journal article·2023-02

Quantification of Dynamic Softening Kinetics of Duplex Stainless Steel Using Constituent Flow Stresses With Inverse Analysis

Kyunghyun Kim, Hyung-Won Park, Hyeon-Woo Park, Jun Yanagimoto

Publisher page

Abstract

This paper presents a method for quantifying the dynamic softening kinetics of duplex stainless steel. An inverse analysis of the experimental results is performed through axial compression tests at deformation temperatures of 1050 °C, 1150 °C, and 1250 °C and strain rates of 0.1, 1, and 10 s−1 for SUS329J4L duplex stainless to determine the material parameters. Subsequently, regression analysis is performed to obtain the flow stresses and other material parameters, such as the activation energy. Decoupled flow equations of the austenite and ferrite phases, which combine the stresses of different phases, volume fractions, and parameter (lambda ) of the constituent stress relationship in the equilibrium state regime, are applied to calculate the flow stress of duplex stainless steel. The obtained material parameters are regarded as a dynamic part of the “material genome,” which may be used to explain the softening kinetics associated with plastic deformation and predict the microstructural evolutions during hot deformation processes such as hot forging or rolling. Electron backscatter diffraction analysis reveals heterogeneous microstructural evolutions, which show dominant occurrences of dynamic recrystallization in the austenite phase and dynamic recovery in the ferrite phase during hot compression at the above-mentioned deformation temperatures and strain rates.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. M. Soltanpour and J. Yanagimoto: J. Mater. Process. Technol., 2012, vol. 2012(2), pp. 417–26. https://doi.org/10.1016/j.jmatprotec.2011.10.004.10.1016/j.jmatprotec.2011.10.004 ↗
2. S. Ding, S.A. Khan, and J. Yanagimoto: J. Mater. Sci. Eng. A, 2018, vol. 728, pp. 133–43. https://doi.org/10.1016/j.msea.2018.05.025.10.1016/j.msea.2018.05.025 ↗
3. H.-W. Park, K. Kim, H.-W. Park, and J. Yanagimoto: ISIJ Int., 2020, vol. 60(3), pp. 573–81. https://doi.org/10.2355/isijinternational.ISIJINT-2019-426.10.2355/isijinternational.ISIJINT-2019-426 ↗
4. L. Duprez, B.C. De Cooman, and N. Akdut: Metall. Mater. Trans. A., 2002, vol. 33(7), pp. 1931–38. https://doi.org/10.1007/s11661-002-0026-4.10.1007/s11661-002-0026-4 ↗
5. S. Emami, T. Saeid, and R. Azari Khosroshahi: J. Alloys Compd., 2018, vol. 739, pp. 678–89. https://doi.org/10.1016/j.jallcom.2017.12.310.10.1016/j.jallcom.2017.12.310 ↗
6. N. Kumar, S. Kumar, S.K. Rajput, and S.K. Nath: ISIJ Int., 2017, vol. 57(3), pp. 497–505. https://doi.org/10.2355/isijinternational.ISIJINT-2016-306.10.2355/isijinternational.ISIJINT-2016-306 ↗
7. P. Cizek: Acta Mater., 2016, vol. 106, pp. 129–43. https://doi.org/10.1016/j.actamat.2016.01.012.10.1016/j.actamat.2016.01.012 ↗
8. K. Kim, H.-W. Park, S. Ding, H.-W. Park, and J. Yanagimoto: ISIJ Int., 2020, https://doi.org/10.2355/isijinternational.ISIJINT-2020-122.10.2355/isijinternational.ISIJINT-2020-122 ↗
9. H. Farnoush, A. Momeni, K. Dehghani, J. Aghazadeh, and H. Keshmirib. Mohandesi: Mater. Des., 2010, vol. 30(1), pp. 220–26. https://doi.org/10.1016/j.matdes.2009.06.028.10.1016/j.matdes.2009.06.028 ↗
10. A. Yanagida, J. Liu, and J. Yanagimoto: Mater. Trans., 2003, vol. 44, pp. 2303–10. https://doi.org/10.2320/matertrans.44.2303.10.2320/matertrans.44.2303 ↗
11. T. Senuma, H. Yada, Y. Matsumura, S. Hamauzu, and K. Nakajima: Tetsu-to-Hagane, 1984, vol. 70, pp. 1392–99. https://doi.org/10.2355/tetsutohagane1955.70.10_1392.10.2355/tetsutohagane1955.70.10_1392 ↗
12. S. Ankem, H. Margolin, C.A. Greene, B.W. Neuberger, and P.G. Oberson: Prog. Mater Sci., 2006, vol. 51, pp. 632–709. https://doi.org/10.1016/j.pmatsci.2005.10.003.10.1016/j.pmatsci.2005.10.003 ↗
13. G.I. Taylor: Plastic Strain in Metals, 1938, pp. 307–24.
14. S. Sasaki, T. Katsumura, and H. Ota: Mater. Trans., 2022, vol. 62, pp. 177–84. https://doi.org/10.2320/matertrans.P-M2020863.10.2320/matertrans.P-M2020863 ↗
15. L. Briottet, J.J. Jonas, and F. Montheillet: Acta Mater., 1996, vol. 44, pp. 1665–72. https://doi.org/10.1016/1359-6454(95)00257-X.10.1016/1359-6454(95)00257-X ↗
16. J.M. Cabrera, A. Mateo, L. Llanes, J.M. Prado, and M. Anglada: J. Mater. Process. Technol., 2003, vol. 143, pp. 321–25. https://doi.org/10.1016/S0924-0136(03)00434-5.10.1016/S0924-0136(03)00434-5 ↗
17. S. Spigarelli, M. El Mehtedi, P. Ricci, and C. Mapelli: Mater. Sci. Eng. A, 2010, vol. 16, pp. 4218–28. https://doi.org/10.1016/j.msea.2010.03.029.10.1016/j.msea.2010.03.029 ↗
18. A. Momeni and K. Dehghani: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1448–54. https://doi.org/10.1016/j.msea.2010.11.020.10.1016/j.msea.2010.11.020 ↗
19. N. Haghdadi, P. Cizek, H. Beladi, and P.D. Hodgson: 2017, pp. 1209–37. https://doi.org/10.1080/14786435.2017.129386010.1080/14786435.2017.1293860 ↗
20. J.J. Jonas, X. Quelennec, L. Jiang, and É. Martin: Acta Mater., 2009, vol. 57(9), pp. 2748–56. https://doi.org/10.1016/j.actamat.2009.02.033.10.1016/j.actamat.2009.02.033 ↗
21. A. Yanagida and J. Yanagimoto: J. Mater. Process. Technol., 2004, vol. 15(1–3), pp. 33–38. https://doi.org/10.1016/j.jmatprotec.2004.04.007.10.1016/j.jmatprotec.2004.04.007 ↗
22. T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, and J.J. Jonas: Prog. Mater Sci., 2014, vol. 60, pp. 130–207. https://doi.org/10.1016/j.pmatsci.2013.09.002.10.1016/j.pmatsci.2013.09.002 ↗
23. S. Emami, T. Saeid, and R. AzariKhosroshahi: J. Alloys Compd., 2018, vol. 739, pp. 678–89. https://doi.org/10.1016/j.jallcom.2017.12.310.10.1016/j.jallcom.2017.12.310 ↗
24. N. Kumar, S. Kumar, S.K. Rajput, and S.K. Nath: ISIJ Int., 2017, vol. 57(3), pp. 497–505. https://doi.org/10.2355/isijinternational.ISIJINT-2016-306.10.2355/isijinternational.ISIJINT-2016-306 ↗
25. H.W. Park and J. Yanagimoto: Mater. Sci. Eng. A, 2013, vol. 567, pp. 29–37. https://doi.org/10.1016/j.msea.2012.12.061.10.1016/j.msea.2012.12.061 ↗
26. H.W. Park, K. Shimojima, S. Sugiyama, H. Komine, and J. Yanagimoto: Mater. Sci. Eng. A, 2015, vol. 624, pp. 203–12. https://doi.org/10.1016/j.msea.2014.11.070.10.1016/j.msea.2014.11.070 ↗