journal article·2006-12

The drag force on a particle approaching a solidifying interface

Layachi Hadji

Publisher page

Abstract

Lubrication theory is applied to derive an expression for the drag force on a particle approaching a directionally solidified interface. To the leading order in the Peclet number, the thermal and hydrodynamic problems are uncoupled. The former yields an equation for the front’s curvature, the solution of which gives the interface profile. The drag force is obtained by solving the lubrication equations in the gap between the particle and the interface. In the absence of shrinkage flow, the force is due solely to the particle’s movement. The dependence of the drag on the parameters, such as the thermal gradient, the latent heat of fusion, and the ratio of the particle’s thermal conductance to that of the melt. α, is explicitly depicted. We find that the drag increases with α, so that perfectly insulated particles experience less drag than highly conducting particles. The variation of the drag force with the thermal gradient also depends on the thermal conductance ratio α. Furthermore, it is noted that the fluid drag force derived here resembles the Taylor’s lubrication force that resists the approach between two rigid surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Heat and Mass Transfer in Porous Media · Solidification and crystal growth phenomena · Granular flow and fluidized beds

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. A.R. Kennedy and T.W. Clyne: Cast Met., 1991, Vol. 4, pp. 160–64.10.1080/09534962.1991.11819073 ↗
2. K.A. Jackson and B. Chalmers: J. Appl. Phys., 1958, vol. 29, pp. 1178–81.10.1063/1.1723397 ↗
3. C. Korber, G. Rau, M.D. Cosman, and E.G. Cravalho: J. Cryst. Growth, 1985, vol. 72, pp. 649–62.10.1016/0022-0248(85)90217-9 ↗
4. A. Endo, H.S. Chauhan, T. Egi, and Y. Shiohara: J. Mater. Sci., 1996, vol. 11, pp. 795–803.
5. M. Carin, and M. Jaeger: Eur. Phys. J.A.P. 2001, vol. 16, pp. 231–38.10.1051/epjap:2001205 ↗
6. A.A. Chernov, and D.E. Temkin: Current Topics in Materials Science, E. Kaldis and H.J. Scheel, eds., North Holland, New York, NY, 1977, vol. 2, pp. 3–77.
7. A. Mortensen, and I. Jin: Int. Mater. Rev., 1992, vol. 37, pp. 101–28.10.1179/imr.1992.37.1.101 ↗
8. D. Li, and A.W. Neumann: in Applied Surface Thermodynamics, A.W. Neumann and J.K. Spelt, eds., Dekker, New York, NY. 1996, vol. 63, pp. 557–629.
9. A.M. Zubko, V.G. Lobanov, and V.V. Nikonova: Sov. Phys. Crystallogr., 1973, vol. 18, pp. 239–41.
10. R.G. Cox and H. Brenner: Chem. Eng. Sci., 1967, vol. 22, pp. 1753–77.10.1016/0009-2509(67)80208-2 ↗
11. G. Leal, Laminar Flow and Convective Transport Processes, Scaling Principles and Asymptotic Analysis, Butterworth-Heinemann, Boston, MA, 1992, pp. 401–06.
12. A.A. Chernov, D.E. Temkin, and A.M. Mel'nikova: Sov. Phys. Crystallogr., 1977, vol. 22, pp. 656–60.
13. D.M. Stefanescu, B.K. Dhindaw, S.A. Kacar, and A. Moitra: Metall. Trans. A. 1988, vol. 19, pp. 2847–55.10.1007/BF02645819 ↗
14. D. Shanguuan, and D.M. Stefanescu: Metall. Trans. A, 1992, vol. 23, pp. 669–90.10.1007/BF02801184 ↗
15. S. Sen, W.F. Kaukler, P. Curreri, and D.M. Stefanescu: Metall. Trans. A, 1997, vol. 28, pp. 2129–35.10.1007/s11661-997-0170-y ↗
16. A.V. Catalina, S. Mukherjee, and D.M. Stefanescu: Metall. Mater. Trans. A, 2000, vol. 31, pp. 2559–68.10.1007/s11661-000-0200-5 ↗
17. J.W. Garvin, and H.S. Udaykumar: J. Cryst. Growth. 2003, vol. 252, pp. 467–79.10.1016/S0022-0248(03)00943-6 ↗
18. J.W. Garvin, and H.S. Udaykumar: J. Cryst. Growth. 2004, vol. 267, pp. 724–34.10.1016/j.jcrysgro.2004.03.074 ↗
19. J.W. Garvin, and H.S. Udaykumar: J. Cryst Growth, 2005, vol. 276. pp. 275–80.10.1016/j.jcrysgro.2004.10.058 ↗
20. H.S. Carslaw, and J.C. Jaeger: Conduction of Heat in Solids, 2nd ed., Clarendon Press, Oxford, United Kingdom, 1959, pp. 426–28.
21. J.S. Langer: Rev. Mod. Phys., 1980, vol. 52, pp. 1–27.10.1103/RevModPhys.52.1 ↗
22. W. Hardy, and I. Bircumshaw: Proc. R. Soc. London, Ser. A, 1925. vol. 108, pp. 1–27.10.1098/rspa.1925.0056 ↗
23. D.M. Stefanescu, R.V. Phalnikar, H. Pang, S. Ahuja, and B.K. Dhindaw: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 700–07.10.2355/isijinternational.35.700 ↗