Toward Strength–Ductility Synergy of Cu-Bearing High-Manganese Steels: The Deformation Mechanism and Nano-precipitation
Source abstract
Abstract
The deformation mechanism plays a crucial role in the strength–ductility of high-manganese steels, but the influences of stacking fault energies (SFEs) and nano-precipitation on the strength–ductility are still not understood in depth. In the present study, the effects of Ni/Al addition and aging on the strength–ductility of Cu-bearing high-manganese steels were carefully investigated. The mechanical stability of austenite and SFEs of Cu-bearing high-manganese steels increases with Ni/Al addition which led to a change in the dominant deformation mechanisms from transformation-induced plasticity to twinning-induced plasticity. The serrated flows in the strain–stress curves of the Ni/Al-bearing steels were delayed, which resulted in the simultaneous enhancement of the tensile strength and elongation. In the case of aged NiAl steel, co-precipitates with Cu-rich precipitates (CRPs) and NiAl particles were precipitated and the mechanical stability of austenite was reduced. Also, the tensile strength and elongation were slightly increased. The results indicate that the extent of enhancement in strength–ductility of Cu-bearing high-manganese steels due to deformation by Ni/Al addition was greater than nano-precipitation by aging.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. S. Kang, Y.-S. Jung, J.-H. Jun, and Y.-K. Lee: Mater. Sci. Eng. A, 2010, vol. 527, pp. 745–51.10.1016/j.msea.2009.08.048 ↗
2. A. Dumay, J.P. Chateau, S. Allain, S. Migot, and O. Bouaziz: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2008, vol. 483–84, pp. 184–87.10.1016/j.msea.2006.12.170 ↗
3. S. Lee, J. Kim, S.J. Lee, and B.C. De Cooman: Scr. Mater., 2011, vol. 65, pp. 1073–76.10.1016/j.scriptamat.2011.09.019 ↗
4. S. Curtze and V.T. Kuokkala: Acta Mater., 2010, vol. 58, pp. 5129–41.10.1016/j.actamat.2010.05.049 ↗
5. J.K. Kim and B.C. De Cooman: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2016, vol. 676, pp. 216–31.10.1016/j.msea.2016.08.106 ↗
6. C.A. Stewart, R.W. Fonda, and K.E. Knipling: Scr. Mater., 2021, vol. 200, p. 113903.10.1016/j.scriptamat.2021.113903 ↗
7. H.J. Kong, T. Yang, R. Chen, S.Q. Yue, T.L. Zhang, B.X. Cao, C. Wang, W.H. Liu, J.H. Luan, Z.B. Jiao, B.W. Zhou, L.G. Meng, A. Wang, and C.T. Liu: Scr. Mater., 2020, vol. 186, pp. 213–18.10.1016/j.scriptamat.2020.05.008 ↗
8. J.H. Choi, M.C. Jo, H. Lee, A. Zargaran, T. Song, S.S. Sohn, N.J. Kim, and S. Lee: Acta Mater., 2019, vol. 166, pp. 246–60.10.1016/j.actamat.2018.12.044 ↗
9. J. Kim, S.-J. Lee, and B.C. De Cooman: Scr. Mater., 2011, vol. 65, pp. 363–66.10.1016/j.scriptamat.2011.05.014 ↗
10. X. Peng, D.Y. Zhu, Z.M. Hu, W.F. Yi, H.J. Liu, and M.J. Wang: Mater. Des., 2013, vol. 45, pp. 518–23.10.1016/j.matdes.2012.09.014 ↗
11. J.K. Hwang: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2018, vol. 737, pp. 188–97.10.1016/j.msea.2018.09.049 ↗
12. L.Y. Zhao, D.Y. Zhu, L.L. Liu, Z.M. Hu, and M.J. Wang: Acta Metall Sin.-Engl. Lett., 2014, vol. 27, pp. 601–08.10.1007/s40195-014-0100-0 ↗
13. R. Kalsar, R.K. Ray, and S. Suwas: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2018, vol. 729, pp. 385–97.10.1016/j.msea.2018.05.071 ↗
14. M.C. Jo, J. Yoo, M.C. Jo, A. Zargaran, S.S. Sohn, N.J. Kim, and S. Lee: J. Mater. Sci. Technol., 2020, vol. 43, pp. 44–51.10.1016/j.jmst.2020.01.021 ↗
15. H.J. Song, J. Yoo, S.H. Kim, S.S. Sohn, M. Koo, N.J. Kim, and S. Lee: Acta Mater., 2017, vol. 135, pp. 215–25.10.1016/j.actamat.2017.06.035 ↗
16. Y. Zou, Y.B. Xu, D.T. Han, Z.P. Hu, R.D.K. Misra, L.F. Cao, and H. Song: J. Mater. Sci., 2019, vol. 54, pp. 3438–54.10.1007/s10853-018-3021-x ↗
17. D. Jain, D. Isheim, A.H. Hunter, and D.N. Seidman: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 2016, vol. 47A, pp. 3860–72.10.1007/s11661-016-3569-5 ↗
18. M. Kapoor, D. Isheim, G. Ghosh, S. Vaynman, M.E. Fine, and Y.W. Chung: Acta Mater., 2014, vol. 73, pp. 56–74.10.1016/j.actamat.2014.03.051 ↗
19. Z.B. Jiao, J.H. Luan, M.K. Miller, and C.T. Liu: Acta Mater., 2015, vol. 97, pp. 58–67.10.1016/j.actamat.2015.06.063 ↗
20. J.C. Yan, H.W. Xu, X.W. Zuo, T. Jia, and E.G. Wang: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2019, vol. 739, pp. 225–34.10.1016/j.msea.2018.10.036 ↗
21. B.G. Zhang, X.M. Zhang, G.D. Wang, and H.T. Liu: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2019, vol. 756, pp. 35–40.10.1016/j.msea.2019.04.019 ↗
22. Y. Li, W. Li, N. Min, H. Liu, and X. Jin: Int. J. Plast., 2020, vol. 133, p. 102805.10.1016/j.ijplas.2020.102805 ↗
23. Z. Yuan, T. Xi, C.G. Yang, H.Y. Zhao, and K. Yang: Mater. Lett., 2020, vol. 272, pp. 1–4.10.1016/j.matlet.2020.127815 ↗
24. G. Han, Z.J. Xie, B. Lei, W.Q. Liu, H.H. Zhu, Y. Yan, R.D.K. Misra, and C.J. Shang: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2018, vol. 730, pp. 119–36.10.1016/j.msea.2018.05.080 ↗
25. J.H. Hwang, T.T.T. Trang, O. Lee, G. Park, A. Zargaran, and N.J. Kim: Acta Mater., 2020, vol. 191, pp. 1–2.10.1016/j.actamat.2020.03.022 ↗
26. H.K. Yang, Z.J. Zhang, and Z.F. Zhang: Scr. Mater., 2013, vol. 68, pp. 992–95.10.1016/j.scriptamat.2013.02.060 ↗
27. Z.H. Cai, H. Ding, R.D.K. Misra, and H. Kong: Scr. Mater., 2014, vol. 71, pp. 5–8.10.1016/j.scriptamat.2013.09.009 ↗
28. Z.H. Cai, H. Ding, R.D.K. Misra, and Z.Y. Ying: Acta Mater., 2015, vol. 84, pp. 229–36.10.1016/j.actamat.2014.10.052 ↗
29. B.C. De Cooman, Y. Estrin, and S.K. Kim: Acta Mater., 2018, vol. 142, pp. 283–362.10.1016/j.actamat.2017.06.046 ↗
30. S.J. Lee, J. Kim, S.N. Kane, and B.C. De Cooman: Acta Mater., 2011, vol. 59, pp. 6809–19.10.1016/j.actamat.2011.07.040 ↗
31. M. Koyama, T. Sawaguchi, T. Lee, C.S. Lee, and K. Tsuzaki: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2011, vol. 528, pp. 7310–16.10.1016/j.msea.2011.06.011 ↗
32. A.P. Bentley and G.C. Smith: Metall. Trans. A, 1986, vol. 17, pp. 1593–1600.10.1007/BF02650096 ↗
33. K. Sugimoto, B.Z. Yu, Y. Mukai, and S. Ikeda: ISIJ Int., 2005, vol. 45, pp. 1194–1200.10.2355/isijinternational.45.1194 ↗
34. B.B. He, H.W. Luo, and M.X. Huang: Int. J. Plast., 2016, vol. 78, pp. 173–86.10.1016/j.ijplas.2015.11.004 ↗
35. S. Liu, L.H. Qian, J.Y. Meng, D.D. Li, P.H. Ma, and F.C. Zhang: Scr. Mater., 2017, vol. 127, pp. 10–14.10.1016/j.scriptamat.2016.08.034 ↗
36. B.B. Zhang, F.K. Yan, M.J. Zhao, N.R. Tao, and K. Lu: Acta Mater., 2018, vol. 151, pp. 310–20.10.1016/j.actamat.2018.04.001 ↗
37. S.H. Kim, H. Kim, and N.J. Kim: Nature, 2015, vol. 518, p. 77.10.1038/nature14144 ↗
38. Y. Zhang, N.R. Tao, and K. Lu: Scr. Mater., 2009, vol. 60, pp. 211–13.10.1016/j.scriptamat.2008.10.005 ↗
39. M.A. Meyers, O. Vohringer, and V.A. Lubarda: Acta Mater., 2001, vol. 49, pp. 4025–39.10.1016/S1359-6454(01)00300-7 ↗
40. K.Y.M.C. Niu, J.H. Luan, W. Wang, and Z.B. Jiao: J. Mater. Sci. Technol., 2022, vol. 104, pp. 52–58.10.1016/j.jmst.2021.06.055 ↗
41. O. Bouaziz, S. Allain, C.P. Scott, P. Cugy, and D. Barbier: Curr. Opin. Solid State Mater. Sci., 2011, vol. 15, pp. 141–68.10.1016/j.cossms.2011.04.002 ↗
42. D.K. Guan, W.M. Rainforth, J.H. Gao, J. Sharp, B. Wynne, and L. Ma: Acta Mater., 2017, vol. 135, pp. 14–24.10.1016/j.actamat.2017.06.015 ↗
43. J.H. Gao, S.H. Jiang, H.R. Zhang, Y.H. Huang, D.K. Guan, Y.D. Xu, S.K. Guan, L.A. Bendersky, A.V. Davydov, Y. Wu, H.H. Zhu, Y.D. Wang, Z.P. Lu, and W.M. Rainforth: Nature, 2021, vol. 590, p. 19.10.1038/d41586-021-00249-y ↗
44. S. Lee and B.C. De Cooman: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 2014, vol. 45A, pp. 709–16.10.1007/s11661-013-2047-6 ↗
45. S. Curtze, V.T. Kuokkala, A. Oikari, J. Talonen, and H. Hanninen: Acta Mater., 2011, vol. 59, pp. 1068–76.10.1016/j.actamat.2010.10.037 ↗
46. Z.J. Zhang, H.W. Sheng, Z.J. Wang, B. Gludovatz, Z. Zhang, E.P. George, Q. Yu, S.X. Mao, and R.O. Ritchie: Nat. Commun., 2017, https://doi.org/10.1038/ncomms14390.10.1038/ncomms14390 ↗
47. X. Fu, X. Wu, and Q. Yu: Mater. Today Nano, 2018, vol. 3, pp. 48–53.10.1016/j.mtnano.2018.11.004 ↗
48. M.Y. Murashkin, I. Sabirov, A.E. Medvedev, N.A. Enikeev, W. Lefebvre, R.Z. Valiev, and X. Sauvage: Mater. Des., 2016, vol. 90, pp. 433–42.10.1016/j.matdes.2015.10.163 ↗
49. Y. Chen, N. Gao, G. Sha, S.P. Ringer, and M.J. Starink: Acta Mater., 2016, vol. 109, pp. 202–12.10.1016/j.actamat.2016.02.050 ↗
50. J.Y. He, H. Wang, H.L. Huang, X.D. Xu, M.W. Chen, Y. Wu, X.J. Liu, T.G. Nieh, K. An, and Z.P. Lu: Acta Mater., 2016, vol. 102, pp. 187–96.10.1016/j.actamat.2015.08.076 ↗
51. N. Kamikawa, Y. Abe, G. Miyamoto, Y. Funakawa, and T. Furuhara: ISIJ Int., 2014, vol. 54, pp. 212–21.10.2355/isijinternational.54.212 ↗
52. C. Booth-Morrison, D.C. Dunand, and D.N. Seidman: Acta Mater., 2011, vol. 59, pp. 7029–42.10.1016/j.actamat.2011.07.057 ↗
53. H.M. Wen, T.D. Topping, D. Isheim, D.N. Seidman, and E.J. Lavernia: Acta Mater., 2013, vol. 61, pp. 2769–82.10.1016/j.actamat.2012.09.036 ↗
54. K.K. Ma, H.M. Wen, T. Hu, T.D. Topping, D. Isheim, D.N. Seidman, E.J. Lavernia, and J.M. Schoenung: Acta Mater., 2014, vol. 62, pp. 141–55.10.1016/j.actamat.2013.09.042 ↗
55. Y. Li, Y.H. Zhao, V. Ortalan, W. Liu, Z.H. Zhang, R.G. Vogt, N.D. Browning, E.J. Lavernia, and J.M. Schoenung: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2009, vol. 527, pp. 305–16.10.1016/j.msea.2009.07.067 ↗
56. R. Gupta, G.P. Chaudhari, and B.S.S. Daniel: Composites Part B-Engineering, 2018, vol. 140, pp. 27–34.10.1016/j.compositesb.2017.12.005 ↗
57. J. Han, S.J. Lee, J.G. Jung, and Y.K. Lee: Acta Mater., 2014, vol. 78, pp. 369–77.10.1016/j.actamat.2014.07.005 ↗
58. V.S.Y. Injeti, Z.C. Li, B. Yu, R.D.K. Misra, Z.H. Cai, and H. Ding: J. Mater. Sci. Technol., 2018, vol. 34, pp. 745–55.10.1016/j.jmst.2017.11.011 ↗
59. J.E. Jin and Y.K. Lee: Acta Mater., 2012, vol. 60, pp. 1680–688.10.1016/j.actamat.2011.12.004 ↗
60. H.-Y. Yu, S.-M. Lee, J.-H. Nam, S.-J. Lee, D. Fabregue, M.-H. Park, N. Tsuji, and Y.-K. Lee: Acta Mater., 2017, vol. 131, pp. 435–44.10.1016/j.actamat.2017.04.011 ↗
61. X. Li, L.Q. Chen, Y. Zhao, and R.D.K. Misra: Mater. Des., 2018, vol. 142, pp. 190–202.10.1016/j.matdes.2018.01.026 ↗