High-Temperature Oxidation Resistance of a Nanoceria Spray-Coated 316L Stainless Steel Under Short-Term Air Exposure
Source abstract
Abstract
Nanoceria coatings using a spray method were implemented on a 316L stainless steel (SS). Coated and uncoated coupons were exposed to dry air at 1073 K to 1273 K (800 °C to 1000 °C) for short time periods (up to 24 hours) and in situ measurements of oxidation were carried out using a highly sensitive thermogravimetric balance. From the experimental outcome, activation energies were determined in both, coated and uncoated 316 SS coupons. The estimated exhibited activation energies for oxidation in the coated and uncoated conditions were 174 and 356 kJ/mol, respectively. In addition, the developed scales were significantly different. In the coated steel, the dominant oxide was an oxide spinel (Fe, Mn)3O4 and the presence of Fe2O3 was sharply reduced, particularly at 1273 K (1000 °C). In contrast, no spinel was found in the uncoated 316L SS, and Fe2O3 was always present in the scale at all the investigated oxidation temperatures. The coated steels developed a highly adherent fine-grained scale structure. Apparently, the nanoceria particles enhanced nucleation of the newly formed scale while restricting coarsening. Coarse grain structures were found in the uncoated steels with scale growth occurring at grain ledges. Moreover, the oxidation rates for the coated 316L SS were at least an order of magnitude lower than those exhibited by the steel in the uncoated condition. The reduction in oxidation rates is attributed to a shift in the oxidation mechanism from outward cation diffusion to inward oxygen diffusion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · High-Temperature Coating Behaviors · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. N. Birks, G. H. Meier, and F. S. Pettit: Introduction to the high temperature oxidation of Metals. Second Edition, Cambridge University Press, London, 2006.10.1017/CBO9781139163903 ↗
2. T. Maruyama, M. Yoshiba, K. Kurokawa, Y. Kawahara and N. Otsuka, Mat. Sci. Forum, vol. 696, 2011, pp. 1-440.10.4028/www.scientific.net/MSF.696.1 ↗
3. R. A. Rapp, Metall. Trans. B, vol. 15B, 1984, pp. 105-112.
4. P. Kofstad: High Temperature Oxidation of Metals. Wiley, New York, NY, 1966.
5. P. Kofstad, K. P. Lillerud, J. Electrochem. Soc. Vol. 127, 1980, pp. 2410-2419.10.1149/1.2129481 ↗
6. A. C. S. Sabioni, A. M. Huntz, F. Millot, and C. Monty, Philos. Mag. A, 66, 1992, pp. 361-74.10.1080/01418619208201562 ↗
7. G. Bamba, Y. Wouters, A. Galerie, F. Charlot and A. Dellali, Acta Materialia, vol. 54, 2006, pp. 3917-3922.10.1016/j.actamat.2006.04.023 ↗
8. C.E.R de Carvalho, G.M. da Costa, A.B. Cota, and E. H. Rossi, Mater. Res., 9, 2006, pp. 393–97.10.1590/S1516-14392006000400009 ↗
9. L. Mikkelsen,P. H. Larsen and S. Linderoth, J. Thermal Analysis and Calorimetry, vol. 64, 2001, pp. 879-886.10.1023/A:1011546209235 ↗
10. A. Claret, S. Sabioni, A. Huntz, E. C. da Luz, M. Mantel and C. Haut, Mat. Res. vol. 6, 2003, pp. 179-185.10.1590/S1516-14392003000200012 ↗
11. A. A. Moosa, M. K. Abbas and R. Mohammed, Eng. & Tech., vol. 25, 2007, pp. 918-939.10.30684/etj.25.7.9 ↗
12. V. Viswanathan, R. Filmalter, S. Patil, S. Deshpande and S. Seal, J. Am. Ceram. Soc., vol. 90, 2007, pp. 870-877.10.1111/j.1551-2916.2006.01463.x ↗
13. F. Czerwinski and J.A. Szpunar, J. Sol Gel Sci. Technol. 9, 1997, pp 103-114.
14. F. Czerwinski and J. A. Szpunar, Thin Solid Films, vol. 289, 1996, pp. 213–19.10.1016/S0040-6090(96)08911-0 ↗
15. S. Roure, E. Czerwinski and A. Petric, Oxid. Met., vol. 42, 1994, pp. 75-102.10.1007/BF01061925 ↗
16. F. Czerwinski and W.W. Smeltzer, Oxid. Met. vol. 40, 1993, pp. 503-527.10.1007/BF00666389 ↗
17. R. Thanneeru, S. Patil, S. Deshpande and S. Seal, Acta Materialia, vol. 55, 2007, pp. 3457-3466.10.1016/j.actamat.2007.01.043 ↗
18. D. P. Moon and M. J. Bennett, Mater. Sci. Forum, vol. 43, 1989, pp. 269-298.10.4028/www.scientific.net/MSF.43.269 ↗
19. E. A. Polman, T. Fransen and P. J. Gellings, J. Phys. Condens. Matter, vol. 1, 1989, pp. 4497-4510.10.1088/0953-8984/1/28/001 ↗
20. L.B. Pfeil, U.K. Patent No. 459848, 1937.
21. J. Stringer, Mater. Sci. Eng. A, vol.120, 1989, pp. 129–37.10.1016/0921-5093(89)90730-2 ↗
22. D. P. Moon, Mater. Sci. Technol. vol. 5, 1989, pp. 754-60.10.1179/mst.1989.5.8.754 ↗
23. B. A. Pint, Oxid. Met.,vol. 45, 1996, pp. 1-37.10.1007/BF01046818 ↗
24. Y. Saito, B. Onay, T. Maruyama, J. Phys. IV, vol. 3, 1993, pp. 217-225.
25. S. Chevalier and J. P. Larpin, Acta Materialia, vol. 50, 2002, pp. 3107-3116.10.1016/S1359-6454(02)00106-4 ↗
26. T.A. Ramanarayanan, J.D. Mumford, C.M. Chun, and R.A. Petkovic, Solid State Ionics vol .136-137, 2000, pp. 83-90.10.1016/S0167-2738(00)00355-6 ↗
27. R.J. Hussey, P. Papajacovouv, J. Shen, D.F. Mitchell, and M.J. Graham, Mater. Sci. Eng. A, vol. 120A, 1989, pp. 147-151.10.1016/0921-5093(89)90732-6 ↗
28. S. Seal, S. K. Bose and S. K. Roy, Oxid. Met., vol. 41, 1994, 139-178.10.1007/BF01196647 ↗
29. S. Seal, S.K. Roy, S.K. Bose, and S.C. Kuiry, JOM 52 (1), 2000, 163–77.
30. H.F. Lopez and H. Mendoza-Del-Angel: Symposium 5 Advanced Materials, XIX International Congress of Materials Research, August 15–19, Cancun 2010, vol. 1276, pp. 123–28.
31. Z. Wu, Lin Guo, H. Li, R. E. Benfield, Q. Yang, D. Grandjean, Q. Liand, and H. Zhu, J. Phys. Condens. Matter, vol 13, 2001, pp. 5269-5284.10.1088/0953-8984/13/22/320 ↗
32. S. Patil, S. C. Kuiry, S. Seal and R. Vanfleet, J. Nanopart. Res. vol. 4, 2002, pp. 433-438.10.1023/A:1021696107498 ↗
33. H.F. Lopez: MRS Conference Proceedings, Symposium 5 Advanced Materials, XVIII International Congress of Materials Research, August 16–20, Cancun 2009, vol. 1243, 21–28.
34. H. Zhang: Ph.D. Dissertation, University of Wisconsin-Milwaukee, 2007.
35. S. Tsunekawa, K. Ishikawa, Z. Q. Li, Y. Kawazoe and A. Kasuya,Phys. Rev. Lett., vol. 85, 2000, pp. 3440-3443.10.1103/PhysRevLett.85.3440 ↗
36. X. D. Zhou and W. Huebner, Appl. Phys. Lett., vol 79, 2001, pp. 3512-14.10.1063/1.1419235 ↗
37. E.M. Levin, R. Sidney Roth, C.R. Robbins, and H.F. McMurdie, eds.: Phase Diagrams for Ceramists, vol. 5, The American Ceramic Society, Columbus, OH, 1983.
38. N. Patibandla, T. A. Ramanarayanan and F. Cosandey, J. Electrochem. Soc. vol. 138, 1991, pp. 2176-2184.10.1149/1.2085946 ↗
39. H. Nagai and M. Okabayashi, J. Trans. Japan Inst. Metals vol. 22, 1982, pp. 101-08.
40. S.R. Challa, A. Delariva, and A.K. Datye: 22th North Mtg., Detroit, MI, June 5–10, 2011.
41. C.T. Campbell, S.C. Parker, and D.R. Starr, Science, vol 298, 2002, pp. 811-814.10.1126/science.1075094 ↗
42. P. Kofstad: High Temperature Corrosion, Elsevier, London, 1988, pp. 1-55.
43. D. M. Duffy and P. W. Tasker, Phil. Mag., vol 54, 1986, pp. 759-77.10.1080/01418618608244435 ↗
44. A.C.S. Sabioni, A.M. Huntz, F. Millot, and C. Monty, Philos. Mag. A, vol. 66, 1992, pp. 351-360.10.1080/01418619208201561 ↗
45. A. C. S. Sabioni, B. Lesage, A. M. Huntz, J. C. Pivin, and C. Monty, Philos. Mag. A, vol. 66, 1992, pp. 333-350.10.1080/01418619208201560 ↗