journal article·2016-08

A Study of the Oscillation Marks’ Characteristics of Continuously Cast Incoloy Alloy 825 Blooms

Saud Saleem, Michael Vynnycky, Hasse Fredriksson

Publisher page

Abstract

A comprehensive experimental study of oscillation mark (OM) formation and its characteristics during the solidification of Incoloy alloy 825 in the continuous casting of blooms is investigated by plant trials and metallographic study. The experiments involved two heats with the same casting and mold conditions and sampling at different locations across the strand. The metallographic study combined macro/micro-examinations of OMs and segregation analysis of Cr, Mn, Mo, Ni, and Si by microprobe analysis. The results show that OMs have widely different characteristics, such as mark type, depth, segregation, and accompanying microstructure. Furthermore, the mark pitch can vary considerably even for the similar casting conditions, leading to different conditions for the marks’ formation in relation to the mold’s cyclic movement. Finally, a mechanism for the OM formation is discussed and proposed. Possible solutions for minimizing the observed defects by optimizing the mold conditions are suggested.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Lubrication Engineering · Engineering Technology and Methodologies · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. E. Takeuchi and J. Brimacombe: Metall. Trans. B., 1984, vol. 15B, pp. 493-509.10.1007/BF02657380 ↗
2. J. Elfsberg, B. Widell and H. Fredriksson: 4th European Continuous Casting Conference, Birmingham, October 14–16, 2002, IOM, England.
3. J. Sengupta, H. J Shin, B. G. Thomas and S. H. Kim: Acta Materialia, 2006, vol. 54, pp. 1165–117310.1016/j.actamat.2005.10.044 ↗
4. P. Lundkvist and B. Bergquist: Ironmaking and Steelmaking, 2014, vol. 34, pp. 304-309.10.1179/1743281213Y.0000000132 ↗
5. K. Schwerdtfeger and H. Sha: Metall. Trans. B., 2000, vol. 31B, pp. 813-826.10.1007/s11663-000-0118-8 ↗
6. T. Emi, H. Nakato, Y. Iida, K. Emoto, R. Tachibana, T. Imai et al.: Proc. National Open Hearth Basic Oxygen Steel Conf., 1978, vol. 61, pp. 250–361.
7. E. Takeuchi and J. Brimacombe: Metall. Trans. B., 1985, vol. 16B, pp. 605-625.10.1007/BF02654859 ↗
8. S. Harada, S. Tanaka, H. Misumi, S. Mizoguchi and S. Horiguchi: ISIJ Int., 1990, vol. 30, pp. 310–31610.2355/isijinternational.30.310 ↗
9. H. Yamamura, Y. Mizukami, K. Misawa: ISIJ Int. (Suppl), 1996, vol. 36, pp. S223-S226.10.2355/isijinternational.36.Suppl_S223 ↗
10. A. Yamauchi, S. Itoyama, Y. Kishimoto, H. Tozawa and K. Sorimachi: J. ISIJ Int., 2002, vol. 42, pp. 1094-1102.10.2355/isijinternational.42.1094 ↗
11. J. Brimacombe, S. Kumar, C.O. Hlady, and I.V. Samarasekera: Proc. of the 1st International Chromium Steel and Alloys Congress, Cape Town, SAIMM, Johannesburg, 1992, vol. 2, pp. 7–23.
12. H. Nakato, T. Nozaki, S. Ogura, and H. Morishita: Kawasaki Steel Technical Report No. 14, 1986, pp. 31–41.
13. T. Kuwano, N. Shigematsu, F. Hoshi and H. Ogiwara: 4th International Iron and Steel Institute Conference, Metal Society, London, 1982, pp. 8.1–8.15.
14. J. Lima, J. Brimacombe and I. V. Samarasekera: Ironmaking and Steelmaking, 1991, vol. 18, pp. 114-127.
15. K. Ayata, H. Nakata, J. Miyazaki, T. Nozaki and T. Mori, ‘Development of horizontal continuous caster for steel billets’, 68th Steelmaking Conference Proceedings, 1985, ISS, Warrendale, PA, pp. 463-470.
16. H. Fredriksson and J. Elfsberg: Scand. J. Metall., 2002, vol. 31, pp. 292-297.10.1034/j.1600-0692.2002.00519.x ↗
17. J. Elfsberg: Lic. Eng. Thesis, Royal Institute of Technology, Stockholm, Sweden, 2003.
18. P. E. R. Lopez, K. C. Mills, P. D. Lee and B. Santillana, Metall. Trans B, 2012, vol. 43B, pp. 109-122.10.1007/s11663-011-9583-5 ↗
19. B. Rogberg: Private Communications, Sandvik Materials Technology AB, Sandvik, Sweden, 2013.
20. J. J. Bikerman (1970) Physical Surfaces, Physical Chemistry, vol 20. Elsevier, New York
21. J. Sengupta, B.G. Thomas, H. Shin, G. Lee and S. Kim: Metall. Trans A, 2005, vol. 37A, pp. 1597-1611.
22. A. Badri, T. T. Natarajan, C.C. Snyder, K.D. Powers, F.J. Mannion and A.W. Cramb: Metall. Trans. B, 2005, vol. 36B, pp. 355-71.10.1007/s11663-005-0065-5 ↗