journal article·2014-03

Anisotropy of Dynamic Compressive Properties of Non-Heat-Treating Cold-Heading-Quality Steel Bars

Hyunmin Kim, Minju Kang, Chul Min Bae, Hyoung Seop Kim, Sunghak Lee

Publisher page

Abstract

In the current study, a non-heat-treating cold-heading-quality steel bar was fabricated by cold drawing of a rolled bar, and anisotropic mechanical properties of the as-rolled and cold-drawn bars were investigated by quasistatic and dynamic compressive tests of 0 deg (longitudinal)-, 45 deg-, and 90 deg (transverse)-orientation specimens. Under the dynamic compressive loading, the trend of strength variation was similar to that of the quasistatic compressive loading, while the strength level was considerably increased by the strain rate hardening effect. Stress–strain curves of the cold-drawn bar specimens showed the nearly same strain hardening behavior, irrespective of specimen orientation and strain rate, but the yield stress and compressive flow stress increased in the order of the 0 deg-, 90 deg-, and 45 deg-orientation specimens. In the 45 deg- and 90 deg-orientation specimens, the pearlite bands had the stronger resistance to the stress acting on the maximum shear stress plane than in the 0 deg-orientation specimens, thereby resulting in the higher strengths. In some dynamically compressed specimens, pearlite bands were dissolved to form bainitic microstructures. Locations of these bainitic microstructures were well matched with hemispherical-shaped heat-trap zones, which confirmed that bainitic microstructures were formed by the temperature rise occurring during the dynamic compressive loading.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High-Velocity Impact and Material Behavior · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. A. Iwama and I. Nomura: U.S. Patent 5,362,338, 1994.
2. A. Inada, N. Yoshihara, and N. Ibaraki: U.S. Patent 6,206,984 B1 (Mar. 27, 2001).
3. K.-H. Kim, S.-D. Park, J.-H. Kim, and C.-M. Bae: Met. Mater. Int., 2012, vol. 18, pp. 917-21.10.1007/s12540-012-7002-3 ↗
4. C. Jing, D.-W. Suh, C.-S. Oh, Z. Wang, and S.-J. Kim: Met. Mater. Int., 2007, vol. 13, pp. 13-19.10.1007/BF03027817 ↗
5. H.-B. Ryu, J.G. Speer, and J.P. Wise: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2811-16.10.1007/s11661-002-0266-3 ↗
6. C.G. Lee, S.-J. Kim, T.-H. Lee, and S. Lee: Mater. Sci. Eng., 2004, vol. A371, pp. 16-23.10.1016/S0921-5093(03)00035-2 ↗
7. D.A. Curry: Nature, 1978, vol. 276, pp. 50-51.10.1038/276050a0 ↗
8. R.O. Ritchie, J.F. Knott, and J.R. Rice: J. Mech. Phys. Solids, 1873, vol. 21, pp. 395-410.10.1016/0022-5096(73)90008-2 ↗
9. D.A. Curry and J.F. Knott: Met. Sci., 2006, vol. 437, pp. 335-43.
10. E. Pessard, F. Morel, and A. Morel: Adv. Eng. Mater., 2009, vol. 11, pp. 732-35.10.1002/adem.200900040 ↗
11. S.I. Kim and Y. Lee: Met. Mater. Int., 2012, vol. 18, pp. 735-44.10.1007/s12540-012-5001-z ↗
12. O.A. Gunbina, V.N. Kopylov, I.N. Razuvaeva, and A.S. Shibanov: Met. Sci. Heat Treat., 1993, vol. 35, pp. 682-86.10.1007/BF00707638 ↗
13. M.O. Lai and H.S. Fong: J. Mater. Sci. Lett., 1989, vol. 8, pp. 1257-59.10.1007/BF00721484 ↗
14. L. Caballero, J.M. Atienza, and M. Elices: Met. Mater. Int., 2011, vol. 17, pp. 899-910.10.1007/s12540-011-6006-8 ↗
15. V.P. Gorbatenko and A.V. Lukin: Steel Transl., 2010, vol. 40, pp. 923-27.10.3103/S096709121010013X ↗
16. Y.J. Park and I.M. Bernstein: Metall. Trans. A, 1979, vol. 10A, pp. 1653-64.10.1007/BF02811698 ↗
17. D.A. Porter and K.E. Easterling: Acta Metall., 1978, vol. 26, pp. 1405-22.10.1016/0001-6160(78)90156-6 ↗
18. H. Kim, M. Kang, H.J. Jung, H.S. Kim, C.M. Bae, and S. Lee: Mater. Sci. Eng., 2013, vol. A571, pp. 38-48.10.1016/j.msea.2013.02.011 ↗
19. G.E. Dieter: Mechanical Metallurgy, SI Metric, McGraw-Hill Book Co., New York, 1976, pp. 616–50.
20. E.D.H. Davies and S.C. Hunter: J. Mech. Phys. Solids, 1963, vol. 11, pp. 155-79.10.1016/0022-5096(63)90050-4 ↗
21. W. Chen and B. Song: Split Hopkinson (Kolsky) Bar—Design, Testing, and Applications, Springer, New York, 2011.10.1007/978-1-4419-7982-7 ↗
22. S. Shanmugama, R.D.K. Misra, T. Mannering, D. Panda, and S.F. Jansto: Mater. Sci. Eng., 2006, vol. A437, pp. 436-45.10.1016/j.msea.2006.08.007 ↗
23. S. Shanmugama, N.K. Ramisetti, R.D.K. Misra, T. Mannering, D. Panda, and S.F. Jansto: Mater. Sci. Eng., 2007, vol. A460-A461, pp. 335-43.10.1016/j.msea.2007.01.054 ↗
24. T. Yamane, K. Hisayuki, Y. Kawazu, T. Takahashi, and Y. Kimura: J. Mater. Sci., 2002, vol. 37, pp. 3875-79.10.1023/A:1019695104094 ↗
25. R. Anumolu, B. Ravi Kumar, R.D.K. Misra, T. Mannering, D. Panda, and S.F. Jansto: Mater. Sci. Eng., 2008, vol. A491, pp. 55–61.10.1016/j.msea.2008.01.008 ↗
26. W.Y. Choo and J.Y. Lee: Metall. Trans. A, 1982, vol. 13A, pp. 135-40.10.1007/BF02642424 ↗
27. J. Languillaume, G. Kapelski, and B. Baudelet: Acta Mater., 1997, vol. 45, pp. 1201-12.10.1016/S1359-6454(96)00216-9 ↗
28. J.M. Hyzak and I.M. Bernstein: Metall. Trans. A, 1976, vol. 7A, pp. 1217-24.10.1007/BF02656606 ↗
29. K. Lee, S.-B. Lee, S.-K. Lee, and S. Lee: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 867-76.
30. K. Lee, S.-B. Lee, S.-K. Lee, and S. Lee: Mater. Sci. Eng., 2010, vol. A527, pp. 1875-81.10.1016/j.msea.2009.11.055 ↗
31. C.G. Lee, D. Kwon, and S. Lee: Scripta Metall., 1994, vol. 30, pp. 197-202.10.1016/0956-716X(94)90039-6 ↗
32. A.G. Odeshi, S. Al-ameeri, and M.N. Bassim: J. Mater. Process. Technol., 2005, vol. 162-163, pp. 385-91.10.1016/j.jmatprotec.2005.02.157 ↗
33. C.-S. Huang, S.-H. Wang, W.-S. Lee, T.-H. Chen, and C. Lien: Scripta Mater., 2005, vol. 52, pp. 843-49.10.1016/j.scriptamat.2005.01.010 ↗
34. K.A. Hartley, J. Duffy, and R.H. Hawley: J. Mech. Phys. Solids, 1987, vol. 35, pp. 283-301.10.1016/0022-5096(87)90009-3 ↗
35. F.B. Pickering: Steels: Metallurgical Principles, Encyclopedia of Materials Science and Engineering, vol. 6, The MIT Press, Cambridge, 1986.
36. K.W. Andrews: J. Iron Steel Inst., 1965, vol. 203, pp. 721-27.
37. W. Steven and A.G. Haynes: J. Iron Steel Inst., 1956, vol. 183, pp. 349-59.
38. S. Thompson and P. Howell: Mater. Sci. Technol., 1992, vol. 8, pp. 777-84.10.1179/mst.1992.8.9.777 ↗
39. T. Majka, D. Matlock, and G. Krauss: Metall. Mater. Trans. A, 2003, vol. 33A, pp. 1627-37.
40. N.S. Lim, H.S. Park, S.I. Kim, and C.G. Park: Met. Mater. Int., 2012, vol. 18, pp. 647-54.10.1007/s12540-012-4012-0 ↗
41. Y.-S. Jung, Y.-K. Lee, D.K. Matlock, and M.C. Mataya: Met. Mater. Int., 2011, vol. 17, pp. 553-56.10.1007/s12540-011-0804-x ↗