journal article·2022-07

The Effect of Ta Additions on a Low γ′ Volume Fraction Ni–Fe Base Superalloy System

Zhuo Liu, Sammy Tin

Publisher page

Abstract

To understand the effect of Ta additions on γ′ precipitate strengthening in low-γ′ fraction Ni–Fe base superalloys, experimental alloys with varying levels of Ti, Nb and Ta were investigated to study their effect on the γ′ solvus temperature, yield strength and γ′ precipitates stability during long-term aging. The results indicate that in the low γ′ fraction alloy system, the γ′ solvus temperature and the fraction of γ′ formed by aging is mostly influenced by the summative value of Al + Ti + Nb + Ta present in the alloy. Additions of Ta are weaker than Ti but stronger than Nb in forming and stabilizing the γ′ precipitates within the microstructure. Correspondingly, the overall yield strength is dominated by the fraction of γ′ precipitate when the sum of Al + Ti + Nb + Ta alloying additions are in the range of 7.3 to 8.3 pct, as about 60 pct of the yield strength is provided via γ′ precipitate strengthening. The antiphase boundary (APB) energy was found to be relatively independent with systematic changes in the Al + Ti + Nb + Ta but determined by the concentration of solute in the γ′ precipitates. Additions of Ta were found to exert an equivalent γ′ strengthening effect as Ti at ambient temperature, but was more potent at 600 °C. The ratio of (Nb + Ta)/(Al + Ti) in the alloy determines the stability and influences the formation of (delta /eta) and γ′ phase. Compared to additions of Ti, the addition of Ta to Ni–Fe base superalloys appear to cause the γ′ precipitates to transform into (delta /eta) phase.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. D.R. Muzyka: Controlling Microstructures and Properties of Superalloys via Use of Precipitated Phases, Carpenter Tech. Corp., Reading, 1971.
2. B.H. Kear and E.R. Thompson: Science., 1980, vol. 208(4446), pp. 847–56.10.1126/science.208.4446.847 ↗
3. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2008.
4. T.M. Pollock and S. Tin: J. Propul. Power., 2006, vol. 22(2), pp. 361–74.10.2514/1.18239 ↗
5. A. Argon: Strengthening Mechanisms in Crystal Plasticity, vol. 4, Oxford University Press, Oxford, 2008.
6. H.A. Roth, C.L. Davis, and R.C. Thomson: Metall. Trans. A., 1997, vol. 28A, pp. 1329–35.10.1007/s11661-997-0268-2 ↗
7. H. Kou, W. Li, J. Ma, J. Shao, Y. Tao, X. Zhang, P. Geng, Y. Deng, Y. Li, X. Zhang, and F. Peng: Int. J. Mech. Sci., 2018, vol. 140, pp. 83–92.10.1016/j.ijmecsci.2018.02.042 ↗
8. M. Pröbstle, S. Neumeier, P. Feldner, R. Rettig, H.E. Helmer, R.F. Singer, and M. Göken: Mater. Sci. Eng. A., 2016, vol. 676, pp. 411–20.10.1016/j.msea.2016.08.121 ↗
9. A.J. Ardell: Metall. Trans. A., 1985, vol. 16A(12), pp. 2131–65.10.1007/BF02670416 ↗
10. J.W. Martin: Precipitation Hardening: Theory and Applications, Butterworth-Heinemann, Oxford, 2012.
11. W. Hüther and B. Reppich: Int. J. Mater. Res., 1978, vol. 69(10), pp. 628–34.10.1515/ijmr-1978-691003 ↗
12. B. Reppich: Act Metall., 1982, vol. 30(1), pp. 87–94.10.1016/0001-6160(82)90048-7 ↗
13. B. Reppich and P.G. ScheppWehner: Acta Metall., 1982, vol. 30(1), pp. 95–104.10.1016/0001-6160(82)90049-9 ↗
14. R.W. Kozar, A. Suzuki, W.W. Milligan, J.J. Schirra, M.F. Savage, and T.M. Pollock: Metall. Trans. A., 2009, vol. 40, pp. 1588–1603.10.1007/s11661-009-9858-5 ↗
15. E.I. Galindo-Nava, L.D. Connor, and C.M.F. Rae: Acta Mater., 2015, vol. 98, pp. 377–90.10.1016/j.actamat.2015.07.048 ↗
16. T.A. Parthasarathy, S.I. Rao, and D.M. Dimiduk: Superalloys., 2004, vol. 10, pp. 887–96.10.7449/2004/Superalloys_2004_887_896 ↗
17. A.K. Jena and M.C. Chaturvedi: J. Mater. Sci., 1984, vol. 19, pp. 3121–39.10.1007/BF00549796 ↗
18. G.D. Smith and S.J. Patel: Superalloys., 2005, vol. 718, pp. 625–706.
19. M.V. Nathal and L.J. Ebert: Metall. Trans. A., 1985, vol. 16A, pp. 1863–70.10.1007/BF02670373 ↗
20. L. Zheng, G. Zhang, T.L. Lee, M.J. Gorley, Y. Wang, C. Xiao, and Z. Li: Mater. Des., 2014, vol. 61, pp. 61–69.10.1016/j.matdes.2014.04.055 ↗
21. C.Z. Zhu, R. Zhang, C.Y. Cui, Y.Z. Zhou, Y. Yuan, Z.S. Yu, X. Liu, and X.F. Sun: Metall. Mater. Trans. A., 2021, vol. 52A(1), pp. 108–18.10.1007/s11661-020-06081-9 ↗
22. A.J. Goodfellow, E.I. Galindo-Nava, C. Schwalbe, and H.J. Stone: Mater. Des., 2019, vol. 173, p. 107760.10.1016/j.matdes.2019.107760 ↗
23. S. Antonov, M. Detrois, R.C. Helmink, and S. Tin: J. Alloys Compd., 2015, vol. 626, pp. 76–86.10.1016/j.jallcom.2014.11.155 ↗
24. Z. Bi, M. Zhang, J. Dong, K. Luo, and J. Wang: Mater. Sci. Eng. A., 2010, vol. 527(16–17), pp. 4373–82.10.1016/j.msea.2010.03.075 ↗
25. M. Gao, D.G. Harlow, R.P. Wei, and S. Chen: Metall. Mater. Trans. A., 1996, vol. 27A, pp. 3391–98.10.1007/BF02595432 ↗
26. J.P. Collier, S.H. Wong, J.K. Tien, and J.C. Phillips: Metall. Trans. A., 1988, vol. 19(7), pp. 1657–66.10.1007/BF02645133 ↗
27. M. Anderson, A.L. Thielin, F. Bridier, P. Bocher, and J. Savoie: Mater. Sci. Eng. A., 2017, vol. 679, pp. 48–55.10.1016/j.msea.2016.09.114 ↗
28. X. Xie, G. Wang, J. Dong, C. Xu, W.-D. Cao, and R. Kennedy: Superalloys., 2015, vol. 718, pp. 625–706.
29. W.D. Cao and R. Kennedy: Superalloys., 2004, vol. 2004, pp. 91–99.10.7449/2004/Superalloys_2004_91_99 ↗
30. B. Hassan and J. Corney: Mater. Sci. Technol., 2017, vol. 33, pp. 1879–89.10.1080/02670836.2017.1333222 ↗
31. X. Xie, J. Dong, G. Wang, W. You, J. Du, C. Zhao, Z. Wang, and E. Loria: Superalloys., 2005, vol. 718, pp. 625–706.
32. M.J. Wang Du, Q. Deng, Z. Tian, and J. Zhu: J. Alloys Compd., 2017, vol. 701, pp. 635–44.10.1016/j.jallcom.2017.01.145 ↗
33. L. Finet, V.A. Esin, and V.L. MaurelNazé: Superalloys., 2020, vol. 2020, pp. 112–21.
34. O.M. Messé, J.S. Barnard, E.J. Pickering, P.A. Midgley, and C.M.F. Rae: Philos. Mag., 2014, vol. 94(10), pp. 1132–52.10.1080/14786435.2013.878052 ↗
35. K.V. Vamsi, S. Karthikeyan: MATEC Web of Conferences, vol. 14, p. 11005, EDP Sciences, 2014.10.1051/matecconf/20141411005 ↗
36. C. Booth-Morrison, R.D. Noebe, and D.N. Seidman: Acta Mater., 2009, vol. 57(3), pp. 909–20.10.1016/j.actamat.2008.10.029 ↗
37. C. Yan, L. Zhengdong, A. Godfrey, L. Wei, and W. Yuqing: Mater. Sci. Eng. A., 2014, vol. 589, pp. 153–64.10.1016/j.msea.2013.09.076 ↗
38. C. Joseph, C. Persson, and M.H. Colliander: Mater. Sci. Eng. A., 2017, vol. 679, pp. 520–30.10.1016/j.msea.2016.10.048 ↗
39. L.M. Pike: Turbo Expo: Power for Land, Sea, and Air. American Society of Mechanical Engineers, vol. 42398, pp. 1031–39, 2006.
40. G.U.O. Yan, T.-J. Li, C.-X. Wang, S.-F. Hou, and B.-H. Wang: Trans. Nonferr. Met. Soc. China., 2016, vol. 26(6), pp. 1598–1606.10.1016/S1003-6326(16)64266-8 ↗
41. Y. Mishima, S. Ochiai, N. Hamao, M. Yodogawa, and T. Suzuki: Trans. Jpn. Inst. Met., 1986, vol. 27(9), pp. 656–64.10.2320/matertrans1960.27.656 ↗
42. C.C. Clickner, J.W. Ekin, N. Cheggour, C.L.H. Thieme, Y. Qiao, Y.-Y. Xie, and A. Goyal: Cryogenics., 2006, vol. 46(6), pp. 432–38.10.1016/j.cryogenics.2006.01.014 ↗
43. E.M. Schulson, T.P. Weihs, D.V. Viens, and I. Baker: Acta Metall., 1985, vol. 33(9), pp. 1587–91.10.1016/0001-6160(85)90152-X ↗
44. E.O. Hall: Proceedings of the Physical Society. Section B, 1951, vol. 64, no. 9, p. 747.10.1088/0370-1301/64/9/303 ↗
45. A. Kelly: Strengthening Methods in Crystals, Elsevier, Amsterdam, 1971.
46. M. Walbrühl, D. Linder, J. Ågren, and A. Borgenstam: Mater. Sci. Eng. A., 2017, vol. 700, pp. 301–11.10.1016/j.msea.2017.06.001 ↗
47. R. Cozar and A. Pineau: Metall. Trans., 1973, vol. 4(1), pp. 47–59.10.1007/BF02649604 ↗
48. D.M. Collins and H.J. Stone: Int. J. Plast., 2014, vol. 54, pp. 96–112.10.1016/j.ijplas.2013.08.009 ↗
49. C.L. Fu, R. Reed, A. Janotti, and M. Krcmar: Superalloys, 2004, pp. 867–76.