Effects of Mode of Deformation and Extent of Reduction on Evolution of {111}-Fiber During Cold Rolling of Ni-16Cr Alloy
Source abstract
Abstract
The high ratio of relative resolved shear stress on a twin to planar slip system results in microstructural latent hardening (some kind of overshooting) by the twin system on the primary slip planes, which leads to development of the {111}-fiber in Ni-16Cr alloy. The development of {111}-fiber starts as early as around 16 pct cold reduction in Ni-16Cr alloy and persists with maximum average intensity ranging from 35 to 40 pct additional deformation, i.e., around 50 pct cold reduction in unidirectional (U) and two-step cross (T)-rolling modes. In between 50 and 68 pct reductions in U and T modes, the fiber becomes unstable and starts disappearing. However, in multistep cross (M) rolling, the {111}-fiber formation starts late, i.e., at around 50 pct reduction, and maintains its stability up to additional deformation ranging from 35 to 40 pct, i.e., around 90 pct cold reduction. Thus, the life of {111}-fiber remains stable only within the range from 35 to 40 pct intermediate deformation during cold rolling of Ni-16Cr alloy irrespective of modes of rolling. However, the start and end of fiber stabilities depend on the modes of deformation by rolling. The maximum average intensity of {111}-fiber that can be attained in Ni-16Cr alloy is around 3.6× random in any of the deformation modes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. 1. R. K. Ray: Acta Metall. Mater., 1995, vol. 43, pp. 3861-3872.10.1016/0956-7151(95)90169-8 ↗
2. B. De Boer, N. Reger, B. Holzapfel, G. Gottstein, and D.A. Moldov (Eds.): First Joint International Conference on Recrystallisation and Grain Growth. Springer, Berlin, 2001b, pp. 1355–60.
3. 3. V. S. Sarma, J. Eickemeyer, C. Mickel, L. Schultz and B. Holzapfel: Mater. Sci. Engg. A, 2004, vol. 380, pp. 30-33.10.1016/j.msea.2004.05.024 ↗
4. 4. J. Hirsch, K. Lücke and M. Hartherly: Acta Metall., 1988, vol. 36, pp. 2905-2927.10.1016/0001-6160(88)90174-5 ↗
5. 5. J. Hirsch and K. Lücke: Acta Metall., 1988, vol. 36, pp. 2883-2904.10.1016/0001-6160(88)90173-3 ↗
6. 6. Y. Zhou, L. S. Toth and K. W. Neale: Acta Metall., 1992, vol. 40, pp. 3179-3193.10.1016/0956-7151(92)90481-S ↗
7. 7. T. Leffers and R. K. Ray: Progress in Materials Science, 2009, vol. 54, pp. 351-396.10.1016/j.pmatsci.2008.09.002 ↗
8. H. Hu, R. S. Cline, S. R. Goodman, and H. Margolin (eds.): Re-crystallization, Grain Growth and Textures. ASM International, Metals Park, OH, 1966.
9. 9. T. Wakefield and M. Hatherly: Met. Sci, 1981, vol. 15, pp. 109-115.10.1179/030634581790426598 ↗
10. 10. C. Bouysset and P. Coulomb: Mem. Sci. Rev. Metall, 1968, vol. 65, pp. 887-896.
11. 11. M. Matsuo: ISIJ International, 1989, vol. 29, pp. 809-827.10.2355/isijinternational.29.809 ↗
12. 12. D. Raabe: J. Mater. Sci., 1995a, vol. 30, pp. 47-52.10.1007/BF00352130 ↗
13. 13. D. Raabe: Metall. Mater. Trans. A, 1995b, vol. 26A, pp. 991-998.10.1007/BF02649096 ↗
14. 14. T. Sakai, Y. Saito and K. Kato: Trans. ISIJ, 1987, vol. 27, pp. 520-525.10.2355/isijinternational1966.27.520 ↗
15. 15. W. Truszkowski, A. Latkowski and J. Krol: J. Memb. Science Rev. Met., 1966, vol. 63, pp. 951-958.
16. 16. W. Truszkowski, J. Pospiech, M. Betzl and J. Jura: Proc. Fifth Int. Conf. Text. Mater., 1978, vol. 1, pp. 253-269.
17. 17. J. Pospiech, J. Jura, A. Mucklich, K. Palik and M. Betzl: Text. Microstruct., 1983, vol. 6, pp. 63-80.10.1155/TSM.6.63 ↗
18. 18. M. Premkumar, V.S. Himabindu, S. Banumathy, A. Bhattacharjee and A.K. Singh: Mater. Sci. and Engg. A, 2012, vol. 552, pp. 15-23.10.1016/j.msea.2012.04.077 ↗
19. 19. L.G. Schultz: J. Appl. Phys., 1949, vol. 20, pp. 1030-1033.10.1063/1.1698268 ↗
20. 20. H. J. Bunge: Texture Analysis in Materials Science, Butterworth, London, 1982.
21. K.K. Mehta, P. Mukhopadhyay, R.K. Mandal, and A.K. Singh: Metall. Mater. Trans. A, vol. 46A, pp. 3656–69.10.1007/s11661-015-2947-8 ↗
22. 22.F. J. Humphreys, M. Hatherly: Recrystallisation and Related Phenomena. Elsevier., Oxford (2004).
23. 23. J. Hirsch, E. Nes and K. Lucke: Acta Metall., 1987, vol. 35, pp. 427-438.10.1016/0001-6160(87)90249-5 ↗
24. 24. T. Leffers: In: J. Grewen, G. Wassermann (Editors), Texture in Research and Practice, Springer, Berlin, Germany, 1969, pp. 351-396.
25. 25. C. Bouysset, P. Coulomb: Mem. Sci. Rev. Metall., 1968, vol. 65, pp. 887-896.
26. 26. B. J. Duggan, M. Hatherly, W. B. Hutchinson and P. T. Wakefield: Metal Sc., 1978, vol. 12, pp. 343-351.10.1179/030634578790433909 ↗
27. 27. W. B. Hutchinson, B. J. Duggan and M. Hatherly: Metals Technol., 1979, vol. 6, pp. 398-403.10.1179/030716979803276598 ↗
28. 28. H. Hu and R. Penelle: Scripta Metall Mater, 1991, vol. 25, pp. 377-382.10.1016/0956-716X(91)90196-8 ↗
29. 29. G. D. Köhloff, H. Hu and K. Lücke: Textures Microstruct., 1991, vol. 14-18, pp. 1067-1072.10.1155/TSM.14-18.1067 ↗
30. H. Christoffersen, and T. Leffers: The relation between microstructure and crystallographic orientation in rolled copper and brass, Riso-R-1134 (EN). http://www.risoe.dk/rispubl/AFM/ris-r-1134.htm, 2002.
31. 31. T. Kamijo, K. Sekine: Metall. Trans., 1970, vol. 1, pp. 1287-1292.10.1007/BF02900245 ↗
32. 32. A. Todoyama, H. Inagaki: Mat. Sci. Forum, 2005, vol. 495-497, pp. 603.10.4028/www.scientific.net/MSF.495-497.603 ↗
33. 33. I. L. Dillamore, W. T. Roberts: Acta Metall., 1964, vol.12, pp. 281-293.10.1016/0001-6160(64)90204-4 ↗
34. 34. C. Mondal and A. K. Singh: Scripta Mater., 2012, vol. 66, pp. 674-677.10.1016/j.scriptamat.2012.01.030 ↗
35. 35. A. Storoselsky and L. Anand: J. Mech. Phys. Solids, 1998. Vol. 46, pp. 671-696.10.1016/S0022-5096(97)00071-9 ↗
36. 36. S. Myagchilov and P. R. Dawson: Model Simul. Mater. Sci. technol., 1999, vol. 7, pp. 975-1004.10.1088/0965-0393/7/6/305 ↗