journal article·2016-04

Ultrasonic Fatigue Endurance of Thin Carbon Fiber Sheets

Gonzalo M. Domínguez Almaraz, Julio A. Ruiz Vilchez, Aymeric Dominguez, Yann Meyer

Publisher page

Abstract

Ultrasonic fatigue tests were carried out on thin carbon fiber sheets (0.3 mm of thickness) to determine the fatigue endurance under very high-frequency loading (20 kHz). This material, called the gas diffusion layer (GDL), plays a major role in the overall performances of proton exchange membrane fuel cells (PEMFCs). The study of its physical–chemical properties is an on-going subject in the literature; nevertheless, no knowledge is available concerning the high-frequency fatigue endurance. A principal difficulty in carrying out ultrasonic fatigue tests on this material was to determine the dimensions of testing specimen to fit the resonance condition. This aspect was solved by modal numerical simulation: The testing specimen has been a combination of a low-strength steel frame (to facilitate the attachment to the ultrasonic machine and to increase the mass of the specimen), and the carbon fiber hourglass-shape profile. Under resonance condition, a stationary elastic wave is generated along the specimen that induces high stress at the neck section and high displacements at the ends. Results show that fatigue life was close to 3 × 108 cycles when the high Von Misses stress at the neck section was 170 MPa, whereas fatigue life attains the 4.5 × 109 cycles when stress decreases to 117 MPa. Crack initiation and propagation were analyzed, and conclusions were drawn concerning the fatigue endurance of these fiber carbon sheets under ultrasonic fatigue testing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Smart Materials for Construction · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. M. Blanco, D.P. Wilkinson, H. Wang, and S.S.S. Liu: ECS Trans., 2009, vol. 25, pp. 1507-18.10.1149/1.3210707 ↗
2. A.J. Jacobson: Chem. Mater., 2010, vol. 22, pp. 660-74.10.1021/cm902640j ↗
3. P.-A. Gigos, Y. Faydi, and Y. Meyer: Int. J. Hydrogen Energy, 2015, vol. 40, pp. 5958-65.10.1016/j.ijhydene.2015.02.136 ↗
4. F. Van Hove, M. Lauritzen, J. Kolodziej, G.G. Wang, S. Holdcroft, and E. Kjeang: J. Power Source., 2014, vol. 257, pp. 102-10.10.1016/j.jpowsour.2014.01.106 ↗
5. X. Zhang and Z. Shen: Fuel, 2002, vol. 81, no. 17, pp. 2199-201.10.1016/S0016-2361(02)00166-7 ↗
6. G.M. Dominguez Almaraz and R.P. Mora: Int. J. Damage Mech., 2013, vol. 22, no. 6, pp. 860-77.10.1177/1056789512468913 ↗
7. G.M. Dominguez-Almaraz, A. Dueñas-Aburto, and E. Correa-Gómez: Metall. Mater. Trans. A, 2014, vol. 45, pp. 280-6.10.1007/s11661-013-1983-5 ↗
8. D.S. Paolino, A. Tridello, G. Chiandussi, and M. Rossetto: Fat. Fract. Eng. Mater. Struct., 2014, vol. 37, no. 5, pp. 570-910.1111/ffe.12149 ↗
9. G.M. Dominguez-Almaraz: Mater. Perf. Charact., 2015, vol. 4, no. 1, pp. 45-60.10.1520/MPC20140064 ↗
10. G.M. Dominguez-Almaraz, E. Correa-Gomez, F.M. Zeidan, E.R. Mena-Mena: Int. J. Emerg. Technol. Adv. Eng. 2013, vol. 3, no. 11, pp. 404-9.
11. P. Bajons and W. Kromp: Ultrasonics, 1978, vol. 16, no. 5, pp. 213-7.10.1016/0041-624X(78)90019-7 ↗
12. A. Puškár: Ultrasonics, 1993, vol. 31, no. 1, pp. 61-7.10.1016/0041-624X(93)90034-W ↗
13. S. Ghosh, Y. Ling, B. Majumdar, and R. Kim: Mech. Mater., 2000, vol. 32, no. 10, pp. 561-91.10.1016/S0167-6636(00)00030-2 ↗
14. J. Jäger, M.G.R. Saus, F. Burkert, W.-J. Moosburger-Will, M. Greisel, and S. Horn: Composites A, 2015, vol. 71, pp. 157-67.10.1016/j.compositesa.2015.01.011 ↗
15. J. Brunbauer and G. Pinter: Int. J. Fatigue 2015, vol. 75, pp. 28-38.10.1016/j.ijfatigue.2015.01.014 ↗
16. G. Kalinka, A. Leistner, and A. Hampe: Compos. Sci. Technol., 1997, vol. 57, pp. 845-51.10.1016/S0266-3538(96)00159-5 ↗
17. J. Sha, J. Dai, J. Li, Z. Wei, J.-M. Hausherr, and W. Krenkel: J. Compos. Mater., 2014, vol. 48, no. 11, pp. 1303-11.10.1177/0021998313485264 ↗
18. N. Chandra and H. Ghonem: Composites A, 2001, vol. 32, pp. 575-84.10.1016/S1359-835X(00)00051-8 ↗
19. B. Guichet, J.-C. Sangleboeuf, A. Vassel, and T. Bretheau: Key Eng. Mater., 1998, vols. 127-31, pp. 651-658.
20. S. Suo: J. Vac. Sci. Technol. A, 1993, vol. 1184, pp. 1367-72.10.1116/1.578555 ↗
21. J.A. Nairn: Adv. Compos. Lett., 2000, vol. 9, pp. 373-83.10.1177/096369350000900601 ↗
22. S. Zhandarov, E. Mäder, and O.R. Yukevish: J. Adhes. Sci. Technol., 2002, vol. 16, pp. 1171–1200.10.1163/156856102320256837 ↗
23. D.-A. Mendels, Y. Leterrier, and J.-A.E. Manson: J. Compos. Mater., 2002, vol. 36, pp. 347–63.10.1177/0021998302036003508 ↗
24. American Society for Testing and Materials: Annual book of ASTM standards. Vol. 03.01, E647. 1983, American Society for Testing and Materials: Philadelphia.
25. J.C. Newman and I.S. Raju: Eng. Fract. Mech., 1981, vol. 15, pp. 185-92.10.1016/0013-7944(81)90116-8 ↗
26. H. Sekine and P.W.R. Beaumont: J. Mater. Sci., 2010, vol. 45, pp. 5988-5992.10.1007/s10853-010-4802-z ↗