journal article·2022-06

Evidence of Homogeneous Microstructures in Ti6Al4V Alloy During Shear Deformation

R. Vinjamuri, B. D. Bishoyi, R. K. Sabat, M. Kumar, S. K. Sahoo

Publisher page

Abstract

Free-end torsion tests were conducted for Ti6Al4V (Ti64) alloy at temperatures of 298 K, 673 K, and 873 K for different strains ranging from 0.22 to 0.99. The microstructure and texture evolution as a function of torsional deformation have been investigated in the present study. A near-equiaxed homogeneous microstructure was observed after deformation at all temperatures. However, the grains were observed to be aligned along the direction of shear stress at larger deformation strains. Dynamically recrystallized (DRX) grains were observed in the samples at higher deformation temperatures, and these were found to be significant at 873 K for strains > 0.66. Dynamic transformation of α → β was also observed during deformation at a temperature of 873 K. The initial fiber texture got rotated toward the ideal B fiber orientation, and reached at the ideal C2 fiber orientation after deformation for a maximum strain of 0.99. The deformation texture was further simulated through the Visco plastic self-consistent (VPSC) method, and it was found that the basal slip was the dominant deformation mode followed by prismatic and both pyramidal I and II slip systems. The flow stress decreased with increase in the temperature of deformation, and a significant flow softening was observed during deformation at 873 K.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. R.R. Boyer: Mater. Sci. Eng. A, 1996, vol. 213, pp. 103–14.10.1016/0921-5093(96)10233-1 ↗
2. I. Inagaki, Report No. 106, Nippon Steel & Sumitomo Metal, Osaka city, Technical Report, July 2014.
3. C. Leyens and M. Peters: Titanium and Titanium Alloys: Fundamentals and Applications, Wiley-VCH, Weinheim, 2003.10.1002/3527602119 ↗
4. B.D. Bishoyi, R.K. Sabat, J. Sahu, and S.K. Sahoo: Mater. Sci. Eng. A, 2017, vol. 703, pp. 399–12.10.1016/j.msea.2017.07.081 ↗
5. Y. Fan, W. Tian, Y. Guo, Z. Sun, and J. Xu: Adv. Mater. Sci. Eng., 2016, vol. 2016, pp. 1–10.
6. S.V. Zherebtsov, E.A. Kudryavtsev, G.A. Salishchev, B.B. Straumal, and S.L. Semiatin: Acta Mater., 2016, vol. 121, pp. 152–63.10.1016/j.actamat.2016.09.003 ↗
7. J. Zhang, H. Li, and M. Zhan: Manuf. Rev., 2020, vol. 7, pp. 1–14.
8. I. Weiss, F.H. Froes, D. Eylon, and G.E. Welsch: Metall. Trans. A, 1986, vol. 17, pp. 1935–47.10.1007/BF02644991 ↗
9. T. Seshacharyulu, S.C. Medeiros, W.G. Frazier, and Y.V.R.K. Prasad: Mater. Sci. Eng. A, 2002, vol. 325, pp. 112–25.10.1016/S0921-5093(01)01448-4 ↗
10. J. Gil Sevillano, P. Van Houtte, and E. Aernoudt: Prog. Mater. Sci., 1981, vol. 25, pp. 69–134.10.1016/0079-6425(80)90001-8 ↗
11. S.C. Shrivastava, J.J. Jonas, and G. Canova: J. Mech. Phys. Solids, 1982, vol. 30, pp. 75–90.10.1016/0022-5096(82)90014-X ↗
12. F. Montheillet, M. Cohen, and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 2077–89.10.1016/0001-6160(84)90187-1 ↗
13. T. Pettersen and E. Nes: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2727–36.10.1007/s11661-003-0174-1 ↗
14. E. Cakmak, H. Choo, K. An, and Y. Ren: Acta. Mater., 2012, vol. 60, pp. 6703–13.10.1016/j.actamat.2012.08.040 ↗
15. L.S. Tóth, J.J. Jonas, D. Daniel, and J.A. Bailey: Textures Microstruct., 1992, vol. 19, pp. 245–62.10.1155/TSM.19.245 ↗
16. P. Sanchez, A. Pochettino, T. Chauveau, and B. Bacroix: J. Nucl. Mater., 2001, vol. 298, pp. 329–39.10.1016/S0022-3115(01)00640-7 ↗
17. S. Biswas, B. Beausir, L.S. Toth, and S. Suwas: Acta Mater., 2013, vol. 61, pp. 5263–77.10.1016/j.actamat.2013.05.018 ↗
18. H. Xiao, Z. Yang, J. Li, and Y. Wan: Materials., 2021, vol. 14, p. 2067.10.3390/ma14082067 ↗
19. H. Chen, B. Song, N. Guo, T. Liu, T. Zhou, and J. He: Met. Mater. Int., 2019, vol. 25, pp. 147–58.10.1007/s12540-018-0177-5 ↗
20. X.Q. Guo, W. Wu, P.D. Wu, H. Qiao, K. An, and P.K. Liaw: Scr. Mater., 2013, vol. 69, pp. 319–22.10.1016/j.scriptamat.2013.05.010 ↗
21. B. Beausir, L.S. Tóth, F. Qods, and K.W. Neal: J. Eng. Mater. Technol., 2009, vol. 131, pp. 0111081–01110815.10.1115/1.3030973 ↗
22. N.P. Gurao and S. Suwas: Mater. Sci. Forum., 2012, vol. 702, pp. 826–9.
23. S. Balasubramanian and L. Anand: Acta Mater., 2002, vol. 50, pp. 133–48.10.1016/S1359-6454(01)00326-3 ↗
24. ***
25. H. Chen, F. Li, J. Liu, J. Li, X. Ma, and Q. Wan: Metall. Mater. Trans. A, 2017, vol. 48, pp. 2396–409.10.1007/s11661-017-4034-9 ↗
26. B. Beausir, L.S. Tóth, and K.W. Neale: Acta Mater., 2007, vol. 55, pp. 2695–705.10.1016/j.actamat.2006.12.021 ↗
27. B. Guo, S.L. Semiatin, J.J. Jonas, and S. Yue: J. Mater. Sci., 2018, vol. 53, pp. 9305–15.10.1007/s10853-018-2237-0 ↗
28. B. Guo, C. Aranas, A. Foul, X. Ji, A. Fall, M. Jahazi, and J.J. Jonas: Mater. Sci. Eng. A, 2018, vol. 729, pp. 119–24.10.1016/j.msea.2018.05.058 ↗
29. C.N. Tome and R.A. Lebensohn: VPSC Manual for Code Version 7c, National Laboratory L.A, 2010.
30. S. Zaefferer: Mater. Sci. Eng. A, 2003, vol. 344, pp. 20–30.10.1016/S0921-5093(02)00421-5 ↗
31. G.R. Canova, U.F. Kocks, and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 211–26.10.1016/0001-6160(84)90050-6 ↗
32. G. Lutjering and J. Williams: in: Titanium, 2nd ed. Springer, New York, 2007.
33. J. Galan-Lopez, S. Naghdy, P. Verleysen, L. Kestens, F. Coghe, L. Rabet, and J. Degrieck: IOP Conf. Ser.: Mater. Sci. Eng., 2015, vol. 82, pp. 233–345.10.1088/1757-899X/82/1/012027 ↗
34. M. Paghandeh, A. Zarei-Hanzaki, H.R. Abedi, Y. Vahidshad, J. Kawalko, D. Dietrich, and T. Lampke: J. Mater. Res. Technol., 2021, vol. 10, pp. 1291–300.10.1016/j.jmrt.2020.12.110 ↗
35. R. K. Sabat, M.V.S.S.D.S.S. Pavan, D. S. Aakash, M. Kumar, and S. K. Sahoo: Philos. Mag., 2018, vol. 98, pp. 2562–2581.10.1080/14786435.2018.1493237 ↗
36. A. Nadai: Theory of Flow and Fracture, McGraw-Hill, New York, 1950.
37. E.I. Poliak and J.J. Jonas: Acta Mater., 1996, vol. 44, pp. 127–36.10.1016/1359-6454(95)00146-7 ↗
38. T. Seshacharyulu, S.C. Medeiros, J.T. Morgan, J.C. Malas, W.G. Frazier, and Y.V.R.K. Prasad: Scr. Mater., 1999, vol. 41, pp. 283–8.10.1016/S1359-6462(99)00163-3 ↗
39. Y.V.R.K. Prasad and T. Seshacharyulu: Int. Mater. Rev., 1998, vol. 43, pp. 243–58.10.1179/imr.1998.43.6.243 ↗
40. T. Furuhara, B. Poorganji, H. Abe, and T. Maki: JOM., 2007, vol. 59, pp. 64–7.10.1007/s11837-007-0013-8 ↗
41. L. Jin, D. Lin, D. Mao, X. Zeng, B. Chen, and W. Ding: Mater. Sci. Eng. A, 2006, vol. 423, pp. 247–52.10.1016/j.msea.2006.02.045 ↗
42. T. Zhang, Y. Liu, D.G. Sanders, B. Liu, W. Zhang, and C. Zhou: Mater. Sci. Eng. A, 2014, vol. 608, pp. 265–72.10.1016/j.msea.2014.04.098 ↗
43. H.S. Yang, G. Gurewitz, and A.K. Mukherjee: Mater. Trans. IIM, 1991, vol. 32, pp. 465–72.10.2320/matertrans1989.32.465 ↗
44. R. Ding, Z.X. Guo, and A. Wilson: Mater. Sci. Eng. A, 2002, vol. 327, pp. 233–45.10.1016/S0921-5093(01)01531-3 ↗
45. H. Matsumoto, K. Yoshida, S.H. Lee, Y. Ono, and A. Chiba: Mater. Lett., 2013, vol. 98, pp. 209–12.10.1016/j.matlet.2013.02.033 ↗
46. K. Wang, G. Liu, W. Tao, J. Zhao, and K. Huang: Mater. Charact., 2017, vol. 126, pp. 57–63.10.1016/j.matchar.2017.01.030 ↗
47. X. Ji, B. Guo, F. Jiang, H. Yu, D. Fu, J. Teng, H. Zhang, and J.J. Jonas: J. Mater. Sci. Technol., 2020, vol. 36, pp. 160–6.10.1016/j.jmst.2019.08.005 ↗
48. N. Stanford and P.S. Bate: Acta Mater., 2004, vol. 52, pp. 5215–24.10.1016/j.actamat.2004.07.034 ↗
49. D. Bhattacharyya, G.B. Viswanathan, R. Denkenberger, D. Furrer, and H.L. Fraser: Acta Mater., 2003, vol. 51, pp. 4679–91.10.1016/S1359-6454(03)00179-4 ↗
50. I.J. Beyerlein, R.A. Lebensohn, and C.N. Tomé: Mater. Sci. Eng. A, 2003, vol. 345, pp. 122–38.10.1016/S0921-5093(02)00457-4 ↗
51. G.G. Yapici and I. Karaman: Mater. Sci. Eng. A, 2009, vol. 503, pp. 78–81.10.1016/j.msea.2008.01.098 ↗
52. S. Suwas, B. Beausir, L.S. Tóth, J.J. Fundenberger: Acta Mater. 2011, 59:1121–1133.10.1016/j.actamat.2010.10.045 ↗
53. H. Li: Analysis of the deformation behavior of the hexagonal close packed alpha phase in titanium and titanium alloys, Doctoral dissertation, Michigan State University, United States, 2013.