0.CO;2-L ↗
10. E.G. Gamaly, A.V. Rode, B. Lutherdavies, and V.T. Tikhonchuk: Phys. Plasmas, 2002, vol. 9, pp. 949–57.10.1063/1.1447555 ↗
11. C. Wu, M.S. Christensen, J.M. Savolainen, P. Balling, and L.V. Zhigilei: Phys. Rev. B, 2015, vol. 91, p. 035413.10.1103/PhysRevB.91.035413 ↗
12. V. Kara and H. Kizil: Opt. Laser Eng., 2012, vol. 50, pp. 140–47.10.1016/j.optlaseng.2011.09.016 ↗
13. D.A. Zayarny, A.A. Ionin, S.I. Kudryashov, S.V. Makarov, A.A. Rudenko, S.G. Bezhanov, S.A. Uryupin, A.P. Kanavin, V.I. Emelyanov, S.V. Alferov, S.N. Khonina, S.V. Karpeev, A.A. Kuchmizhak, O.B. Vitrik, and Y.N. Kulchin: JETP Lett., 2015, vol. 101, pp. 394–97.10.1134/S0021364015060132 ↗
14. A.P. Singh, A. Kapoor, and K.N. Tripathi: Opt. Laser Technol., 2003, vol. 35, pp. 87–97.10.1016/S0030-3992(02)00146-9 ↗
15. K. Venkatakrishnan, B. Tan, and B.K.A. Ngoi: Opt. Laser Technol., 2002, vol. 34, pp. 199–202.10.1016/S0030-3992(01)00110-4 ↗
16. N.G. Semaltianos, W. Perrie, P. French, M. Sharp, G. Dearden, and K.G. Watkins: Appl. Surf. Sci., 2008, vol. 255, pp. 2796–2802.10.1016/j.apsusc.2008.08.043 ↗
17. C. Wu and L.V. Zhigilei: J. Phys. Chem. C, 2016, vol. 120, pp. 4438–47.10.1021/acs.jpcc.6b00013 ↗
18. M.Y. Shen, C.H. Crouch, J.E. Carey, and E. Mazur: Appl. Phys. Lett., 2004, vol. 85, pp. 5694–96.10.1063/1.1828575 ↗
19. J. Bonse, S. Baudach, J. Kruger, W. Kautek, and M. Lenzner: Appl. Phys. A-Mater., 2002, vol. 74, pp. 19–25.10.1007/s003390100893 ↗
20. M.V. Shugaev, C. Wu, O. Armbruster, A. Naghilou, N. Brouwer, D.S. Ivanov, T.J.Y. Derrien, N.M. Bulgakova, W. Kautek, B. Rethfeld, and L.V. Zhigilei: MRS Bull., 2016, vol. 41, pp. 960–68.10.1557/mrs.2016.274 ↗
21. J. Bonse, J.M. Wrobel, J. Krüger, and W. Kautek: Appl. Phys. A-Mater., 2001, vol. 72, pp. 89–94.10.1007/s003390000596 ↗
22. J. Zhu, G. Yin, M. Zhao, D. Chen, and L. Zhao: Appl. Surf. Sci., 2005, vol. 245, pp. 102–08.10.1016/j.apsusc.2004.09.113 ↗
23. J.F. Herbstman, A.J. Hunt, and S.M. Yalisove: Appl. Phys. Lett., 2008, vol. 93, p. 5083.10.1063/1.2952832 ↗
24. C.B. Schaffer, A.O. Jamison, and E. Mazur: Appl. Phys. Lett., 2004, vol. 84, pp. 1441–43.10.1063/1.1650876 ↗
25. A. Ben-Yakar, R.L. Byer, A. Harkin, J. Ashmore, H.A. Stone, M. Shen, and E. Mazur: Appl. Phys. Lett., 2003, vol. 83, pp. 3030–32.10.1063/1.1619560 ↗
26. E.G. Gamaly, S. Juodkazis, H. Misawa, B. Luther-Davies, L. Hallo, P. Nicolai, and V.T. Tikhonchuk: Phys. Rev. B, 2006, vol. 73, p. 214101.10.1103/PhysRevB.73.214101 ↗
27. V.M. Segal: Mater. Sci. Eng. A, 1995, vol. 197, pp. 157–64.10.1016/0921-5093(95)09705-8 ↗
28. V.M. Segal: Mater. Sci. Eng. A, 1999, vol. 271, pp. 322–33.10.1016/S0921-5093(99)00248-8 ↗
29. J.X. Lu, X.Y. Wu, Z.Y. Liu, X.Q. Chen, B. Xu, Z.Z. Wu, and S.C. Ruan: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 4648–58.10.1007/s11661-016-3622-4 ↗
30. N.J. Petch: J. Iron. Steel. Inst., 1963, vol. 174, pp. 25–28.
31. E.O. Hall: Proc. Phys. Soc., 1951, vol. 643, pp. 747–52.10.1088/0370-1301/64/9/303 ↗
32. R.L. Harzic, N. Huot, E. Audouard, C. Jonin, P. Laporte, S. Valette, A. Fraczkiewicz, and R. Fortunier: Appl. Phys. Lett., 2002, vol. 80, pp. 3886–88.10.1063/1.1481195 ↗
33. O.F. Higuera-Cobos and J.M. Cabrera: Mater. Sci. Eng. A, 2013, vol. 571, pp. 103–14.10.1016/j.msea.2013.01.076 ↗
34. Y. Hirayama and M. Obara: J. Appl. Phys., 2005, vol. 97, p. 064903.10.1063/1.1852692 ↗
35. W.H. Duff and L.V. Zhigilei: J. Phys. Conf. Ser., 2007, vol. 59, p. 413.10.1088/1742-6596/59/1/088 ↗