journal article·2017-04

Characterization of Discontinuous Coarsening Reaction Products in INCONEL® Alloy 740H® Fusion Welds

Daniel H. Bechetti, John N. Dupont, Masashi Watanabe, John J. de Barbadillo

Publisher page

Abstract

Characterization of γ′ coarsened zones (CZs) in alloy 740H fusion welds via a variety of electron microscopy techniques was conducted. The effects of solute partitioning during nonequilibrium solidification on the amount of strengthening precipitates along the grain boundaries were evaluated via electron-probe microanalysis and scanning electron microscopy. Electron backscatter diffraction was used to present evidence for the preferential growth of CZs toward regions of lower γ′ content, even if growth in that direction increases grain boundary area. Scanning electron microscopy and image analysis were used to quantify the propensity for CZs to develop along certain segments of the grain boundaries, as governed by the local variations in γ′ content. Scanning transmission electron microscopy with X-ray energy-dispersive spectrometry (XEDS) was used to assess the compositions of the matrix and precipitate phases within the CZs and to quantify the segregation of alloying components to the reaction front. Thermodynamic and kinetic modeling were used to compare calculated and experimental compositions. The work presented here provides new insight into the progression of the discontinuous coarsening (DC) reaction in a complex engineering alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. D.H. Bechetti, J.N. DuPont, J.J. deBarbadillo, B.A. Baker, and M. Watanabe: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 739–55.10.1007/s11661-014-2682-6 ↗
2. D.H. Bechetti, J.N. DuPont, and J.J. deBarbadillo: Lehigh University, Bethlehem, PA, unpublished research, 2016.
3. Y. Bréchet and C. Hutchinson: in Solid State Physics: Advances in Research in Applications, vol. 60, H. Ehrenreich and F. Spaepen, eds., Elsevier, Oxford, United Kingdom, 2006, pp. 230–31.
4. J.D. Livingston and J.W. Cahn: Acta Metall., 1974, vol. 22, pp. 495–503.10.1016/0001-6160(74)90103-5 ↗
5. R.A. Fournelle: Acta Metall., 1979, vol. 27, pp. 1147–55.10.1016/0001-6160(79)90132-9 ↗
6. S. Mitao and L.A. Bendersky: Acta Mater., 1997, vol. 45, pp. 4475–89.10.1016/S1359-6454(97)00139-0 ↗
7. R. Monzen, H. Shigehara, and K. Kita: J. Mater. Sci., 2000, vol. 35, pp. 5839–43.10.1023/A:1026700222794 ↗
8. H. Azzeddine, S. Abdessameud, B. Alili, Z. Boumerzoug, and D. Bradai: Bull. Mater. Sci., 2011, vol. 34, pp. 1471–76.10.1007/s12034-011-0345-4 ↗
9. W.E. Voice and R.G. Faulkner: J. Mater. Sci., 1987, vol. 22, pp. 4221–32.10.1007/BF01132012 ↗
10. D.H. Bechetti, J.N. DuPont, S.A. Siefert, and J.P. Shingledecker: Lehigh University, Bethlehem, PA, unpublished research, 2016.
11. J.T. Armstrong: Proc. 23rd Ann. Conf. of the Microbeam Analysis Society, Milwaukee, WI, Aug. 8-12, 1988
12. Microbeam Analysis, San Francisco Press, San Francisco, CA, 1988, pp. 239-46.
13. M. Watanabe and D.B. Williams: J. Microsc., 2006, vol. 221, pp. 89–109.10.1111/j.1365-2818.2006.01549.x ↗
14. J.N. DuPont, J.C. Lippold, and S.D. Kiser: Welding Metallurgy and Weldability of Nickel-Base Alloys, 1st ed., John Wiley & Sons, Inc., Hoboken, NJ, 2011.
15. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, 2nd ed., Taylor and Francis Group, Boca Raton, FL, 1992.10.1007/978-1-4899-3051-4 ↗
16. D.H. Bechetti, J.N. Dupont, J.J. deBarbadillo, and B.A. Baker: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3051–63.10.1007/s11661-014-2243-z ↗
17. 16. S. Kou: Welding Metallurgy, 2nd ed., John Wiley & Sons, Inc., Hoboken, NJ, 2003.
18. M. Hillert: Scripta Metall., 1983, vol. 17, pp. 237–40.10.1016/0036-9748(83)90105-9 ↗
19. M. Hillert and R. Lagneborg: J. Mater. Sci., 1971, vol. 6, pp. 208–12.10.1007/BF00550014 ↗
20. D.B. Williams and E.P. Butler: Int. Mater. Rev., 1981, vol. 26, pp. 153–83.10.1179/imr.1981.26.1.153 ↗
21. 20. A.W. Funkenbusch: Metall. Trans. A, 1983, vol. 14A, pp. 1283–92.10.1007/BF02664810 ↗
22. S. Hirth and G. Gottstein: Acta Mater., 1998, vol. 46, pp. 3975–84.10.1016/S1359-6454(98)00061-5 ↗
23. A.W. Funkenbusch, T.A. Stephenson, G. McCarthy, and H. Fraser: Metall. Mater. Trans. A, 1985, vol. 16A, pp. 11–16.10.1007/BF02656706 ↗
24. A. Tavassoli and G. Colombe: Metall. Trans. A, 1978, vol. 9A, pp. 1203–11.10.1007/BF02652243 ↗
25. J. Petermann and E. Hornbogen: Z. Met., 1968, vol. 59, pp. 814–22.
26. D. Turnbull: Acta Metall., 1955, vol. 3, pp. 55–63.10.1016/0001-6160(55)90012-2 ↗
27. K. Tu and D. Turnbull: Acta Metall., 1967, vol. 15, pp. 369–76.10.1016/0001-6160(67)90214-3 ↗
28. J.W. Cahn: Acta Metall., 1959, vol. 7, 18–28.10.1016/0001-6160(59)90164-6 ↗
29. D.B. Williams and J.W. Edington: Acta Metall., 1976, vol. 24, pp. 323–32.10.1016/0001-6160(76)90007-9 ↗
30. I. Manna, S.K. Pabi, and W. Gust: Int. Mater. Rev., 2001, vol. 46, pp. 53–91.10.1179/095066001101528402 ↗
31. J.D. Nystrom, T.M. Pollock, W.H. Murphy, and A. Garg: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2443–52.10.1007/s11661-997-0001-1 ↗
32. N.D. Evans, P.J. Maziasz, R.W. Swindeman, and G.D. Smith: Scripta Mater., 2004, vol. 51, pp. 503–07.10.1016/j.scriptamat.2004.05.047 ↗
33. J.O. Andersson, T. Helander, L. Höglund, P.F. Shi, and B. Sundman: Calphad, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
34. ThermoTech TTNi7 Ni-Based Superalloys Thermodynamic Database Version 7, ThermoTech, Ltd., Guildford, United Kingdom, 2006.
35. Thermo-Calc Software MOB2 TCS Alloy Mobility Database, Thermo-Calc Software AB, Stockholm, Sweden.
36. G. Smith and L. Shoemaker: Adv. Mater. Process., 2004, vol. 162, pp. 23–26.
37. C.Y. Ma, E. Rabkin, W. Gust, and S.E. Hsu: Acta Metall. Mater., 1995, vol. 43, pp. 3113–24.10.1016/0956-7151(95)00011-J ↗
38. W.W. Mullins: Acta Metall., 1956, vol. 4, pp. 421–32.10.1016/0001-6160(56)90033-5 ↗
39. E. Hornbogen: Metall. Trans., 1972, vol. 3, pp. 2717–27.10.1007/BF02652839 ↗
40. 39. R.D. Knutsen, C.I. Lang, and J.A. Basson: Acta Mater., 2004, vol. 52, pp. 2407–17.10.1016/j.actamat.2004.01.031 ↗
41. 40. D.H. Ping, Y.F. Gu, C.Y. Cui, and H. Harada: Mater. Sci. Eng. A, 2007, vol. 456, pp. 99–102.10.1016/j.msea.2007.01.090 ↗