journal article·2022-03Open access

Modeling and Simulation of Pore Formation in a Bainitic Steel During Creep

Felix Meixner, Mohammad Reza Ahmadi, Christof Sommitsch

Abstract

Abstract In the field of power engineering, where materials are subjected to high pressures at elevated temperatures for many decades, creep-resistant steels are put to work. Their service life is still, however, finite, as the many changes in their microstructure can merely be mitigated and not avoided. Creep cavitation is one of those changes and, in many cases, ultimately causes failure by rupture. In this work, a model is proposed to simulate the nucleation and growth of cavities during creep. This exclusively physics-based model uses modified forms of Classical Nucleation Theory and the Onsager Extremum Principle in a newly developed Kampmann–Wagner framework. The model is validated on P23 steel which underwent creep rupture experiments at 600 °C and stresses of 50, 70, 80, 90 and 100 MPa for creep times up to 46000 hours. The model predicts qualitatively the shape and prevalence of cavities at different sites in the microstructure, and quantitatively the number density, size of cavities and their phase fraction contributing to a reduction in density. Finally, we find good agreement between the simulation and the experimental results especially at low stresses and longer creep times.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. R. Viswanathan and W. Bakker: J. Mater. Eng. Perform., 2001, vol. 10, pp. 81–95.10.1361/105994901770345394 ↗
2. J.A. Jiménez, M. Carsí, and O.A. Ruano: J. Mater. Sci. Technol., 2017, vol. 33, pp. 1487–93.10.1016/j.jmst.2017.08.001 ↗
3. P. von Hartrott, S. Holmström, S. Caminada, and S. Pillot: Mater. Sci. Eng. A., 2009, vol. 510–511, pp. 175–9.10.1016/j.msea.2008.04.117 ↗
4. M.F. Ashby: Advances in Applied Mechanics, vol. 23, Academic Press, New York, 1983, pp. 117–77.10.1016/S0065-2156(08)70243-6 ↗
5. J. Hald: Trans. Indian Inst. Met., 2016, vol. 69, pp. 183–8.10.1007/s12666-015-0793-4 ↗
6. A.J. Perry: J. Mater. Sci., 1974, vol. 9, pp. 1016–39.10.1007/BF00570398 ↗
7. M.E. Kassner and T.A. Hayes: Int. J. Plasticity., 2003, vol. 19, pp. 1715–48.10.1016/S0749-6419(02)00111-0 ↗
8. M.E. Kassner and M.T. Pérez-Prado: Fundamentals of Creep in Metals and Alloys, Elsevier, 2015.10.1016/B978-0-08-099427-7.00001-3 ↗
9. J. He and R. Sandström: Theor. Appl. Fract. Mech., 2017, vol. 89, pp. 139–46.10.1016/j.tafmec.2017.02.004 ↗
10. B.F. Dyson: Scr. Metall., 1983, vol. 17, pp. 31–7.10.1016/0036-9748(83)90065-0 ↗
11. L. Huang, M. Sauzay, Y. Cui, and P. Bonnaille: Mater. Sci. Eng. A, 2021, vol. 813, p. 140953.10.1016/j.msea.2021.140953 ↗
12. M.R. Ahmadi, B. Sonderegger, S.D. Yadav, and C. Poletti: Mater. Sci. Eng. A., 2018, vol. 712, pp. 466–77.10.1016/j.msea.2017.12.010 ↗
13. R. Raj and M.F. Ashby: Acta Metall., 1975, vol. 23, pp. 653–66.10.1016/0001-6160(75)90047-4 ↗
14. D.L.C. Neves, J.R. de C. Seixas, E.B. Tinoco, A. da C. Rocha, and I. de C. Abud: Mater. Res., 2004, vol. 7, pp. 155–61.10.1590/S1516-14392004000100021 ↗
15. A.C.F. Cocks and M.F. Ashby: Met. Sci., 1980, vol. 14, pp. 395–402.10.1179/030634580790441187 ↗
16. W. Bendick, J. Gabrel, B. Hahn, and B. Vandenberghe: Int. J. Press. Vessel. Pip., 2007, vol. 84, pp. 13–20.10.1016/j.ijpvp.2006.09.002 ↗
17. J.A. Siefert and J.D. Parker: Int. J. Press. Vessel. Pip., 2016, vol. 138, pp. 31–44.10.1016/j.ijpvp.2016.02.018 ↗
18. J.C. Vaillant, B. Vandenberghe, B. Hahn, H. Heuser, and C. Jochum: Int. J. Press. Vessel. Pip., 2008, vol. 85, pp. 38–46.10.1016/j.ijpvp.2007.06.011 ↗
19. P. Mayr: Diploma Thesis, Graz University of Technology, 2003.
20. M. Sroka and A. Zieliński: Arch. Mater. Sci. Eng., 2013, vol. 64, pp. 205–12.
21. M. Volmer and Α Weber: Z. Phys. Chem., 1926, vol. 119U, pp. 277–301.10.1515/zpch-1926-11927 ↗
22. R. Becker and W. Doring: Ann. Phys., 1935, vol. 416, pp. 719–52.10.1002/andp.19354160806 ↗
23. J. Frenkel: J. Chem. Phys., 1939, vol. 7, pp. 538–47.10.1063/1.1750484 ↗
24. Y.B. Zeldovich and R. Sunyaev: in Selected Works of Yakov Borisovich Zeldovich, Volume I, Princeton University Press, Princeton, 1992, pp. 120–37.10.1515/9781400862979 ↗
25. D.W. Oxtoby: J. Phys. Condens. Matter., 1992, vol. 4, pp. 7627–50.10.1088/0953-8984/4/38/001 ↗
26. V.V. Slezov and J. Schmelzer: J. Phys. Chem. Solids., 1994, vol. 55, pp. 243–51.10.1016/0022-3697(94)90139-2 ↗
27. J. Feder, K.C. Russell, J. Lothe, and G.M. Pound: Adv. Phys., 1966, vol. 15, pp. 111–78.10.1080/00018736600101264 ↗
28. E. Kozeschnik: Modeling Solid-State Precipitation, Momentum Press, New York, 2012.10.5643/9781606500644 ↗
29. J. Svoboda, F.D. Fischer, P. Fratzl, and E. Kozeschnik: Mater. Sci. Eng. A., 2004, vol. 385, pp. 166–74.
30. E. Kozeschinik: Matcalc, www.matcalc.at.
31. B.M. Clemens, W.D. Nix, and R.J. Gleixner: J. Mater. Res., 1997, vol. 12, pp. 2038–42.10.1557/JMR.1997.0273 ↗
32. R.J. Gleixner, B.M. Clemens, and W.D. Nix: J. Mater. Res., 1997, vol. 12, pp. 2081–90.10.1557/JMR.1997.0279 ↗
33. H. Riedel: Fracture at High Temperatures, Springer, Berlin, 1987.10.1007/978-3-642-82961-1 ↗
34. J. Čadek: Creep in Metallic Materials, Elsevier, Amsterdam, 1988.
35. J.P. Hirth and W.D. Nix: Acta Metall., 1985, vol. 33, pp. 359–68.10.1016/0001-6160(85)90078-1 ↗
36. J.K. Lee and H. Aaronson: Acta Metall., 1975, vol. 23, pp. 809–20.10.1016/0001-6160(75)90197-2 ↗
37. P.J. Clemm and J.C. Fisher: Acta Metall., 1955, vol. 3, pp. 70–3.10.1016/0001-6160(55)90014-6 ↗
38. L. Onsager: Phys. Rev., 1931, vol. 37, pp. 405–26.10.1103/PhysRev.37.405 ↗
39. R. Wagner, R. Kampmann, and P.W. Voorhees: in Phase Transformations in Metals, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2013, pp. 309–407.
40. W.D. Nix, J.C. Earthman, G. Eggeler, and B. Ilschner: Acta Metall., 1989, vol. 37, pp. 1067–77.10.1016/0001-6160(89)90103-X ↗
41. S. Schönecker, X. Li, B. Johansson, S.K. Kwon, and L. Vitos: Sci. Rep., 2015, vol. 5, pp. 1–7.10.1038/srep14860 ↗
42. G.C. Benson and R. Shuttleworth: J. Chem. Phys., 1951, vol. 19, pp. 130–1.10.1063/1.1747963 ↗
43. B. Sonderegger and E. Kozeschnik: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2009, vol. 40, pp. 499–510.10.1007/s11661-008-9752-6 ↗
44. T.A. Roth: Mater. Sci. Eng., 1975, vol. 18, pp. 183–92.10.1016/0025-5416(75)90168-8 ↗
45. M.I. Szynkowska: in Encyclopedia of Analytical Science, Elsevier, 2005, pp. 134–43.10.1016/B0-12-369397-7/00385-X ↗
46. S.D. Yadav, B. Sonderegger, B. Sartory, C. Sommitsch, and C. Poletti: Mater. Sci. Technol. (U. K.)., 2015, vol. 31, pp. 554–64.10.1179/1743284714Y.0000000635 ↗
47. H. Jazaeri, P.J. Bouchard, M.T. Hutchings, M.W. Spindler, A.A. Mamun, and R.K. Heenan: Metals (Basel), https://doi.org/10.3390/met9030318.10.3390/met9030318 ↗
48. A. Inoue, H. Nitta, and Y. Iijima: Acta Mater., 2007, vol. 55, pp. 5910–6.10.1016/j.actamat.2007.06.041 ↗
49. D. Prokoshkina, V.A. Esin, G. Wilde, and S.V. Divinski: Acta Mater., 2013, vol. 61, pp. 5188–97.10.1016/j.actamat.2013.05.010 ↗
50. H. Beladi and G.S. Rohrer: Acta Mater., 2013, vol. 61, pp. 1404–12.10.1016/j.actamat.2012.11.017 ↗
51. S.M. Kim and W.J.L. Buyers: J. Phys. F Met. Phys., 1978, vol. 8, pp. 103–8.10.1088/0305-4608/8/5/001 ↗
52. J.W. Arblaster: Selected Values of the Crystallographic Properties of Elements, ASM International, Materials Park, 2018.
53. R.D. Doherty: Physical Metallurgy, Elsevier, Amsterdam, 1996, p. 2740.
54. S. Zhang, H. Fang, M.E. Gramsma, C. Kwakernaak, W.G. Sloof, F.D. Tichelaar, M. Kuzmina, M. Herbig, D. Raabe, E. Brück, S. van der Zwaag, and N.H. van Dijk: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2016, vol. 47, pp. 4831–44.10.1007/s11661-016-3642-0 ↗
55. H. Fang, N. Szymanski, C.D. Versteylen, P. Cloetens, C. Kwakernaak, W.G. Sloof, F.D. Tichelaar, S. Balachandran, M. Herbig, E. Brück, S. van der Zwaag, and N.H. van Dijk: Acta Mater., 2019, vol. 166, pp. 531–42.10.1016/j.actamat.2019.01.014 ↗
56. O. Kapikranian, H. Zapolsky, C. Domain, R. Patte, C. Pareige, B. Radiguet, and P. Pareige: Phys. Rev. B Condens. Matter Mater. Phys., 2014, vol. 89, pp. 1–8.10.1103/PhysRevB.89.014111 ↗
57. C.D. Versteylen, M.H.F. Sluiter, and N.H. van Dijk: J. Mater. Sci., 2018, vol. 53, pp. 14758–73.10.1007/s10853-018-2666-9 ↗