journal article·2017-07

Microstructure and Properties of Plasma-Nitrided Fe-Based Superalloy Fe-25Ni-15Cr

Xiaolei Xu, Zhiwei Yu, Caiyun Hou, Weixiu Song, Yingzhu Wang

Publisher page

Abstract

Fe-based superalloy Fe-25Ni-15Cr was plasma nitrided at a low temperature of 723 K (450 °C). The nitrided layer was characterized by optical microscopy (OPM) and scanning electron microscopy (SEM) and X-ray diffraction (XRD) through stepwise mechanical polishing and transmission electron microscopy (TEM). The results indicated that the double expanded austenite (γ N1 and γ N2) was developed on the nitrided surface. Energy-dispersive X-ray spectrum (EDS) revealed that separate expanded austenite layers with distinctly different nitrogen contents occurred: high (18.98 to 11.49 at. pct) in the surface layer and low (5.87 to 5.32 at. pct) in the subsurface. XRD analysis indicated that large lattice expansion and distortion relative to the untreated austenite of an idea face-centered-cubic (fcc) structure occurred on the γ N1, but low expansion and less distortion on the γ N2. No obvious lattice distortion on the γ N1 was determined by calculating its electron diffraction pattern (EDP), except for detectable lattice expansion. Inconformity between XRD and EDP results suggested that the high compressive residual stress in the γ N1 was mainly responsible for the lattice distortion of the γ N1. TEM indicated that the γ N1 layer exhibited the monotonous contrast characteristic of an amorphous phase contrast to some extent, and corresponding EDP showed a strong diffuse scattering effect. It was suggested that the pre-precipitation took place in the γ N1 in the form of strongly bonded Cr-N clusters or pairs. Decomposition of the γ N1 into CrN and γ occurred at the grain boundaries, and the orientation of both phases remained cubic and cubic relationship, i.e., the planes and the directions with identical Miller indices in both phases were parallel. The nitrided surface was found to have significantly improved wear resistance. Further, the nitrided surface showed no adverse effect in the corrosion resistance but slight improvement in the 3.5 pct NaCl solution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced Materials Characterization Techniques · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Xiaolei Xu and Zhiwei Yu: Eng. Fail. Anal., 2009, vol. 16, pp. 1554–61.10.1016/j.engfailanal.2008.10.010 ↗
2. M. Olzon-Dionysio, M. Campos, M. Kapp, S. De Souza, and S.D. De Souza: Surf. Coat. Technol., 2010, vol. 204, pp. 3623–28.10.1016/j.surfcoat.2010.04.034 ↗
3. D. Manova, C. Günther, A. Bergmann, S. Mändl, H. Heumann, and B. Rauschenbach: Nucl. Instrum. Meth. Phys. Res. B, 2009, vol. 267, pp. 1536–39.10.1016/j.nimb.2009.01.075 ↗
4. Jun Wang, Yuanhua Lin, Jing Yan, Dezhi Zen, Qiang Zhang, Runbo Huang, and Hongyuan Fan: Surf. Coat. Technol., 2012, vol. 206, pp. 3399–04.10.1016/j.surfcoat.2012.01.063 ↗
5. Y. Sun, X.Y. Li, and T. Bell: J. Mater. Sci., 1999, vol. 34, pp. 4793–02.10.1023/A:1004647423860 ↗
6. M.P. Fewell, D.R.G. Mitchell, J.M. Priest, K.T. Short, and G.A. Collins: Surf. Coat. Technol., 2000, vol. 131, pp. 300–06.10.1016/S0257-8972(00)00804-5 ↗
7. T. Czerwiec, N. Renevier, and H. Michel: Surf. Coat. Technol., 2000, vol. 131, pp. 267–77.10.1016/S0257-8972(00)00792-1 ↗
8. Thomas Christiansen and Marcel A.J. Somers: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 675–82.10.1007/s11661-006-0039-5 ↗
9. Thomas Christiansen and Marcel A.J. Somers: Scripta Mater., 2004, vol. 50, pp. 35–37.10.1016/j.scriptamat.2003.09.042 ↗
10. K. Marchev, M. Landis, R. Vallerio, C.V. Copper, and B.C. Giessen: Surf. Coat. Technol., 1999, vols. 116–119, pp. 184–88.10.1016/S0257-8972(99)00296-0 ↗
11. Xiaolei Xu, Zhiwei Yu, Liying Cui, Xinjun Niu, and Tao Cai: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 801–10.
12. Matej Fonović, Andreas Leineweber, Odile Robach, Eric A. Jägle, and Eric J. Mittemejer: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 4115–31.10.1007/s11661-015-2999-9 ↗
13. Federico Augusto Pires Fernandes, Luiz Carlos Casteletti, and Juno Gallego: J. Mater. Res. Technol., 2013, vol. 2, pp. 158–64.10.1016/j.jmrt.2013.01.007 ↗
14. C. Leroy, T. Czerwiec, C. Gabet, T. Belmonte, and H. Michel: Surf. Coat. Technol., 2001, vols. 142–144, pp. 241–47.10.1016/S0257-8972(01)01243-9 ↗
15. Varshni Singh and Efstathios I. Meletis: Surf. Coat. Technol., 2006, vol. 201, pp. 1093–01.10.1016/j.surfcoat.2006.01.034 ↗
16. S. Chollet, L. Pichon, J. Cormier, J.B. Villechaise, M. Drouet, A. Declemy, and C. Templier: Surf. Coat. Technol., 2013, vol. 235, pp. 318–25.10.1016/j.surfcoat.2013.07.060 ↗
17. D.L. Williamson, J.A. Davis, and P.J. Wilbur: Surf. Coat. Technol., 1998, vols. 103–104, pp. 178–84.10.1016/S0257-8972(98)00389-2 ↗
18. F. Borgioli, A. Fossati, E. Galvanetto, T. Bacci, and G. Pradelli: Surf. Coat. Technol., 2006, vol. 200, pp. 5505–31.10.1016/j.surfcoat.2005.07.073 ↗
19. V. Raghavan: J. Phase Equilibria, 1997, vol. 18, pp. 158–72.10.1007/BF02665700 ↗
20. Orhan Öztürk and D.L. Williamson: J. Appl. Phys., 1995, vol. 77, pp. 3839–50.10.1063/1.358561 ↗
21. D.L. Williamson, O. Ozturk, R. Wei, and P.J. Wilbur: Surf. Coat. Technol., 1994, vol. 65, pp. 15–23.10.1016/S0257-8972(94)80003-0 ↗
22. Ozgur Celik, Murat Baydogan, Erdem Atar, E. Sabri Kayali, and Huseyin Cimenoglu: Mater. Sci. Eng., 2013, vol. 565A, pp. 38–43.10.1016/j.msea.2012.11.122 ↗
23. Thomas Christiansen and Marcel A.J. Somers: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1791–98.10.1007/s11661-008-9717-9 ↗
24. Y. Sun, X.Y. Li, and T. Bell: J. Mater. Sci., 1999, vol. 34, pp. 4793–02.10.1023/A:1004647423860 ↗
25. E.I. Meletis, V. Singh, and J.C. Jiang: J. Mater. Sci. Lett., 2002, vol. 21, pp. 1171–74.10.1023/A:1016504015324 ↗
26. Xiaolei Xu, Liang Wang, Zhiwei Yu, Jianbing Qiang, and Zukun Hei: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1193–99.10.1007/s11661-000-0115-1 ↗
27. H. Kahn, G.M. Michal, F. Ernst, and A.H. Heuer: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1799–04.10.1007/s11661-009-9814-4 ↗
28. M.A.J. Somers and E.J. Mittemeijer: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 189–04.10.1007/BF02656436 ↗
29. B.E. Warren: X-ray Diffraction, Dover Publications Inc., New York, 1990, pp. 251–12.
30. B.D. Cullity and S.R. Stock: X-Ray Diffraction, Prentice Hall, Upper Saddle River, NJ, 2001, pp. 284–91.
31. K. Marchev, C.V. Copper, J.T. Blucher, and B.C. Giessen: Surf. Coat. Technol., 1998, vol. 99, pp. 225–28.10.1016/S0257-8972(97)00532-X ↗
32. K. Marchev, R. Hidalgo, M. Landis, R. Vallerio, C.V. Copper, and B.C. Giessen: Surf. Coat. Technol., 1999, vol. 112, pp. 67–70.10.1016/S0257-8972(98)00802-0 ↗
33. Thomas Christiansen and Marcel A.J. Somers: Metall. Mater. Trans. A, 2007, vol. 37A, pp. 675–82.
34. J.W. Edington: Practice Electron Microscopy in Materials Science (Part II), The Macmillan Press, London, 1975, pp. 102–05.