Residual Stress Distributions in Dissimilar Titanium Alloy Diffusion Bonds Produced From Powder Using Field-Assisted Sintering Technology (FAST-DB)
Source abstract
Abstract
Abstract The conventional approach when engineering components manufactured from titanium is to design the thermomechanical processing to develop an optimal microstructure in a single alloy. However, this conventional approach can lead to unnecessary over-engineering of components, particularly when only a specific subcomponent region is under demanding service stresses and environments. One approach being developed to join multiple alloys in a single component and enhance engineering performance and efficiency is FAST-DB—whereby multiple alloys in powder form are diffusion bonded (DB) using field-assisted sintering technology (FAST). But the joining of multiple alloys using conventional welding and joining techniques can generate high residual stress in the bond region that can affect the mechanical performance of the components. In this study, the residual stress distribution across dissimilar titanium alloy diffusion bonds, processed from powder using FAST, were measured using X-Ray diffraction and the Contour method. The measurements show low residual stress in the bulk material processed with FAST as well as in the diffusion bond region. In addition, FAST-DB preforms subsequently hot forged into different near-net shapes were also analyzed to understand how the residual stress in the bond region is affected by a subsequent processing. Overall, no sharp transitions in residual stress was observed between the dissimilar alloys. This study reinforces confidence in the solid-state FAST process for manufacturing next generation components from multiple titanium alloy powders.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. V.A. Joshi: Titanium Alloys: An Atlas of Structures and Fracture Features, Taylor & Francis, New York, USA, 2006.
2. A.P. Mouritz: Introduction to Aerospace Materials, Woodhead Publishing, Cambridge, England, 2012.10.2514/4.869198 ↗
3. G. Lutjering and C.W. James: Titanium, 2nd ed. Springer, Berlin, Germany, 2007.
4. C. Leyens and M. Peters: Titanium and Titanium Alloys: Fundamentals and Applications, vol. 1, Wiley-VCH, Weinheim, Germany, 2003.10.1002/3527602119 ↗
5. G. Çam, G. Ipekoǧlu, K.H. Bohm, and M. Koçak: J. Mater. Sci., 2006, vol. 41, pp. 5273–282.10.1007/s10853-006-0292-4 ↗
6. G. Çam, U. Özdemir, V. Ventzke, and M. Koçak: J. Mater. Sci., 2008, vol. 43, pp. 3491–499.10.1007/s10853-007-2403-2 ↗
7. D. Herrmann and F. Appel: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2009, vol. 40, pp. 1881–902.10.1007/s11661-009-9878-1 ↗
8. X.R. Wang, Y.Q. Yang, X. Luo, W. Zhang, G.M. Zhao, and B. Huang: Intermetallics, 2013, vol. 36, pp. 127–32.10.1016/j.intermet.2012.12.018 ↗
9. X.F. Wang, M. Ma, X. Bin Liu, X.Q. Wu, C.G. Tan, R.K. Shi, and J.G. Lin: Trans. Nonferrous Met. Soc. China, 2006, vol. 16, pp. 1059–63.10.1016/S1003-6326(06)60377-4 ↗
10. M. Holmquist, V. Recina, and B. Pettersson: Acta Mater., 1999, vol. 47, pp. 1791–799.10.1016/S1359-6454(99)00051-8 ↗
11. M. Holmquist, V. Recina, J. Ockborn, B. Pettersson, and E. Zumalde: Scr. Mater., 1998, vol. 39, pp. 1101–106.10.1016/S1359-6462(98)00274-7 ↗
12. D. He, Z. Fu, W. Wang, J. Zhang, Z.A. Munir, and P. Liu: Mater. Sci. Eng. A, 2012, vol. 535, pp. 182–88.10.1016/j.msea.2011.12.061 ↗
13. J. Pope and M. Jackson: Metals (Basel), 2019, vol. 9, p. 654.10.3390/met9060654 ↗
14. J.J. Pope, E.L. Calvert, N.S. Weston, and M. Jackson: J. Mater. Process. Technol., 2019, vol. 269, pp. 200–07.10.1016/j.jmatprotec.2019.02.011 ↗
15. T. Nakamura, K. Hayakawa, S. Tanaka, H. Imaizumi, and Y. Nakagawa: Mater. Trans., 2005, vol. 46, pp. 292–97.10.2320/matertrans.46.292 ↗
16. N.S. Weston and M. Jackson: J. Mater. Process. Technol., 2017, vol. 243, pp. 335–46.10.1016/j.jmatprotec.2016.12.013 ↗
17. O. Levano Blanch, D. Lunt, G.J. Baxter, and M. Jackson: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2021, vol. 52, pp. 3064–82.10.1007/s11661-021-06301-w ↗
18. O. Levano, N. Weston, J. Pope, A. Tudball, D. Lunn, G. Baxter, and M. Jackson: MATEC Web Conf., 2020, vol. 321, p. 03010.10.1051/matecconf/202032103010 ↗
19. S.J. Tuppen, M.R. Bache, and W.E. Voice: Int. J. Fatigue, 2005, vol. 27, pp. 651–58.10.1016/j.ijfatigue.2004.11.004 ↗
20. P.J. Withers and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, pp. 366–75.10.1179/026708301101510087 ↗
21. G.E. Dieter: Mechanical Metallurgy, 3rd ed. McGraw-Hill Education, New York, 1989.
22. W. Elber: Fracture Toughness and Slow-Stagle Cracking, 1st ed. ASTM, Philadelphia, 1973.
23. J.D. Almer, J.B. Cohen, and B. Moran: Mater. Sci. Eng. A, 2000, vol. 284, pp. 268–79.10.1016/S0921-5093(99)00779-0 ↗
24. D. Busse: Cranfield University, 2017.
25. G.S. Schajer: Practical Residual Stress Measurement Methods, 1st ed. Wiley, West Sussex, UK, 2013.10.1002/9781118402832 ↗
26. J.Z. Zhou, S. Huang, L.D. Zuo, X.K. Meng, J. Sheng, Q. Tian, Y.H. Han, and W.L. Zhu: Opt. Lasers Eng., 2014, vol. 52, pp. 189–94.10.1016/j.optlaseng.2013.06.011 ↗
27. E.J. Fairfax and M. Steinzig: in Conference Proceedings of the Society for Experimental Mechanics Series, Springer International Publishing, New York, USA, 2016, pp. 209–14.10.1007/978-3-319-21765-9_26 ↗
28. W. Rae, Z. Lomas, M. Jackson, and S. Rahimi: Mater. Charact., 2017, vol. 132, pp. 10–9.10.1016/j.matchar.2017.07.042 ↗
29. F. Hosseinzadeh, P. Ledgard, and P.J. Bouchard: Exp. Mech., 2013, vol. 53, pp. 829–39.10.1007/s11340-012-9686-1 ↗
30. P. Xie, H. Zhao, B. Wu, and S. Gong: Exp. Mech., 2015, vol. 55, pp. 1329–37.10.1007/s11340-015-0040-2 ↗
31. A.R. McAndrew, P.A. Colegrove, C. Bühr, B.C.D. Flipo, and A. Vairis: Prog. Mater. Sci., 2018, vol. 92, pp. 225–57.10.1016/j.pmatsci.2017.10.003 ↗
32. P. Xie, H. Zhao, and Y. Liu: Sci. Technol. Weld. Join., 2016, vol. 21, pp. 351–57.10.1080/13621718.2015.1115158 ↗
33. R. Bandyopadhyay, J. Rotella, D. Naragani, J.S. Park, M. Eff, and M.D. Sangid: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 704–18.10.1007/s11661-018-5034-0 ↗
34. W.B. Li and K.E. Easterling: Powder Metall., 1992, vol. 35, pp. 47–52.10.1179/pom.1992.35.1.47 ↗
35. Y.A. Bahei-El-Din and G.J. Dvorak: Acta Metall. Mater., 1995, vol. 43, pp. 2531–39.10.1016/0956-7151(94)00477-Y ↗
36. R.B. Parker, D.W. Brown, and P. Rangaswamy: Mater. Sci. Forum, 2000, vol. 347, pp. 229–34.10.4028/www.scientific.net/MSF.347-349.229 ↗
37. P. Angerer, W. Artner, E. Neubauer, L.G. Yu, and K.A. Khor: Int. J. Refract. Met. Hard Mater., 2008, vol. 26, pp. 312–17.10.1016/j.ijrmhm.2007.08.002 ↗
38. P. Angerer, J. Wosik, E. Neubauer, L.G. Yu, G.E. Nauer, and K.A. Khor: Int. J. Refract. Met. Hard. Mater., 2009, vol. 27, pp. 105–10.10.1016/j.ijrmhm.2008.04.002 ↗
39. T. Childerhouse, R. M’Saoubi, L. Franca, N. Weston, P. Crawforth, and M. Jackson: Int. J. Fatigue, 2022, vol. 163, p. 107054.10.1016/j.ijfatigue.2022.107054 ↗
40. M. Szutkowska, J. Cyboroń, M. Podsiadło, and T. Polczyk: Ceram. Int., 2022, vol. 48, pp. 17116–22.10.1016/j.ceramint.2022.02.267 ↗
41. T. Yu, H. Kwon, L. Shi, X. Zhou, D.H. Yoon, P. Tatarko, X. Xu, Z. Huang, and Q. Huang: J. Eur. Ceram. Soc., 2021, vol. 41, pp. 1834–40.10.1016/j.jeurceramsoc.2020.10.059 ↗
42. N. Tamanna, I.R. Kabir, and S. Naher: Therm. Sci. Eng. Prog., 2022, vol. 31, p. 101283.10.1016/j.tsep.2022.101283 ↗
43. O. Guillon, J. Gonzalez-Julian, B. Dargatz, T. Kessel, G. Schierning, J. Räthel, and M. Herrmann: Adv. Eng. Mater., 2014, vol. 16, pp. 830–49.10.1002/adem.201300409 ↗
44. M. Suárez, A. Fernández, J.L. Menéndez, R. Torrecillas, H.U. Kessel, J. Hennicke, R. Kirchner, and T. Kessel: Sinter. Appl., 2013, vol. 13, pp. 319–42.
45. M.E. Fitzpatrick, A. Fry, P. Holdway, F. a Kandil, J. Shackleton, and L. Suominen: Measurement Good Practice Guide No. 52. Determination of Residual Stresses by X-Ray Diffraction, 2005.
46. M.B. Prime and A. Gonzales: in Sixth International Conference on Residual Stresses, Los Alamos National Laboratory, 2000, pp. 617–24.
47. J.D. Pollard, S. Rahimi, A. Watford, M. Jackson, and B.P. Wynne: in Proceedings of the 13th World Conference on Titanium, John Wiley & Sons, Inc., Hoboken, New Jersey, USA, 2016, pp. 305–10.10.1002/9781119296126.ch46 ↗
48. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671–75.10.1038/nmeth.2089 ↗
49. P. Manda, R.M. Samudrala, M.K. Mohan, and A.K. Singh: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 4539–52.10.1007/s11661-017-4217-4 ↗
50. N.G. Jones, R.J. Dashwood, M. Jackson, and D. Dye: Acta Mater., 2009, vol. 57, pp. 3830–9.10.1016/j.actamat.2009.04.031 ↗
51. Y. Zheng, R.E.A. Williams, G.B. Viswanathan, W.A.T. Clark, and H.L. Fraser: Acta Mater., 2018, vol. 150, pp. 25–39.10.1016/j.actamat.2018.03.003 ↗
52. P. Manda, V. Singh, U. Chakkingal, and A.K. Singh: Mater. Charact., 2016, vol. 120, pp. 220–8.10.1016/j.matchar.2016.09.005 ↗
53. S. Nosewicz, J. Rojek, and M. Chmielewski: Materials (Basel), 2020, vol. 13, pp. 1–21.10.3390/ma13184015 ↗
54. M. Petrus and J. Wo: Materials (Basel), 2022, vol. 15, p. 1175.10.3390/ma15031175 ↗
55. B. Kedia, I. Balasundar, and T. Raghu: Trans. Indian Inst. Met., 2018, vol. 71, pp. 1791–801.10.1007/s12666-018-1323-y ↗