New Route to Synthesize High-Entropy Carbide Powders by Mechanical Alloying
Source abstract
Abstract
Abstract A new route for the synthesis of the (NbTa)$$0.67$$(TiHfZr)$$0.33$$C and (NbTa)$$0.67$$(MoHfW)$$0.33$$C high-entropy carbides powders by mechanical alloying is presented. Namely, pure metal powders were wet-milled in toluene using a planetary mill under an argon atmosphere. The synthesized materials crystallize with a rock-salt structure (space group $$Fm{\bar{3}}m$$). A significant reduction in structural defects with annealing of the samples was detected with X-ray diffraction and positron annihilation experiments. Simultaneously, only simple metallic properties without any trace of magnetic or superconducting phase transitions were observed.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Y. Wang: Adv. Appl. Ceram., 2022, vol. 121(2), pp. 57–78. https://doi.org/10.1080/17436753.2021.2014277.10.1080/17436753.2021.2014277 ↗
2. P. Sarker, T. Harrington, C. Toher, C. Oses, M. Samiee, J.-P. Maria, D. Brenner, K. Vecchio, and S. Curtarolo: Nat. Commun., 2018, vol. 9, p. 4980. https://doi.org/10.1038/s41467-018-07160-7.10.1038/s41467-018-07160-7 ↗
3. E. Castle, T. Csanádi, S. Grasso, J. Dusza, and M. Reece: Sci. Rep., 2018, vol. 8, p. 8609. https://doi.org/10.1038/s41598-018-26827-1.10.1038/s41598-018-26827-1 ↗
4. C. Peng, X. Gao, M. Wang, L. Wu, H. Tang, X. Li, Q. Hang, Y. Ren, F. Zhang, Y. Wang, B. Zhang, B. Gao, Q. Zou, Y. Zhao, Q. Yang, D. Tian, H. Xiao, H. Gou, W. Yang, X. Bai, W.L. Mao, and H.-K. Mao: Appl. Phys. Lett., 2019, vol. 114(1), p. 011905. https://doi.org/10.1063/1.5054954.10.1063/1.5054954 ↗
5. Y. Wang, T. Csanádi, H. Zhang, J. Dusza, M.J. Reece, and R.-Z. Zhang: Adv. Theory Simul., 2020, vol. 3(9), p. 2000111. https://doi.org/10.1002/adts.202000111.10.1002/adts.202000111 ↗
6. T.J. Harrington, J. Gild, P. Sarker, C. Toher, C.M. Rost, O.F. Dippo, C. McElfresh, K. Kaufmann, E. Marin, L. Borowski, P.E. Hopkins, J. Luo, S. Curtarolo, D.W. Brenner, and K.S. Vecchio: Acta Mater., 2019, vol. 166, pp. 271–80. https://doi.org/10.1016/j.actamat.2018.12.054.10.1016/j.actamat.2018.12.054 ↗
7. J. Dusza, T. Csanádi, D. Medved, R. Sedlák, M. Vojtko, M. Ivor, H. Ünsal, P. Tatarko, M. Tatarková, and P. Šajgalík: J. Eur. Ceram. Soc., 2021, vol. 41(11), pp. 5417–26. https://doi.org/10.1016/j.jeurceramsoc.2021.05.002.10.1016/j.jeurceramsoc.2021.05.002 ↗
8. B. Ye, T. Wen, K. Huang, C. Wang, and Y. Chu: J. Am. Ceram. Soc., 2018, vol. 102, p. 16295. https://doi.org/10.1111/jace.16295.10.1111/jace.16295 ↗
9. L. Feng, W.G. Fahrenholtz, and G.E. Hilmas: J. Am. Ceram. Soc., 2019, vol. 102(12), pp. 7217–24. https://doi.org/10.1111/jace.16672.10.1111/jace.16672 ↗
10. K. Wang, L. Chen, C. Xu, W. Zhang, Z. Liu, Y. Wang, J. Ouyang, X. Zhang, Y. Fu, and Y. Zhou: J. Mater. Sci. Technol., 2020, vol. 39, pp. 99–105. https://doi.org/10.1016/j.jmst.2019.07.056.10.1016/j.jmst.2019.07.056 ↗
11. E. Chicardi, C. García-Garrido, and F.J. Gotor: Ceram. Int., 2019, vol. 45(17), pp. 21858–63. https://doi.org/10.1016/j.ceramint.2019.07.195.10.1016/j.ceramint.2019.07.195 ↗
12. E. Chicardi, C. García-Garrido, J. Hernández-Saz, and F.J. Gotor: Ceram. Int., 2020, vol. 46(13), pp. 21421–30. https://doi.org/10.1016/j.ceramint.2020.05.240.10.1016/j.ceramint.2020.05.240 ↗
13. D.O. Moskovskikh, S. Vorotilo, A.S. Sedegov, K.V. Kuskov, K.V. Bardasova, P.V. Kiryukhantsev-korneev, M. Zhukovskyi, and A.S. Mukasyan: Ceram. Int., 2020, vol. 46(11), pp. 19008–14. https://doi.org/10.1016/j.ceramint.2020.04.230.10.1016/j.ceramint.2020.04.230 ↗
14. S. Ning, T. Wen, B. Ye, and Y. Chu: J. Am. Ceram. Soc., 2020, vol. 103(3), pp. 2244–51. https://doi.org/10.1111/jace.16896}.10.1111/jace.16896} ↗
15. C. Suryanarayana: Mater. Res. Lett., 2022, vol. 10(10), pp. 619–47. https://doi.org/10.1080/21663831.2022.2075243.10.1080/21663831.2022.2075243 ↗
16. J. Rodríguez-Carvajal: Physica B, 1993, vol. 192(1), pp. 55–69. https://doi.org/10.1016/0921-4526(93)90108-I.10.1016/0921-4526(93)90108-I ↗
17. G.K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1(1), pp. 22–31. https://doi.org/10.1016/0001-6160(53)90006-6.10.1016/0001-6160(53)90006-6 ↗
18. J. Kansy: Nucl. Instrum. Methods Phys. Res. Sect. A, 1996, vol. 374(2), pp. 235–44. https://doi.org/10.1016/0168-9002(96)00075-7.10.1016/0168-9002(96)00075-7 ↗
19. K. Nakamura and M. Yashima: Mater. Sci. Eng. B, 2008, vol. 148(1), pp. 69–72. https://doi.org/10.1016/j.mseb.2007.09.040.10.1016/j.mseb.2007.09.040 ↗
20. A.S. Kurlov and A.I. Gusev: Inorg. Mater., 2006, vol. 42(2), pp. 121–27. https://doi.org/10.1134/S0020168506020051.10.1134/S0020168506020051 ↗
21. H. Okamoto: J. Phase Equilib. Diffus., 2008, vol. 29(6), pp. 543–44. https://doi.org/10.1007/s11669-008-9396-7.10.1007/s11669-008-9396-7 ↗
22. L. Feng, W.G. Fahrenholtz, G.E. Hilmas, and Y. Zhou: Scripta Mater., 2019, vol. 162, pp. 90–93. https://doi.org/10.1016/j.scriptamat.2018.10.049.10.1016/j.scriptamat.2018.10.049 ↗
23. C.M. Rost, E. Sachet, T. Borman, A. Moballegh, E.C. Dickey, D. Hou, J.L. Jones, S. Curtarolo, and J.-P. Maria: Nat. Commun., 2015, vol. 6(1), p. 8485. https://doi.org/10.1038/ncomms9485.10.1038/ncomms9485 ↗
24. J.R.D.S. Politi, F. Vines, J.A. Rodriguez, and F. Illas: Phys. Chem. Chem. Phys., 2013, vol. 15, pp. 12617–25. https://doi.org/10.1039/C3CP51389K.10.1039/C3CP51389K ↗
25. V.G. Zavodinsky: Int. J. Refract. Met. Hard Mater., 2010, vol. 28(3), pp. 446–50. https://doi.org/10.1016/j.ijrmhm.2010.02.003.10.1016/j.ijrmhm.2010.02.003 ↗
26. B.H. Toby: Powder Diffr., 2006, vol. 21(1), pp. 67–70. https://doi.org/10.1154/1.2179804.10.1154/1.2179804 ↗
27. R. Idczak, W. Nowak, M. Babij, and V.H. Tran: Physica C, 2021, vol. 590, p. 1353945. https://doi.org/10.1016/j.physc.2021.1353945.10.1016/j.physc.2021.1353945 ↗
28. R.M. Nieminen, and M.J. Manninen, in: Positrons in Imperfect Solids: Theory, P. Hautojärvi, (ed.), Springer, Berlin, pp. 145–95, 1979. https://doi.org/10.1007/978-3-642-81316-0_410.1007/978-3-642-81316-0_4 ↗
29. A.A. Rempel, A.A. Valeeva, A.S. Kurlov, G. Klinser, and W. Sprengel: Mendeleev Commun., 2019, vol. 29(5), pp. 486–88. https://doi.org/10.1016/j.mencom.2019.09.002.10.1016/j.mencom.2019.09.002 ↗
30. M.J. Puska, M. Sob, G. Brauer, and T. Korhonen: J. Phys. IV France, 1995, vol. 05, pp. 1–351142. https://doi.org/10.1051/jp4:1995115.10.1051/jp4:1995115 ↗
31. J.M.C. Robles, E. Ogando, and F. Plazaola: J. Phys., 2007, vol. 19(17), 176222https://doi.org/10.1088/0953-8984/19/17/176222.10.1088/0953-8984/19/17/176222 ↗
32. J.-G. Choi: Appl. Catal. A, 1999, vol. 184(2), pp. 189–201. https://doi.org/10.1016/S0926-860X(99)00109-X.10.1016/S0926-860X(99)00109-X ↗
33. M. Jalaly, F.J. Gotor, and M.J. Sayagués: Int. J. Refract. Met. Hard Mater., 2019, vol. 79, pp. 177–84. https://doi.org/10.1016/j.ijrmhm.2018.12.011.10.1016/j.ijrmhm.2018.12.011 ↗
34. A. Vladescu, I. Titorencu, Y. Dekhtyar, V. Jinga, V. Pruna, M. Balaceanu, M. Dinu, I. Pana, V. Vendina, and M. Braic: PLoS ONE, 2016, vol. 11(8), pp. 1–18. https://doi.org/10.1371/journal.pone.0161151.10.1371/journal.pone.0161151 ↗
35. K. Kowalski: In situ xps investigation of the baking effect on the surface oxide structure formed on niobium sheets used for superconducting rf cavity production. in Proc. of the 11th Workshop on RF Superconductivity, Travemünde, Germany, 2003
36. C. Wan, Y.N. Regmi, and B.M. Leonard: Angew. Chem. Int. Ed., 2014, vol. 53(25), pp. 6407–10. https://doi.org/10.1002/anie.201402998.10.1002/anie.201402998 ↗
37. S. Li, Y. Zhang, Y. Han, F. Lv, B. Liu, and L. Huo: Appl. Surf. Sci., 2022, vol. 600, 154134https://doi.org/10.1016/j.apsusc.2022.154134.10.1016/j.apsusc.2022.154134 ↗
38. P.V. Krasovskii, O.S. Malinovskaya, A.V. Samokhin, Y.V. Blagoveshchenskiy, V.A. Kazakov, and A.A. Ashmarin: Appl. Surf. Sci., 2015, vol. 339, pp. 46–54. https://doi.org/10.1016/j.apsusc.2015.02.152.10.1016/j.apsusc.2015.02.152 ↗
39. C. Lopes, N.M.G. Parreira, S. Carvalho, A. Cavaleiro, J.P. Riviére, E. Le Bourhis, and F. Vaz: Surf. Coat. Technol., 2007, vol. 201(16), pp. 7180–86. https://doi.org/10.1016/j.surfcoat.2007.01.025.10.1016/j.surfcoat.2007.01.025 ↗
40. E.T. Turkdogan: Physical Chemistry of High Temperature Technology, Academic Press, New York, 1980.
41. H. Lun, Y. Zeng, X. Xiong, Z. Ye, Z. Zhang, X. Li, H. Chen, and Y. Liu: J. Adv. Ceram., 2021, vol. 10(4), pp. 741–57. https://doi.org/10.1007/s40145-021-0469-y.10.1007/s40145-021-0469-y ↗
42. L.B. Dubrovskaya and S.Z. Nazarova: Phys. Status Solidi A, 1984, vol. 83(1), pp. 11–38. https://doi.org/10.1002/pssa.2210830102.10.1002/pssa.2210830102 ↗
43. H. Bittner and H. Goretzki: Monatshefte für Chemie und verwandte Teile anderer Wissenschaften, 1962, vol. 93(5), pp. 1000–04. https://doi.org/10.1007/BF00905899.10.1007/BF00905899 ↗
44. L. Toth: Transition Metal Carbides and Nitrides, Elsevier Science, Amsterdam, 2014.
45. A.I. Gusev, A.A. Rempel, and V.N. Lipatnikov: Magnetic susceptibility and atomic ordering in tantalum carbide. Phys. Status Solidi A, 1988, vol. 106(2), pp. 459–66. https://doi.org/10.1002/pssa.2211060216.10.1002/pssa.2211060216 ↗
46. G. Subhashree, S. Sankar, and R. Krithiga: Zeitschrift für Naturforschung A, 2015, vol. 70(9), pp. 721–28. https://doi.org/10.1515/zna-2015-0126.10.1515/zna-2015-0126 ↗
47. N.J. Szymanski, I. Khatri, J.G. Amar, D. Gall, and S.V. Khare: J. Mater. Chem. C, 2019, vol. 7, pp. 12619–32. https://doi.org/10.1039/C9TC03793D.10.1039/C9TC03793D ↗
48. R.H. Willens and E. Buehler: Appl. Phys. Lett., 1965, vol. 7(1), pp. 25–26. https://doi.org/10.1063/1.1754239.10.1063/1.1754239 ↗
49. P.B. Allen and M.L. Cohen: Phys. Rev. Lett., 1972, vol. 29, pp. 1593–96. https://doi.org/10.1103/PhysRevLett.29.1593.10.1103/PhysRevLett.29.1593 ↗
50. P. Koželj, S. Vrtnik, A. Jelen, S. Jazbec, Z. Jagličić, S. Maiti, M. Feuerbacher, W. Steurer, and J. Dolinšek: Phys. Rev. Lett., 2014, vol. 113, 107001https://doi.org/10.1103/PhysRevLett.113.107001.10.1103/PhysRevLett.113.107001 ↗
51. P. Sobota, R. Topolnicki, T. Ossowski, T. Pikula, A. Pikul, and R. Idczak: Phys. Rev. B, 2022, vol. 106, 184512https://doi.org/10.1103/PhysRevB.106.184512.10.1103/PhysRevB.106.184512 ↗
52. R.-Z. Zhang and M.J. Reece: J. Mater. Chem. A, 2019, vol. 7, pp. 22148–62. https://doi.org/10.1039/C9TA05698J.10.1039/C9TA05698J ↗
53. Q. Zhu, G. Xiao, Y. Cui, W. Yang, S. Wu, G.-H. Cao, and Z. Ren: Scripta Mater., 2022, vol. 210, 114464https://doi.org/10.1016/j.scriptamat.2021.114464.10.1016/j.scriptamat.2021.114464 ↗
54. Q. Zhu, G. Xiao, Y. Cui, W. Yang, S. Song, G.-H. Cao, and Z. Ren: J. Alloy Compd., 2022, vol. 909, 164700https://doi.org/10.1016/j.jallcom.2022.164700.10.1016/j.jallcom.2022.164700 ↗
55. L.B. Mendelsohn, F. Biggs, and J.B. Mann: Phys. Rev. A, 1970, vol. 2, pp. 1130–34. https://doi.org/10.1103/PhysRevA.2.1130.10.1103/PhysRevA.2.1130 ↗
56. D.J. Safarik, R.B. Schwarz, and M.F. Hundley: Phys. Rev. Lett., 2006, vol. 96, 195902https://doi.org/10.1103/PhysRevLett.96.195902.10.1103/PhysRevLett.96.195902 ↗
57. C.A. Martin: J. Phys., 1991, vol. 3(32), p. 5967. https://doi.org/10.1088/0953-8984/3/32/005.10.1088/0953-8984/3/32/005 ↗
58. E.S.R. Gopal: Specific Heats at Low Temperatures, Plenum Press, New York, 1966. https://doi.org/10.1007/978-1-4684-9081-7.10.1007/978-1-4684-9081-7 ↗
59. F.I. Ajami and R.K. MacCrone: J. Less Common Met., 1974, vol. 38(2), pp. 101–10. https://doi.org/10.1016/0022-5088(74)90053-8.10.1016/0022-5088(74)90053-8 ↗
60. X.-G. Lu, M. Selleby, and B. Sundman: Acta Mater., 2007, vol. 55(4), pp. 1215–26. https://doi.org/10.1016/j.actamat.2006.05.054.10.1016/j.actamat.2006.05.054 ↗
61. Y. Liu, Y. Jiang, R. Zhou, and J. Feng: J. Alloy Compd., 2014, vol. 582, pp. 500–04. https://doi.org/10.1016/j.jallcom.2013.08.045.10.1016/j.jallcom.2013.08.045 ↗