Ductile Fracture Behaviour of Hot Isostatically Pressed Inconel 690 Superalloy
Source abstract
Abstract
Abstract Herein we assess the differences in Charpy impact behavior between Hot Isostatically Pressed and forged Inconel 690 alloy over the temperature range of 300 °C to − 196 °C. The impact toughness of forged 690 exhibited a relatively small temperature dependence, with a maximum difference ofca.40 J measured between 300 °C and − 196 °C, whereas the HIP’d alloy exhibited a difference of approximately double that of the forged alloy over the same temperature range. We have conducted Charpy impact testing, tensile testing, and metallographic analyses on the as-received materials as well as fractography of the failed Charpy specimens in order to understand the mechanisms that cause the observed differences in material fracture properties. The work supports a recent series of studies which assess differences in fundamental fracture behavior between Hot Isostatically Pressed and forged austenitic stainless steel materials of equivalent grades, and the results obtained in this study are compared to those of the previous stainless steel investigations to paint a more general picture of the comparisons between HIPvsforged material fracture behavior. Inconel 690 was selected in this study since previous studies were unable to completely omit the effects of strain-induced martensitic transformation at the tip of the Chary V-notch from the fracture mechanism; Inconel 690 is unable to undergo strain-induced martensitic transformation due to the alloy’s high nickel content, thereby providing a sister study with the omission of any martensitic transformation effects on ductile fracture behavior.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. H. V. Atkinson and S. Davies, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 2000, vol. 31, pp. 2981-3000.10.1007/s11661-000-0078-2 ↗
2. C. Barre, Advanced Materials and Processes 1999, vol. 155, pp. 47-48.
3. A. S. Helle, K. E. Easterling and M. F. Ashby, Acta Metallurgica 1985, vol. 33, pp. 2163-2174.10.1016/0001-6160(85)90177-4 ↗
4. Y. C. Jeon and K. T. Kim, International Journal of Mechanical Sciences 1999, vol. 41, pp. 815-830.10.1016/S0020-7403(98)00053-8 ↗
5. G. A. Rao and M. Kumar, Materials Science and Technology 1997, vol. 13, pp. 1027-1031.10.1179/mst.1997.13.12.1027 ↗
6. W.B. Burdett, P. Hurrell and A. Gilleland: In American Society of Mechanical Engineers, Pressure Vessels and Piping Conference Proceedings, (2004), pp 153–60.10.1115/PVP2004-2311 ↗
7. H. T. Larker and R. Lundberg, Journal of the European Ceramic Society 1999, vol. 19, pp. 2367–73.10.1016/S0955-2219(99)00109-0 ↗
8. M. N. Chandrasekharaiah, Sadhana 1995, vol. 20, pp. 213-232.10.1007/BF02747291 ↗
9. J.F. Lancaster: Metallurgy of Welding. (Elsevier, London, 1999).10.1533/9781845694869 ↗
10. W.J. Brayshaw, A.H. Sherry, M.G. Burke and P. James: American Society of Mechanical Engineers, Pressure Vessels and Piping Conference Proceedings 2016, pp. PVP2016-63045.
11. J.-S. Kim, B.-Y. Lee, W.-G. Hwang and S.-S. Kang: Adv. Mater. Sci. Eng. 2015, vol. 2015.
12. S. Ghosh, V. P. S. Rana, V. Kain, V. Mittal and S. K. Baveja, Materials & Design 2011, vol. 32, pp. 3823-3831.10.1016/j.matdes.2011.03.012 ↗
13. G. Byrne, M.A. Spence, B. Olsen, P.J. Houghton and J. McMahon: TWI Paper 19 1994.
14. S. Irukuvarghula, H. Hassanin, C. Cayron, M. M. Attallah, D. Stewart and M. Preuss, Acta Materialia 2017, vol. 133, pp. 269-281.10.1016/j.actamat.2017.04.068 ↗
15. A. J. Cooper, N. I. Cooper, J. Dhers and A. H. Sherry, Metallurgical and Materials Transactions A 2016, vol. 47, pp. 4467-4475.10.1007/s11661-016-3612-6 ↗
16. A. J. Cooper, N. I. Cooper, A. Bell, J. Dhers and A. H. Sherry, Metallurgical and Materials Transactions A 2015, vol. 46, pp. 5126-5138.10.1007/s11661-015-3140-9 ↗
17. A.J. Cooper, J. Dhers and A.H. Sherry: American Society of Mechanical Engineers, Pressure Vessels and Piping Conference Proceedings 2016, pp. PVP2016-63033.
18. A.J. Cooper, T.L. Burnett and A.H. Sherry: Draft Manuscript 2017.
19. D. L. Saraiva, M. Béreš, C. C. Silva, C. S. Nunes, J. J. M. Silva and H. F. G. Abreu, Materials Science and Technology 2014, vol. 30, pp. 1057-1062.10.1179/1743284714Y.0000000516 ↗
20. G. A. Rao, M. Srinivas and D. S. Sarma, Materials Science and Engineering: A 2006, vol. 435–436, pp. 84-99.10.1016/j.msea.2006.07.053 ↗
21. ASTM B168-11: Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696). (ASTM International, West Conshohocken, PA, 2016).
22. ASTM E112-96: Standard Test Methods for Determining Average Grain Size. (ASTM International, West Conshohocken, PA, 1996).
23. BS EN ISO 148-1:2010 Metallic Materials. Charpy pendulum impact test. Test method. (2010).
24. ASTM E3-01: Standard Practice for Preparation of Metallographic Specimens. (ASTM International, West Conshohocken, PA, 2001).
25. ASTM E8/E8M: Standard Test Methods for Tension Testing of Metallic Materials. (ASTM International, West Conshohocken, PA, 2010).
26. J. Tan, X. Wu, E. Han, W. Ke, X. Liu, F. Meng and X. Xu, Corrosion Science 2014, vol. 88, pp. 349-359.10.1016/j.corsci.2014.07.059 ↗
27. T.C. Jelfs and W.B. Burdett: American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 2011, pp. PVP2011-57194.
28. T. S. Byun, N. Hashimoto and K. Farrell, Acta Materialia 2004, vol. 52, pp. 3889-3899.10.1016/j.actamat.2004.05.003 ↗
29. K. Wallin, Engineering Fracture Mechanics 2002, vol. 69, pp. 451-481.10.1016/S0013-7944(01)00071-6 ↗
30. J.W. Morris: Steels for Low Temperature Applications, Technical Report, Lawrence Berkley Laboratory-University of California, 1993.
31. F.M. Beremin: Proceedings of the IUTAM Symposium on Three-Dimensional Constitutive Relations and Ductile Fracture, 1981.
32. M. G. Cockcroft and D. J. Latham, Journal Institute of Metals 1968, vol. 96, pp. 33-39.
33. F. A. McClintock, Journal of Applied Mechanics 1968, vol. 35, pp. 363-371.10.1115/1.3601204 ↗
34. M. Oyane, T. Sato, K. Okimoto and S. Shima, Journal of Mechanical Working Technology 1980, vol. 4, pp. 65-81.10.1016/0378-3804(80)90006-6 ↗
35. J. R. Rice and D. M. Tracey, Journal of the Mechanics and Physics of Solids 1969, vol. 17, pp. 201-217.10.1016/0022-5096(69)90033-7 ↗
36. V. Tvergaard and A. Needleman, Acta Metallurgica 1984, vol. 32, pp. 157–69.10.1016/0001-6160(84)90213-X ↗
37. M. Rakin, Z. Cvijovic, V. Grabulov, S. Putic and A. Sedmak, Engineering Fracture Mechanics 2004, vol. 71, pp. 813-827.10.1016/S0013-7944(03)00013-4 ↗
38. R. O. Ritchie and A. W. Thompson, Metallurgical Transactions A 1985, vol. 16, pp. 233-248.10.1007/BF02816050 ↗
39. M. Considère, Annales des Ponts et Chaussees 1885, vol. 9, pp. 574-775.
40. J.-H. Baek, Y.-P. Kim, W.-S. Kim and Y.-T. Kho, KSME International Journal 2002, vol. 16, pp. 1064-1071.10.1007/BF02984015 ↗
41. K. J. Irvine, T. Gladman and F. B. Pickering, Journal of The Iron and Steel Institute 1969, vol. 207, pp. 1017-1028.
42. K. Kako, E. Kawakami, J. Ohta and M. Mayuzumi, Materials transactions 2002, vol. 43, pp. 155-162.10.2320/matertrans.43.155 ↗
43. F. Pickering, In Materials Science and Technology, (Wiley-VCH Verlag GmbH & Co. KGaA: 2006).
44. W. Gao, K. Chen, X. Guo and L. Zhang, Materials Science and Engineering: A 2017, vol. 685, pp. 107-114.10.1016/j.msea.2016.12.128 ↗
45. C. Picker: The fracture toughness of type 316 steel and weld metal, UKAEA Working Group on Fast Reactors (IWGFR-49). Specialist Meeting on Mechanical Properties of Structural Materials Including Environmental Effects 1983.
46. J.A. Kitchener, J.M. Bockris, M. Gleiser and J.W. Evans: Acta Metall. 1953, vol. 1, pp. 93-101.10.1016/0001-6160(53)90013-3 ↗
47. J.A. Kitchener, J.M. Bockris, M. Gleiser and J.W. Evans: TransFaraday Soc 1952, vol. 48, pp. 995-997.10.1039/tf9524800995 ↗
48. W.B. Burdett: American Society of Mechanical Engineers, Pressure Vessels and Piping Conference Proceedings 2006, pp. PVP2006-ICPVT-11-93139, pp. 255–60.
49. W.B. Burdett: American Society of Mechanical Engineers, Pressure Vessels and Piping Conference Proceedings 2010, pp. PVP2010-25209, pp. 815–20.