Correlation Between Plasma Electrolytic Oxidation Coating on Ti6Al4V Alloy and Cathode Current
Source abstract
Abstract
Plasma electrolytic oxidation (PEO) is a common surface treatment method to improve the properties of titanium alloys. Here, the structure, composition and corrosion resistance of the PEO coating treated in silicate electrolyte was investigated to uncover the effect of cathode current on PEO and how softening sparks work using bipolar mode (soft sparking mode), scanning electron microscope, X-ray energy dispersive spectrometer, transmission electron microscope, X-ray diffraction and potentiodynamic polarization test. The results show that the cathode current can reduce the spark intensity, promote the spark to migrate to the inner coating, resulting in a dense and thick inner layer. Besides, the cathode current can promote the type-A discharge, thus forming bubble-like oxide protrusions and bowl-like pits on the coating surface. The formation of TiO2 is inhibited with the cathode current increasing, so the thickness of the coating and the amorphous layer at the coating/substrate interface decreases. The spark causes SiO32− to form amorphous SiO2 which deposits around the pores. The existence of filamentous discharge in the inner layer was confirmed by observing SiO2 deposition location. After spark softening, coating growth is achieved by forming amorphous TiO2, but softening sparks can promote the transformation of amorphous TiO2 into rutile and anatase around them. The increasing cathode current increases the amount of electrolyte ions deposited in the outer layer, which provides a new method for functional coating prepared by using particle deposition.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. L. Wang, W. Fu, G. Yi, Z. Chen, Z. Gao, and Q. Pan: Membranes, 2022, vol. 12, p. 516. https://doi.org/10.3390/membranes12050516.10.3390/membranes12050516 ↗
2. V. Grebnevs, K. Lesniak-Ziolkowska, M. Wala, M. Dulski, S. Altundal, A. Dutovs, L. Avotina, D. Erts, R. Viter, A. Viksna, and W. Simka: Appl. Surf. Sci., 2022, vol. 598, 153793. https://doi.org/10.1016/j.apsusc.2022.153793.10.1016/j.apsusc.2022.153793 ↗
3. M. Adigamova, I. Lukiyanchuk, I. Tkachenko, and V. Morozova: Mater. Chem. Phys., 2022, vol. 275, 125231https://doi.org/10.1016/j.matchemphys.2021.125231.10.1016/j.matchemphys.2021.125231 ↗
4. C. Yang, S. Cui, Z. Wu, J. Zhu, J. Huang, Z. Ma, R. Fu, X. Tian, P. Chu, and Z. Wu: Tribol. Int., 2021, vol. 160, 107018. https://doi.org/10.1016/j.triboint.2021.107018.10.1016/j.triboint.2021.107018 ↗
5. X. Zhang, G. Cai, Y. Lv, Y. Wu, and Z. Dong: Surf. Coat. Technol., 2020, vol. 400, 126202. https://doi.org/10.1016/j.surfcoat.2020.126202.10.1016/j.surfcoat.2020.126202 ↗
6. T. Narayanan, J. Kim, and H. Park: Appl. Surf. Sci., 2020, vol. 504, 144388. https://doi.org/10.1016/j.apsusc.2019.144388.10.1016/j.apsusc.2019.144388 ↗
7. M. Becerikli, A. Kopp, N. Kroger, M. Bodrova, C. Wallner, J. Wagner, M. Dadras, B. Jettkant, F. Pohl, M. Lehnhardt, O. Jung, and B. Behr: Mater. Sci. Eng. C-Mater. Biol. Appl., 2021, vol. 123, 112030. https://doi.org/10.1016/j.msec.2021.112030.10.1016/j.msec.2021.112030 ↗
8. D. Mashtalyar, K. Nadaraia, I. Imshinetskiy, E. Belov, V. Filonina, S. Suchkov, S. Sinebryukhov, and S. Gnedenkov: Appl. Surf. Sci., 2021, vol. 536, 147976. https://doi.org/10.1016/j.apsusc.2020.147976.10.1016/j.apsusc.2020.147976 ↗
9. M. Martinez-Viademonte, S. Abrahami, T. Hack, M. Burchardt, and H. Terryn: Coatings, 2020, vol. 10, p. 1106. https://doi.org/10.3390/coatings10111106.10.3390/coatings10111106 ↗
10. D. Zhai, K. Feng, and H. Yue: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2019, vol. 50A, pp. 2507–18. https://doi.org/10.1007/s11661-019-05185-1.10.1007/s11661-019-05185-1 ↗
11. M. Molaei, M. Nouri, K. Babaei, and A. Fattah-Alhosseini: Surf. Interfaces, 2021, vol. 22, 100888. https://doi.org/10.1016/j.surfin.2020.100888.10.1016/j.surfin.2020.100888 ↗
12. A. Bu, Y. Zhang, Y. Xiang, W. Chen, H. Cheng, and L. Wang: J. Mater. Sci. Mater. Electron., 2020, vol. 31, pp. 17067–74. https://doi.org/10.1007/s10854-020-04264-z.10.1007/s10854-020-04264-z ↗
13. M. Nadimi and C. Dehghanian: Ceram. Int., 2021, vol. 47, pp. 33413–25. https://doi.org/10.1016/j.ceramint.2021.08.248.10.1016/j.ceramint.2021.08.248 ↗
14. N. Ao, D. Liu, X. Zhang, and G. He: J. Alloys Compd., 2020, vol. 823, 153823. https://doi.org/10.1016/j.jallcom.2020.153823.10.1016/j.jallcom.2020.153823 ↗
15. A. Bordbar-Khiabani, S. Ebrahimi, and B. Yarmand: Corros. Sci., 2020, vol. 173, 108781. https://doi.org/10.1016/j.corsci.2020.108781.10.1016/j.corsci.2020.108781 ↗
16. D.S. Tsai and C.C. Chou: Metals, 2018, vol. 8, p. 105. https://doi.org/10.3390/met8020105.10.3390/met8020105 ↗
17. D.S. Tsai, G.W. Chen, and C.C. Chou: Surf. Coat. Technol., 2019, vol. 357, pp. 235–43. https://doi.org/10.1016/j.surfcoat.2018.09.080.10.1016/j.surfcoat.2018.09.080 ↗
18. M. Shao, W. Wang, H. Yang, X. Zhang, and X. He: Coatings, 2021, vol. 11, p. 1288. https://doi.org/10.3390/coatings11111288.10.3390/coatings11111288 ↗
19. A.B. Rogov, A. Yerokhin, and A. Matthews: Langmuir, 2017, vol. 33, pp. 11059–69. https://doi.org/10.1021/acs.langmuir.7b02284.10.1021/acs.langmuir.7b02284 ↗
20. R. Hussein, P. Zhang, X. Nie, Y. Xia, and D. Northwood: Surf. Coat. Technol., 2011, vol. 206, pp. 1990–97. https://doi.org/10.1016/j.surfcoat.2011.08.060.10.1016/j.surfcoat.2011.08.060 ↗
21. M. Rahmati, K. Raeissi, M. Toroghinejad, A. Hakimizad, and M. Santamaria: Coatings, 2019, vol. 9, p. 688. https://doi.org/10.3390/coatings9100688.10.3390/coatings9100688 ↗
22. Z. Yao, Y. Jiang, F. Jia, Z. Jiang, and F. Wang: Appl. Surf. Sci., 2008, vol. 254, pp. 4084–91. https://doi.org/10.1016/j.apsusc.2007.12.062.10.1016/j.apsusc.2007.12.062 ↗
23. Z. Yao, Y. Liu, Y. Xu, Z. Jiang, and F. Wang: Mater. Chem. Phys., 2011, vol. 126, pp. 227–31. https://doi.org/10.1016/j.matchemphys.2010.11.035.10.1016/j.matchemphys.2010.11.035 ↗
24. R.O. Hussein, X. Nie, and D.O. Northwood: Mater. Chem. Phys., 2012, vol. 134, pp. 484–92. https://doi.org/10.1016/j.matchemphys.2012.03.020.10.1016/j.matchemphys.2012.03.020 ↗
25. S. Aliasghari, P. Skeldon, and G.E. Thompson: Appl. Surf. Sci., 2014, vol. 316, pp. 463–76. https://doi.org/10.1016/j.apsusc.2014.08.037.10.1016/j.apsusc.2014.08.037 ↗
26. W. Gebarowski and S. Pietrzyk: Arch. Metall. Mater., 2014, vol. 59, pp. 407–11. https://doi.org/10.2478/amm-2014-0070.10.2478/amm-2014-0070 ↗
27. M. Laveissiere, H. Cerda, J. Roche, L. Cassayre, and L. Arurault: Surf. Coat. Technol., 2019, vol. 361, pp. 50–62. https://doi.org/10.1016/j.surfcoat.2018.12.122.10.1016/j.surfcoat.2018.12.122 ↗
28. J. Han, Y. Cheng, W. Tu, T. Zhan, and Y. Cheng: Appl. Surf. Sci., 2018, vol. 428, pp. 684–97. https://doi.org/10.1016/j.apsusc.2017.09.109.10.1016/j.apsusc.2017.09.109 ↗
29. W. Cui, L. Jin, and L. Zhou: Mater. Sci. Eng. C Mater. Biol. Appl., 2013, vol. 33, pp. 3775–79. https://doi.org/10.1016/j.msec.2013.05.011.10.1016/j.msec.2013.05.011 ↗
30. T. Teh, A. Berkani, S. Mato, P. Skeldon, G.E. Thompson, H. Habazaki, and K. Shimizu: Corros. Sci., 2003, vol. 45, pp. 2757–68. https://doi.org/10.1016/S0010-938X(03)00101-X.10.1016/S0010-938X(03)00101-X ↗
31. A. Hakimizad, K. Raeissi, M. Santamaria, and M. Asghari: Electrochim. Acta, 2018, vol. 284, pp. 618–29. https://doi.org/10.1016/j.electacta.2018.07.200.10.1016/j.electacta.2018.07.200 ↗
32. R. Hussein, X. Nie, D. Northwood, A. Yerokhin, and A. Matthews: J. Phys. D-Appl. Phys., 2010, vol. 43, 105203. https://doi.org/10.1088/0022-3727/43/10/105203.10.1088/0022-3727/43/10/105203 ↗
33. Q. Li, W. Yang, C. Liu, D. Wang, and J. Liang: Surf. Coat. Technol., 2017, vol. 316, pp. 162–70. https://doi.org/10.1016/j.surfcoat.2017.03.021.10.1016/j.surfcoat.2017.03.021 ↗
34. H.B. Wang, D. Zhai, and K. Feng: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2021, vol. 52, pp. 4691–702. https://doi.org/10.1007/s11661-021-06421-3.10.1007/s11661-021-06421-3 ↗
35. S. Tsunekawa, Y. Aoki, and H. Habazaki: Surf. Coat. Technol., 2011, vol. 205, pp. 4732–40. https://doi.org/10.1016/j.surfcoat.2011.04.060.10.1016/j.surfcoat.2011.04.060 ↗
36. A. Lugovskoy and S. Lugovskoy: Mater. Sci. Eng. C Mater., 2014, vol. 43, pp. 527–32. https://doi.org/10.1016/j.msec.2014.07.030.10.1016/j.msec.2014.07.030 ↗
37. E. Poorqasemi, O. Abootalebi, M. Peikari, and F. Haqdar: Corros. Sci., 2009, vol. 51, pp. 1043–54. https://doi.org/10.1016/j.corsci.2009.03.001.10.1016/j.corsci.2009.03.001 ↗
38. M. Chiku, W. Tsujiwaki, E. Higuchi, and H. Inoue: J. Power Sources, 2013, vol. 244, pp. 675–78. https://doi.org/10.1016/j.jpowsour.2012.12.047.10.1016/j.jpowsour.2012.12.047 ↗
39. J. Bockris: J. Chem. Phys., 1956, vol. 24, pp. 817–27. https://doi.org/10.1063/1.1742616.10.1063/1.1742616 ↗
40. X. Wang, S. Hu, W. Li, and Y. Hu: Constr. Build. Mater., 2022, vol. 337, 127572. https://doi.org/10.1016/j.conbuildmat.2022.127572.10.1016/j.conbuildmat.2022.127572 ↗
41. Q. Tang, T. Qiu, P. Ni, D. Zhai, and J. Shen: Coatings, 2022, vol. 12, p. 1191. https://doi.org/10.3390/coatings12081191.10.3390/coatings12081191 ↗
42. H. Chen, J. Shen, J. Deng, Y. Hu, and Y. Zhang: Appl. Surf. Sci., 2020, vol. 508, 145285. https://doi.org/10.1016/j.apsusc.2020.145285.10.1016/j.apsusc.2020.145285 ↗
43. A. Pergament, A. Velichko, V. Putrolaynen, G. Stefanovich, N. Kuldin, A. Cheremisin, I. Feklistov, and N. Khomlyuk: J. Phys. D Appl. Phys., 2008, vol. 41, p. 225306. https://doi.org/10.1088/0022-3727/41/22/225306.10.1088/0022-3727/41/22/225306 ↗
44. R.S. Alwitt: J. Electrochem. Soc., 1987, vol. 134, pp. 1891–96. https://doi.org/10.1149/1.2100784.Author.10.1149/1.2100784.Author ↗