Hybrid Electron Beam Powder Bed Fusion Additive Manufacturing of Ti–6Al–4V: Processing, Microstructure, and Mechanical Properties
Source abstract
Abstract
Abstract Processing, microstructure, and mechanical properties of the hybrid electron beam powder bed fusion (E-PBF) additive manufacturing of Ti–6Al–4V have been investigated. We explore the possibility of integrating the substrate as a part of the final component as a repair, integrated, or consolidated part. Various starting plate surface conditions are used to understand the joining behavior and their microstructural properties in the bonding region between the plate and initial deposited layers. It is found that mechanical failures mainly occur within the substrate region due to the dominant plastic strains localized in the weaker Ti–6Al–4V substrate. The hybrid concept is successfully proven with satisfactory bonding performance between the E-PBF build and substrate. This investigation improves the practice of using the hybrid E-PBF additive manufacturing technique and provides basic understanding to this approach.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. K.A. Lorenz, J.B. Jones, D.I. Wimpenny, and M.R. Jackson: Solid Free. Fabr., 2015, vol. 53, pp. 96–108.
2. A. Hinojos, J. Mireles, A. Reichardt, P. Frigola, P. Hosemann, L.E. Murr, and R.B. Wicker: Mater. Des., 2016, vol. 94, pp. 17–27.10.1016/j.matdes.2016.01.041 ↗
3. P. Kürnsteiner, M.B. Wilms, A. Weisheit, P. Barriobero-Vila, B. Gault, E.A. Jägle, and D. Raabe: Microsc. Microanal., 2017, vol. 23, pp. 694–5.10.1017/S1431927617004135 ↗
4. M. Simonelli, D.G. McCartney, P. Barriobero-Vila, N.T. Aboulkhair, Y.Y. Tse, A. Clare, and R. Hague: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 2444–59.10.1007/s11661-020-05692-6 ↗
5. X. Shia, S. Maa, C. Liua, Q. Wua, J. Lua, Y. Liub, and W. Shib: Mater. Sci. Eng. A., 2017, vol. 684, pp. 196–204.10.1016/j.msea.2016.12.065 ↗
6. M. Merklein, D. Junker, A. Schaub, and F. Neubauer: Phys. Procedia., 2016, vol. 83, pp. 549–59.10.1016/j.phpro.2016.08.057 ↗
7. F. Scherillo, M. Liberini, A. Astarita, S. Franchitti, C. Pirozzi, R. Borrelli, P. Cirillo, A. Caraviello, A. Squillace, and L. Carrino: Procedia Eng., 2017, vol. 183, pp. 264–9.10.1016/j.proeng.2017.04.034 ↗
8. L. Portolés, O. Jordá, L. Jordá, A. Uriondo, M. Esperon-Miguez, and S. Perinpanayagam: J. Manuf. Syst., 2016, vol. 41, pp. 65–75.10.1016/j.jmsy.2016.07.002 ↗
9. C.A. Terrazas, S.M. Gaytan, E. Rogriguez, D. Espalin, L.E. Murr, F. Medina, and R.B. Wicker: Adv. Manuf. Technol., 2014, vol. 71, pp. 33–45.10.1007/s00170-013-5449-0 ↗
10. M.S. Hossain, J.A. Gonzalez, R.M. Hernandez, M.A.I. Shuvo, J. Mireles, A. Choudhuri, and Y. Lin: Addit. Manuf., 2016, vol. 10, pp. 58–66.
11. G. Mandil, V.T. Le, H. Paris, and M. Suard: Int. J. Adv. Manuf. Technol., 2016, vol. 85(5), pp. 1835–46.10.1007/s00170-015-8049-3 ↗
12. M. Galati and L. Iuliano: Addit. Manuf., 2018, vol. 19, pp. 1–20.
13. T. Scharowsky, V. Juechter, R.F. Singer, and C. Korner: Adv. Eng. Mater., 2017, vol. 17(11), pp. 1573–8.10.1002/adem.201400542 ↗
14. X. Wang, X. Gong, and K. Chou: Procedia Manuf., 2015, vol. 1, pp. 278–95.
15. A. Sidambe: Met. Powder Rep., 2017, vol. 72(3), pp. 200–8.10.1016/j.mprp.2017.02.003 ↗
16. V. Weißmann, P. Drescher, R. Bader, H. Seitz, H. Hansmann, and N. Laufer: Metals., 2017, vol. 7(91), pp. 1–22.
17. Liu, R. Wildman, C. Tuck, I. Ashcroft, and R. Hague: in Solid Freeform Fabrication Symposium, Austin, 2011, pp. 227–238.
18. F. Bahbou and U. Ackelid: in EBAM 2016, Nuremberg, 2016.
19. A. Antonysamya, J. Meyer, and P.B. Prangnellc: Mater. Charact., 2013, vol. 84, pp. 153–68.10.1016/j.matchar.2013.07.012 ↗
20. D. Herzog, V. Seyda, E. Wycisk, and C. Emmelmann: Acta Mater., 2016, vol. 117, pp. 371–92.10.1016/j.actamat.2016.07.019 ↗
21. X.P. Tan, Y. Kok, Y.J. Tan, M. Descoins, D. Mangelinck, S.B. Tor, K.F. Leong, and C.K. Chua: Acta Mater., 2015, vol. 97, pp. 1–16.10.1016/j.actamat.2015.06.036 ↗
22. J. Karlsson, A. Snis, H. Engqvist, and J. Lausmaa: J. Mater. Process. Technol., 2013, vol. 213, pp. 2019–118.10.1016/j.jmatprotec.2013.06.010 ↗
23. A. Mohammad, A.M. Alahmari, M.K. Mohammed, R.K. Renganayagalu, and K. Moiduddin: Materials., 2017, vol. 10(211), pp. 1–16.
24. S.S. Rocha, G.L. Abado, G.E. Henriques, and M.A. Nobilo: Braz. Dent. J., 2006, vol. 17(2), pp. 126–9.10.1590/S0103-64402006000200008 ↗
25. M. Yan, M.S. Dargusch, T. Ebel, and M. Qian: Acta Mater., 2014, vol. 68, pp. 196–206.10.1016/j.actamat.2014.01.015 ↗
26. ASTM F2924-14 (ASTM International, West Conshohocken, PA, 2014), www.astm.org. Accessed 28 Oct 2021
27. N. Hrabe and T. Quinn: Mater. Sci. Eng. A., 2013, vol. 573, pp. 264–70.10.1016/j.msea.2013.02.064 ↗
28. X. Shui, K. Yamanaka, M. Mori, Y. Nagata, K. Kurita, and A. Chiba: Mater. Sci. Eng. A., 2017, vol. 680, pp. 239–48.10.1016/j.msea.2016.10.059 ↗
29. B. Dutta and F.H. Froes: Met. Powder Rep., 2017, vol. 72(2), pp. 96–106.10.1016/j.mprp.2016.12.062 ↗
30. C. Qiu, G.A. Ravi, and M. Attallah: Mater. Des., 2015, vol. 81, pp. 21–30.10.1016/j.matdes.2015.05.031 ↗
31. P. Wang, P.M. Ling, S. Nai, and S. Lu: Miner. Met. Mater. Soc., 2017, vol. 69(12), pp. 2738–44.10.1007/s11837-017-2610-5 ↗
32. K. Zhang: PhD Dissertation, University of Brimingham, 2010