journal article·2021-12Open access

Influence of Sulfur Content on Penetration Depth in TIG Welding for High Manganese Stainless Steels

Yuji Kisaka, Satoshi Miki, Nobuo Sekiguchi, Fumiaki Kimura, Shinichi Tashiro, Manabu Tanaka, Shumpei Ozawa, Tomone Suwa, Yoshikazu Takahashi

Abstract

TIG welding of high manganese stainless steels was conducted with different sulfur contents of 5 and 20 ppm. The penetration depth of the welding bead clearly increased even when the sulfur content of the sample was only very slightly increased from 5 to 20 ppm. In situ observation of the surface of the molten pool revealed that the increase in penetration depth of the welding bead could be attributed to an elevation of the average temperature at the center of the molten pool from 2070 to 2200 K due to the generation of an inward fluid flow in the pool. The results of precise measurements of the surface tension of molten high manganese stainless steels using the electromagnetic levitation (EML) technique, thoroughly explained that the inward flow in the molten pool of the sample containing a sulfur content of 20 ppm was induced by Marangoni convection driven by the boomerang shape temperature dependence of the surface tension of the molten sample. The experimental results of the variations in the temperature distribution and the fluid flow direction in the molten pool depending on the sulfur content were reproduced well by a numerical calculation considering the four dominant driving forces of plasma jet, buoyancy, electromagnetic forces, and Marangoni convection, which indicated that the fluid flow direction was dominantly controlled by Marangoni convection.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Non-Destructive Testing Techniques · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. K. Hamada, Y. Nunoya, T. Isono, Y. Takahashi, K. Kawano, T. Saito, M. Oshikiri, Y. Uno, N. Koizumi, H. Nakajima, H. Matsuda, Y. Yano, A. Devred, P. Libeyre, D. Bessette, and M.C. Jewwel: IEEE Trans. Appl. Supercond., 2012, vol. 22(3), pp. 4203404–4203404.10.1109/TASC.2011.2176708 ↗
2. K. Hamada, Y. Takahashi, T. Suwa: TEION KOGAKU (Cryogenics and Superconductivity Society of Japan), 2019, Vol. 54, No. 6, pp. 437–44.(Japanese)10.2221/jcsj.54.437 ↗
3. T. Saito, K. Kawano, T. Yamazaki, H. Ozeki, T. Isono, K. Hamada, A. Devred, and A. Vostner: Phys. Procedia., 2015, vol. 67, pp. 1016–21.10.1016/j.phpro.2015.06.193 ↗
4. N. Sekiguchi, Y. Yano, Y. Kisaka, Y. Yoshimura, Y. Adachi, T. Yamaguchi: Nippon Steel & Sumikin Engineering Co., Ltd. technical review, 2019, Vol.10, pp. 10-19. (Japanese)
5. M. Vasudevan: J. Mater. Eng. Perform., 2017, vol. 26(3), pp. 1325–36.10.1007/s11665-017-2517-x ↗
6. S. Lu, H. Fujii, H. Sugiyama, M. Tanaka, and K. Nogi: Mater. Trans., 2002, vol. 43(11), pp. 2926–31.10.2320/matertrans.43.2926 ↗
7. H. Fujii, T. Sato, S. Lu, and K. Nogi: Mater. Sci. Eng., A., 2008, vol. 495, pp. 296–303.10.1016/j.msea.2007.10.116 ↗
8. D.K. Aidun and S.A. Martin: J. Mater. Eng. Perform., 1997, vol. 6(4), pp. 496–502.10.1007/s11665-997-0121-1 ↗
9. T. N. Le, Y. L. Lo: Mater. Des., 2019, Vol. 179, 107866.10.1016/j.matdes.2019.107866 ↗
10. M. Tanaka, S. Tashiro, T. Satoh, A.B. Murphy, and J.J. Lowke: Sci. Technol. Weld. Joining., 2008, vol. 13(3), pp. 225–31.10.1179/174329308X283929 ↗
11. P.R. Scheller: Steel Res.., 2001, vol. 72(3), pp. 76–80.10.1002/srin.200100087 ↗
12. K.C. Mills and B.J. Keene: Int. Mater. Rev., 1990, vol. 35(1), pp. 185–216.10.1179/095066090790323966 ↗
13. S.B. Mamat, S. Tashiro, M. Tanaka, M. Yusoff: Journal of Physics D: Applied Physics, 2018, Vol. 51, No. 13, 135206.10.1088/1361-6463/aab128 ↗
14. S. Ozawa, K. Morohoshi, T. Hibiya, H. Fukuyama: Journal of Applied Physics, 2010, Vol. 107, No. 1, 014910.10.1063/1.3275047 ↗
15. S. Ozawa, Y. Kawanobe, K. Kuribayashi, T. Nagasawa: International Journal of Microgravity Science and Application, 2016, No. 33, Vol. 2, 330214.
16. Lord. Rayleigh, Proc. R. Soc. London, 1879, Vol. 29, No. 71.10.1098/rspl.1879.0015 ↗
17. B.L. Cummings and D.A. Blackburn: J. Fluid Mech., 1991, vol. 224, pp. 395–416.10.1017/S0022112091001817 ↗
18. S. Ozawa, T. Koda, M. Adachi, K. Morohoshi, J. Watanabe, and T. Hibiya: Journal of Applied Physics, 2009, Vol. 106, 034907.10.1063/1.3190495 ↗
19. I. Egry, H. Giffard, and S. Schneider: Meas. Sci. Technol., 2005, vol. 16(2), pp. 426–31.10.1088/0957-0233/16/2/013 ↗
20. M. Beutl, G. Pottlacher, and H. Jäger: Int. J. Thermophys., 1994, vol. 15(6), pp. 1323–31.10.1007/BF01458840 ↗
21. S. Tashiro, S. Miki, A. B. Murphy, M. Tanaka, Y. Kisaka, F. Kimura, T. Suwa. Y. Takahashi: Plasma Chemistry and Plasma Processing, (under review)
22. ISO standard, 1995, Guide to the Expression of Uncertainty in measurement.