Size Effect on the Tensile Mechanical Behavior of Thin Ti6242S Specimens at 723 K and 823 K
Source abstract
Abstract
The mechanical behavior of titanium-based alloy Ti6242S was investigated under uniaxial tensile loading at 723 K (450 °C) and 823 K (550 °C) under air and argon environments. Microtensile specimens ranging from 1 mm to 100 µm in thickness were tested to investigate the influence of the decrease in thickness on mechanical properties. Fractographic analyses were carried out using scanning electron microscopy. At 450 °C and 550 °C, a decrease in yield strength, ultimate tensile strength, and strain-to-failure with decreasing thickness was observed. These drops in the macroscopic tensile properties of the thinnest specimens result from a combination of oxidation, which further impairs the specimens with a high surface-to-volume ratio, and the overall lower number of colonies of α lamellae contained in thinner specimens. Ti6242S exhibited dynamic strain aging at 450 °C, especially in specimens with thickness below 500 µm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. A. Casadebaigt, J. Hugues, and D. Monceau: Corros. Sci., 2020, vol. 175, p. 108875.10.1016/j.corsci.2020.108875 ↗
2. A.W. Thompson: Scr. Metall., 1974, vol. 8, pp. 145–47.10.1016/0036-9748(74)90461-X ↗
3. S. Miyazaki, K. Shibata, and H. Fujita: Acta Metall., 1979, vol. 27, pp. 855–62.10.1016/0001-6160(79)90120-2 ↗
4. C. Keller and E. Hug: Mater. Lett., 2008, vol. 62, pp. 1718–20.10.1016/j.matlet.2007.09.069 ↗
5. C. Keller, E. Hug, R. Retoux, and X. Feaugas: Mech. Mater., 2010, vol. 42, pp. 44–54.10.1016/j.mechmat.2009.09.002 ↗
6. C. Keller, E. Hug, and X. Feaugas: Int. J. Plast., 2011, vol. 27, pp. 635–54.10.1016/j.ijplas.2010.08.002 ↗
7. M. Doner and J.A. Heckler: Superalloys, 1988, vol. 1988, pp. 653–62.
8. M.G.D. Geers, W.A.M. Brekelmans, and P.J.M. Janssen: Int. J. Solids Struct., 2006, vol. 43, pp. 7304–21.10.1016/j.ijsolstr.2006.05.009 ↗
9. E. Hug, C. Keller, P.A. Dubos, and M.M. Celis: J. Mater. Res. Technol., 2021, vol. 11, pp. 1362–77.10.1016/j.jmrt.2021.01.105 ↗
10. C. Romain, D. Texier, C. Desgranges, J. Cormier, S. Knittel, D. Monceau, and D. Delagnes: Oxid. Met., 2021, vol. 96, pp. 169–82.10.1007/s11085-021-10075-2 ↗
11. J.T. Fourie: Philos. Mag., 1968, vol. 17, pp. 735–56.10.1080/14786436808223026 ↗
12. H. Mughrabi: Phys. Status Solidi, 1971, vol. 44, pp. 391–402.10.1002/pssb.2220440140 ↗
13. M.D. Uchic and D.M. Dimiduk: Mater. Sci. Eng. A, 2005, vol. 400–401, pp. 268–78.10.1016/j.msea.2005.03.082 ↗
14. J.R. Greer, W.C. Oliver, and W.D. Nix: Acta Mater., 2005, vol. 53, pp. 1821–830.10.1016/j.actamat.2004.12.031 ↗
15. C.A. Volkert and E.T. Lilleodden: Philos. Mag., 2006, vol. 86, pp. 5567–579.10.1080/14786430600567739 ↗
16. J.R. Greer and W.D. Nix: Appl. Phys. A, 2005, vol. 80, pp. 1625–629.10.1007/s00339-005-3204-6 ↗
17. W.D. Nix: Metall. Trans. A, 1989, vol. 20, pp. 391–420.10.1007/BF02666659 ↗
18. R.-M. Keller, S.P. Baker, and E. Arzt: J. Mater. Res., 1998, vol. 13, pp. 1307–317.10.1557/JMR.1998.0186 ↗
19. H. Huang and F. Spaepen: Acta Mater., 2000, vol. 48, pp. 3261–269.10.1016/S1359-6454(00)00128-2 ↗
20. M. Hommel and O. Kraft: Acta Mater., 2001, vol. 49, pp. 3935–947.10.1016/S1359-6454(01)00293-2 ↗
21. D.Y.W. Yu and F. Spaepen: J. Appl. Phys., 2004, vol. 95, pp. 2991–997.10.1063/1.1644634 ↗
22. A.A. Benzerga and N.F. Shaver: Scr. Mater., 2006, vol. 54, pp. 1937–941.10.1016/j.scriptamat.2006.02.003 ↗
23. R. Venkatraman and J.C. Bravman: J. Mater. Res., 1992, vol. 7, pp. 2040–48.10.1557/JMR.1992.2040 ↗
24. A. Srivastava, S. Gopagoni, A. Needleman, V. Seetharaman, A. Staroselsky, and R. Banerjee: Acta Mater., 2012, vol. 60, pp. 5697–711.10.1016/j.actamat.2012.06.043 ↗
25. M. Brunner, M. Bensch, R. Völkl, E. Affeldt, and U. Glatzel: Mater. Sci. Eng. A, 2012, vol. 550, pp. 254–62.10.1016/j.msea.2012.04.067 ↗
26. B. Cassenti and A. Staroselsky: Mater. Sci. Eng. A, 2009, vol. 508, pp. 183–89.10.1016/j.msea.2008.12.051 ↗
27. W.L. Finlay and J.A. Snyder: JOM, 1950, vol. 2, pp. 277–86.10.1007/BF03399001 ↗
28. J. Baillieux, D. Poquillon, and B. Malard: J. Appl. Crystallogr., 2016, vol. 49, pp. 175–81.10.1107/S1600576715022906 ↗
29. G. Baur and P. Lehr: J. Less-Common Met., 1980, vol. 69, pp. 203–18.10.1016/0022-5088(80)90055-7 ↗
30. M. Yan, W. Xu, M.S. Dargusch, H.P. Tang, M. Brandt, and M. Qian: Powder Metall., 2014, vol. 57, pp. 251–57.10.1179/1743290114Y.0000000108 ↗
31. F.B. Vicente, D.R.N. Correa, T.A.G. Donato, V.E. Arana-Chavez, M.A.R. Buzalaf, and C.R. Grandini: Materials (Basel), 2014, vol. 7, pp. 542–53.10.3390/ma7010542 ↗
32. D. Texier, Q. Sirvin, V. Velay, M. Salem, D. Monceau, B. Mazères, E. Andrieu, R. Roumiguier, and B.B. Dod: Titanium 2019, 2020, pp. 0–4.
33. B. Barkia, J.P. Couzinié, S. Lartigue-Korinek, I. Guillot, and V. Doquet: Mater. Sci. Eng. A, 2017, 703, vol. 703.10.1016/j.msea.2017.07.040 ↗
34. Y. Chong, M. Poschmann, R. Zhang, S. Zhao, M.S. Hooshmand, E. Rothchild, D.L. Olmsted, J.W. Morris, D.C. Chrzan, M. Asta, and A.M. Minor: Sci. Adv., 2020, vol. 6, pp. 1–11.
35. P. Stratton: Int. Heat Treat. Surf. Eng., 2013, vol. 7, pp. 70–73.10.1179/1749514813Z.00000000053 ↗
36. M. Zupan and K.J. Hemker: Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 810–14.10.1016/S0921-5093(01)01042-5 ↗
37. M. Zupan, D.M. Dimiduk, and K.J. Hemker: MRS Online Proc. Libr., 1999, vol. 552, pp. 1–6.
38. R.R. Boyer: Mater. Sci. Eng. A, 1996, vol. 213, pp. 103–14.10.1016/0921-5093(96)10233-1 ↗
39. R. Gaddam, B. Sefer, R. Pederson, and M.L. Antti: IOP Conf. Ser. Mater. Sci. Eng., 2002, vol. 48, p. 1.
40. D. Texier, D. Monceau, J.C. Salabura, R. Mainguy, and E. Andrieu: Mater. High Temp., 2016, vol. 33, pp. 325–37.10.1080/09603409.2016.1182250 ↗
41. D. Lunt, X. Xu, T. Busolo, J. Quinta da Fonseca, and M. Preuss: Scr. Mater., 2018, vol. 145, pp. 45–49.10.1016/j.scriptamat.2017.10.012 ↗
42. M.A. Sutton, J.J. Orteu, and H.W. Schreier: Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts Theory and Applications, Springer, Boston, 2009.
43. N. Vaché, Y. Cadoret, B. Dod, and D. Monceau: Corros. Sci., 2021, vol. 178, p. 109041.10.1016/j.corsci.2020.109041 ↗
44. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671–75.10.1038/nmeth.2089 ↗
45. M. Surand. Institut National Polytechnique de Toulouse. PhD Thesis, Université de Toulouse, 2013.
46. J. Baillieux. Institut National Polytechnique de Toulouse. PhD Thesis, Université de Toulouse, 2015.
47. E. Hug and C. Keller: Metall. Mater. Trans. A, 2010, 41, 2498–506.10.1007/s11661-010-0286-3 ↗
48. C. Keller, E. Hug, and D. Chateigner: Mater. Sci. Eng. A, 2009, vol. 500, pp. 207–15.10.1016/j.msea.2008.09.054 ↗
49. R.N. Shenoy, J. Unnam, and R.K. Clark: Oxid. Met., 1986, vol. 26, pp. 105–24.10.1007/BF00664276 ↗
50. H.E. Evans: Int. Mater. Rev., 1995, vol. 40, pp. 1–40.10.1179/imr.1995.40.1.1 ↗
51. A. Casadebaigt, D. Monceau, and J. Hugues: MATEC Web Conf., 2020, vol. 321, p. 03006.10.1051/matecconf/202032103006 ↗
52. C.H. Ward, A.W. Thompson, and J.C. Williams: Scr. Metall. Mater., 1993, vol. 28, pp. 1017–21.10.1016/0956-716X(93)90002-A ↗
53. T.A. Parthasarathy, W.J. Porter, S. Boone, R. John, and P. Martin: Scr. Mater., 2011, vol. 65, p. 65.10.1016/j.scriptamat.2011.05.025 ↗
54. R.S. Mishra, D. Bannerjee, and A.K. Mukherjee: Mater. Sci. Eng. A, 1995, vol. 192–193, pp. 763–68.10.1016/0921-5093(94)03311-0 ↗
55. C.H. Ward, A.W. Thompson, and J.C. Williams: Metall. Mater. Trans. A, 1995, vol. 26, pp. 703–20.10.1007/BF02663919 ↗
56. R. Foerch, A. Madsen, and H. Ghonem: Metall. Trans. A, 1993, vol. 24, pp. 1321–332.10.1007/BF02668200 ↗
57. J.C. Williams, A.W. Sommer, and P.P. Tung: Metall. Trans., 1972, vol. 3, pp. 2979–984.10.1007/BF02652870 ↗
58. M.P. Echlin, J.C. Stinville, V.M. Miller, W.C. Lenthe, and T.M. Pollock: Acta Mater., 2016, vol. 114, pp. 164–75.10.1016/j.actamat.2016.04.057 ↗
59. C. Desgranges, F. Lequien, E. Aublant, M. Nastar, and D. Monceau: Oxid. Met., 2013, vol. 79, pp. 93–105.10.1007/s11085-012-9328-0 ↗
60. A.D. Smigelskas and E.O. Kirkendall: Trans. AIME, 1947, vol. 171, pp. 130–42.
61. B.W. Dunnington, F.H. Beck, and M.G. Fontana: Corrosion, 1952, vol. 8, pp. 2–12.10.5006/0010-9312-8.1.2 ↗
62. R. Francis and D.G. Lees: Mater. Sci. Eng. A, 1989, vol. 120–121, pp. 97–99.10.1016/0921-5093(89)90724-7 ↗
63. S. Perusin, B. Viguier, D. Monceau, L. Ressier, and E. Andrieu: Acta Mater., 2004, vol. 52, pp. 5375–80.10.1016/j.actamat.2004.07.043 ↗
64. C.M. Wang, A. Genc, H. Cheng, L. Pullan, D.R. Baer, and S.M. Bruemmer: Sci. Rep., 2015, vol. 4, pp. 1–6.
65. S. Dryepondt, D. Monceau, F. Crabos, and E. Andrieu: Acta Mater., 2005, vol. 53, pp. 4199–4209.10.1016/j.actamat.2005.05.018 ↗
66. K. Prasad and V.K. Varma: Mater. Sci. Eng. A, 2008, vol. 486, pp. 158–66.10.1016/j.msea.2007.09.020 ↗
67. P. Rodriguez: Bull. Mater. Sci., 1984, vol. 6, pp. 653–63.10.1007/BF02743993 ↗
68. A.H. Cottrell: Philos. Mag., 1953, vol. 44, pp. 829–32.10.1080/14786440808520347 ↗
69. A.M. Garde, A.T. Santhanam, and R.E. Reed-Hill: Acta Metall., 1972, vol. 20, pp. 215–20.10.1016/0001-6160(72)90183-6 ↗
70. M. Doner and H. Conrad: Metall. Trans., 1973, vol. 4, pp. 2809–17.10.1007/BF02644581 ↗
71. K. Prasad: Mater. Sci. Technol., 2010, vol. 26, pp. 1068–72.10.1179/174328408X302422 ↗
72. H. Jousset. École Nationale Supérieure des Mines de Paris. PhD Thesis, 2008.
73. H. Conrad: Prog. Mater. Sci., 1981, vol. 26, pp. 123–403.10.1016/0079-6425(81)90001-3 ↗
74. J.M. Robinson and M.P. Shaw: Mater. Sci. Eng. A, 1992, vol. 159, pp. 159–65.10.1016/0921-5093(92)90284-8 ↗
75. J. Zdunek, W.L. Spychalski, J. Mizera, and K.J. Kurzydłowski: Mater. Charact., 2007, vol. 58, pp. 46–50.10.1016/j.matchar.2006.03.009 ↗
76. A. van den Beukel: Phys. Status Solidi, 1975, vol. 30, pp. 197–206.10.1002/pssa.2210300120 ↗
77. A. Van Den Beukel and U.F. Kocks: Acta Metall., 1982, vol. 30, pp. 1027–34.10.1016/0001-6160(82)90211-5 ↗
78. A.T. Santhanam and R.E. Reed-Hill: Metall. Trans., 1971, vol. 2, pp. 2619–22.10.1007/BF02814903 ↗
79. O.N. Senkov and J.J. Jonas: Metall. Mater. Trans. A, 1996, vol. 27, pp. 1877–87.10.1007/BF02651937 ↗