Microstructural Map and Phase Chemical Compositions in Hybrid Multi-component Cast Alloys Fe–W–Mo–V–Cr–Ti–(1.5–3.5 Wt Pct)B–(0.3–1.1 Wt Pct)C
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. S. Ma and J. Zhang: Rev. Adv. Mater. Sci., 2016, vol. 44, pp. 54–62.
2. Yu.G. Chabak, V.I. Zurnadzhy, M.A. Golinskyi, V.G. Efremenko, N.P. Zaichuk, I. Petryshynets, and S.P. Shymchuk: Prog. Phys. Met., 2022, vol. 23, pp. 583–612. https://doi.org/10.15407/ufm.23.04.583.10.15407/ufm.23.04.583 ↗
3. K.D. Lakeland, E. Graham, and A. Heron: Mechanical Properties and Microstructures of a Series of Fe-C-B Alloys, The University of Queensland, Brisbane, 1992, pp. 1–3.
4. I. Goldfarb, W.D. Kaplan, S. Ariely, and M. Bamberger: Philos. Mag. A, 1995, vol. 72, pp. 963–79. https://doi.org/10.1080/01418619508239947.10.1080/01418619508239947 ↗
5. Y. Chabak, V. Efremenko, M. Džupon, K. Shimizu, V. Fedun, K. Wu, B. Efremenko, I. Petryshynets, and T. Pastukhova: Materials, 2021, vol. 14, p. 3400. https://doi.org/10.1016/j.wear.2019.203021.10.1016/j.wear.2019.203021 ↗
6. Y. Jian, J. Xing, Z. Huang, and T. Wu: Wear, 2019, vol. 436–437, p. 203021. https://doi.org/10.1016/j.wear.2019.203021.10.1016/j.wear.2019.203021 ↗
7. Y. Yi, J. Xing, L. Yu, H. Fu, M. Wan, and Y. Lu: Tribol. Int., 2018, vol. 122, pp. 179–88. https://doi.org/10.1016/j.triboint.2018.02.031.10.1016/j.triboint.2018.02.031 ↗
8. G. Cui, Z. Yang, W. Wang, W.-J. Wang, and G.-J. Gao: J. Cent. South Univ., 2019, vol. 26, pp. 2643–50. https://doi.org/10.1007/s11771-019-4201-9.10.1007/s11771-019-4201-9 ↗
9. J. Zhang, J. Liu, H. Liao, M. Zeng, and S. Ma: J. Mater. Res. Technol., 2019, vol. 8, pp. 6308–20. https://doi.org/10.1016/j.jmrt.2019.09.004.10.1016/j.jmrt.2019.09.004 ↗
10. L. Feng and L. Zhenhua: Mater. Res. Express, 2020, vol. 7, 016551. https://doi.org/10.1088/2053-1591/ab65e9.10.1088/2053-1591/ab65e9 ↗
11. X. Ren, H. Fu, J. Xing, Y. Yang, and S. Tang: J. Mater. Res., 2017, vol. 32, pp. 3078–88. https://doi.org/10.1557/jmr.2017.304.10.1557/jmr.2017.304 ↗
12. O.V. Sukhova: Phys. Chem. Solid State, 2021, vol. 22, pp. 110–16. https://doi.org/10.15330/pcss.22.1.110-116.10.15330/pcss.22.1.110-116 ↗
13. Z. Huang, J. Xing, and C. Guo: Mater. Des., 2010, vol. 31, pp. 3084–89. https://doi.org/10.1016/j.matdes.2010.01.003.10.1016/j.matdes.2010.01.003 ↗
14. J. Lentz, A. Ruttger, F. Grozwendt, and W. Theisen: Mater. Des., 2018, vol. 156, pp. 113–24. https://doi.org/10.1016/j.matdes.2018.06.040.10.1016/j.matdes.2018.06.040 ↗
15. Z. Huang, J. Xing, and L. Lv: Mater. Charact., 2013, vol. 75, pp. 63–68. https://doi.org/10.1016/j.matchar.2012.09.007.10.1016/j.matchar.2012.09.007 ↗
16. X. Ren, L. Han, H. Fu, and J. Wang: Materials, 2021, vol. 14, p. 3709. https://doi.org/10.3390/ma14133709.10.3390/ma14133709 ↗
17. M. Frotscher, W. Klein, J. Bauer, C.-M. Fang, J.-F. Halet, A. Senyshyn, C. Baehtz, and B. Albert: ZAAC, 2007, vol. 633, pp. 2626–30. https://doi.org/10.1002/zaac.200700376.10.1002/zaac.200700376 ↗
18. S. Ma, J. Xing, S. Guo, Y. Bai, H. Fu, P. Lyu, Z. Huang, and W. Chen: Mater. Chem. Phys., 2017, vol. 199, pp. 356–69. https://doi.org/10.1016/j.matchemphys.2017.07.023.10.1016/j.matchemphys.2017.07.023 ↗
19. S.I. Ryabtsev, V.A. Polonskyy, and O.V. Sukhova: Mater. Sci., 2020, vol. 56, pp. 263–72. https://doi.org/10.1007/s11003-020-00428-8.10.1007/s11003-020-00428-8 ↗
20. Y. Jian, Z. Huang, J. Xing, and J. Li: Wear, 2017, vol. 378–379, pp. 165–73. https://doi.org/10.1016/j.wear.2017.02.042.10.1016/j.wear.2017.02.042 ↗
21. Y. Jian, Z. Huang, and J. Xing: Wear, 2016, vol. 362–363, pp. 68–77. https://doi.org/10.1016/j.wear.2016.04.029.10.1016/j.wear.2016.04.029 ↗
22. Y. Jian, Z. Huang, J. Xing, B. Zheng, L. Sun, and Y. Liu: Tribol. Int., 2016, vol. 101, pp. 331–39. https://doi.org/10.1016/j.triboint.2016.05.009.10.1016/j.triboint.2016.05.009 ↗
23. J. Zhang, Y. Gao, J. Xing, S. Ma, D. Yi, and J. Yan: Tribol. Lett., 2011, vol. 44, pp. 31–29. https://doi.org/10.1007/s11249-011-9823-5.10.1007/s11249-011-9823-5 ↗
24. A. Rottger, J. Lentz, and W. Theisen: Mater. Des., 2015, vol. 88, pp. 420–29. https://doi.org/10.1016/j.matdes.2015.08.157.10.1016/j.matdes.2015.08.157 ↗
25. X. Li, J. Hou, Y. Qu, and H. Fu: Mater. Werkst., 2015, vol. 46, pp. 1029–38. https://doi.org/10.1002/mawe.201500387.10.1002/mawe.201500387 ↗
26. W. Hartono, S. Aso, S. Goto, and Y. Komatsu: Int. J. Soc. Mater. Eng. Resour., 2002, vol. 10, pp. 99–105. https://doi.org/10.5188/ijsmer.10.99.10.5188/ijsmer.10.99 ↗
27. T.V. Loskutova, I.S. Pogrebova, V.G. Khyzhnyak, M.M. Bobina, and N.S. Nikitina: Mater. Today, 2019, vol. 6, pp. 202–11. https://doi.org/10.1016/j.matpr.2018.10.095.10.1016/j.matpr.2018.10.095 ↗
28. X. Ren, S. Tang, H. Fu, and J. Xing: Metals, 2021, vol. 11, p. 193. https://doi.org/10.3390/met11020193.10.3390/met11020193 ↗
29. Y. Liu, B. Li, J. Li, L. He, S. Gao, and T.G. Nieh: Mater. Lett., 2010, vol. 64, pp. 1299–301. https://doi.org/10.1016/j.matlet.2010.03.013.10.1016/j.matlet.2010.03.013 ↗
30. L. He, Y. Liu, J. Li, and B. Li: Mater. Des., 2012, vol. 36, pp. 88–93. https://doi.org/10.1016/j.matdes.2011.10.043.10.1016/j.matdes.2011.10.043 ↗
31. X. Shi, Y. Jiang, and R. Zhou: J. Iron. Steel Res. Int., 2016, vol. 23, pp. 1226–33. https://doi.org/10.1016/S1006-706X(16)30180-7.10.1016/S1006-706X(16)30180-7 ↗
32. V.G. Efremenko, K. Shimizu, A.P. Cheiliakh, T.V. Kozarevskaya, K. Kusumoto, and K. Yamamoto: Int. J. Miner. Metall. Mater., 2014, vol. 21(11), pp. 1096–108.10.1007/s12613-014-1014-6 ↗
33. S. Inthidech, J. Opapaibon, K. Yamamoto, and Y. Matsubara: ISIJ Int., 2021, vol. 11, pp. 2832–43. https://doi.org/10.2355/isijinternational.ISIJINT-2021-035.10.2355/isijinternational.ISIJINT-2021-035 ↗
34. V.G. Efremenko, Yu.G. Chabak, K. Shimizu, M.A. Golinskyi, A.G. Lekatou, I. Petryshynets, B.V. Efremenko, H. Halfa, K. Kusumoto, and V.I. Zurnadzhy: Mater. Charact., 2023, vol. 197, 112691. https://doi.org/10.1016/j.matchar.2023.112691.10.1016/j.matchar.2023.112691 ↗
35. H.-Q. Wu, M. Hashimoto, N. Sasaguri, and Y. Matsubara: J. Jpn. Foundry Eng. Soc., 1996, vol. 68, pp. 637–43.
36. M. Hashimoto, O. Kubo, and Y. Matsubara: ISIJ Int., 2004, vol. 44, pp. 372–80. https://doi.org/10.2355/isijinternational.44.372.10.2355/isijinternational.44.372 ↗
37. Yu.G. Chabak, K. Shimizu, V.G. Efremenko, M.A. Golinskyi, K. Kusumoto, V.I. Zurnadzhy, and A.V. Efremenko: Int. J. Miner. Metall. Mater., 2022, vol. 29, pp. 78–87. https://doi.org/10.1007/s12613-020-2135-8.10.1007/s12613-020-2135-8 ↗
38. Y. Chabak, I. Petryshynets, V. Efremenko, M. Golinskyi, K. Shimizu, V. Zurnadzhy, I. Sili, H. Halfa, B. Efremenko, and V. Puchy: Materials, 2023, vol. 16, p. 2530. https://doi.org/10.3390/ma16062530.10.3390/ma16062530 ↗
39. V.G. Efremenko, Yu.G. Chabak, V.I. Fedun, K. Shimizu, T.V. Pastukhova, I. Petryshynets, A.M. Zusin, E.V. Kudinova, and B.V. Efremenko: Vacuum, 2021, vol. 185, 110031. https://doi.org/10.1016/j.vacuum.2020.110031.10.1016/j.vacuum.2020.110031 ↗
40. A.M. Okoro, S.S. Lephuthing, and L. Rasiwela: Nondestructive measurement of the mechanical properties of graphene nanoplatelets reinforced nickel aluminium bronze composites. Heliyon, 2021, vol. 7, e07978. https://doi.org/10.1016/j.heliyon.2021.e07978.10.1016/j.heliyon.2021.e07978 ↗
41. A.I. Yurkova, A.V. Byakova, A.V. Belots’ky, Y.V. Milman, and S.N. Dub: Mater. Sci. Forum, 2006, vol. 503–504, pp. 645–50.10.4028/www.scientific.net/MSF.503-504.645 ↗
42. A. Lekatou and R.D. Walker: Ironmak. Steelmak., 1995, vol. 22, pp. 378–92.
43. A. Lekatou and R.D. Walker: Ironmak. Steelmak., 1995, vol. 22, pp. 393–404.
44. E. Georgatis, A. Lekatou, A.E. Karantzalis, H. Petropoulos, S. Katsamakis, and A. Poulia: J. Mater. Eng. Perform., 2013, vol. 22, pp. 729–41. https://doi.org/10.1007/s11665-012-0337-6.10.1007/s11665-012-0337-6 ↗
45. B.J. Kim, S.S. Jung, J.H. Hwang, Y.H. Park, and Y.C. Lee: Metalls, 2019, vol. 9, pp. 32–87. https://doi.org/10.3390/met9010032.10.3390/met9010032 ↗
46. A.E. Karantzalis, A. Lekatou, A. Kapoglou, H. Mavros, and V. Dracopoulos: J. Mater. Eng. Perform., 2012, vol. 21, pp. 1030–39. https://doi.org/10.1007/s11665-011-9995-z.10.1007/s11665-011-9995-z ↗
47. Z.-H. Guo, F.-R. Xiao, S.-L. Lu, H.-Y. Li, and B. Liao: Adv. Mater. Sci. Eng., 2016, https://doi.org/10.1155/2016/9807685.10.1155/2016/9807685 ↗
48. H. Yamagata: The Science and Technology of Materials in Automotive Engines, Woodhead Publishing, Cambridge, 2005, p. 318.10.1201/9780203024089 ↗
49. Y. Chabak, V. Efremenko, V. Zurnadzhy, V. Puchý, I. Petryshynets, B. Efremenko, V. Fedun, K. Shimizu, I. Bogomol, V. Kulyk, and D. Jakubéczyová: Metals, 2022, vol. 12, p. 218. https://doi.org/10.3390/met12020218.10.3390/met12020218 ↗
50. D.E. Newbury and N.W.M. Ritchie: J. Mater. Sci., 2015, vol. 50, pp. 493–518. https://doi.org/10.1007/s10853-014-8685-2.10.1007/s10853-014-8685-2 ↗
51. H. Fredriksson and U. Åkerlind: Solidification and Crystallization Processing in Metals and Alloys, Whiley, Chichester, 2012, p. 832.10.1002/9781119975540 ↗
52. V. Lazić, D. Milosavljevic, S. Aleksandrović, P. Marinković, G. Bogdanovic, and B. Nedeljković: Tribol. Ind., 2010, vol. 32, pp. 11–20.
53. V.G. Efremenko, K.M. Wu, K. Shimizu, I. Petryshynets, B.V. Efremenko, H. Halfa, Yu.G. Chabak, A.A. Malyshevskyi, and V.I. Zurnadzhy: Prakt. Metallogr., 2020, vol. 57, pp. 714–42. https://doi.org/10.3139/147.110683.10.3139/147.110683 ↗
54. M. Filipovic, E. Romhanji, and Z. Kamberovic: ISIJ Int., 2012, vol. 52, pp. 2200–204. https://doi.org/10.2355/isijinternational.52.2200.10.2355/isijinternational.52.2200 ↗
55. B.V. Efremenko, K. Shimizu, N. Espallargas, V.G. Efremenko, K. Kusumoto, Yu.G. Chabak, A.G. Belik, V.V. Chigarev, and V.I. Zurnadzhy: Wear, 2020, vol. 460–461, p. 203439. https://doi.org/10.1016/j.wear.2020.203439.10.1016/j.wear.2020.203439 ↗
56. S. Imurai, C. Thanachayanont, J.T.H. Pearce, K. Tsuda, and T. Chairuangsri: Mater. Charact., 2014, vol. 90, pp. 99–112. https://doi.org/10.1016/j.matchar.2014.01.014.10.1016/j.matchar.2014.01.014 ↗
57. C.P. Tabrett, I.R. Sare, and M.R. Ghomashchi: Int. Mater. Rev., 1996, vol. 41, pp. 59–82. https://doi.org/10.1179/imr.1996.41.2.59.10.1179/imr.1996.41.2.59 ↗
58. G. Laird, R. Gundlach, and K. Rohrig: Abrasion-Resistant Cast Iron Handbook, American Foundry Society, Des Plaines, 2000, p. 222.
59. A.E. Karantzalis, A. Lekatou, and E. Diavati: J. Mater. Eng. Perform., 2009, vol. 18, pp. 1078–85. https://doi.org/10.1007/s11665-009-9353-6.10.1007/s11665-009-9353-6 ↗
60. M.O. Vasylyev, B.M. Mordyuk, S.I. Sydorenko, S.M. Voloshko, A.P. Burmak, and N.V. Franchik: Metallofiz. Noveishie Tekhnol., 2017, vol. 39, pp. 905–28.10.15407/mfint.39.07.0905 ↗
61. A. Stelmakh, R. Kostunik, V. Radzievskyi, S. Shymchuk, and N. Zaichuk: Advances in Design, Simulation and Manufacturing. DSMIE 2022. Lecture Notes in Mechanical Engineering, 2022, vol. V, pp. 504–18. https://doi.org/10.1007/978-3-031-06025-0_5010.1007/978-3-031-06025-0_50 ↗
62. V. Efremenko, K. Shimizu, T. Pastukhova, Yu. Chabak, M. Brykov, K. Kusumoto, and A. Efremenko: Int. J. Mater. Res., 2018, vol. 109, pp. 147–56. https://doi.org/10.3139/146.111583.10.3139/146.111583 ↗
63. Y.L. Ivanytskyj, T.M. Lenkovskiy, Y.V. Molkov, V.V. Kulyk, and Z.A. Duriagina: Arch. Mater. Sci. Eng., 2016, vol. 82, pp. 49–56. https://doi.org/10.5604/01.3001.0009.7103.10.5604/01.3001.0009.7103 ↗