journal article·2021-07

In-Situ γ-γ′ Lattice Parameter Evolution and Tertiary Burst Phenomena During Controlled Cooling of Commercial PM Nickel-Base Superalloys

Nicholas J. Krutz, Yan Gao, Yang Ren, Ian Spinelli, Michael J. Mills

Publisher page

Abstract

The γ and γ′ lattice parameter evolution of two commercial powder metallurgy (PM) nickel-base superalloys, ME3 and Rene’88DT, during cooling from above the γ′ prime solvus temperature is characterized using in-situ synchrotron X-ray Diffraction (XRD). The peak intensity deconvolution necessary for quantifying misfit between the two phases from XRD is accomplished by combining direct observation of several superlattice peak positions with thermodynamic modeling to quantify the intensity relationship between the overlapping phases. The misfit values obtained from the XRD measurements are compared to Scanning Electron Microscopy (SEM) observations of γ′ precipitate shapes for a subset of the experimental conditions where it can be observed that the exposures that result in cuboidal precipitate shapes are associated with the highest degrees of relative misfit. Time-resolved observations of the on-cooling lattice parameter evolution suggest a potential direct observation of the tertiary γ′ burst events in the two compositions within both the (100) superlattice peak and the (311) fundamental peak. The onset temperatures for the tertiary γ′ burst events for ME3 and Rene’88DT compositions for the cooling rates examined were found to be approximately 925 °C and 815 °C, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. R.J. Mitchell, M.C Hardy, M. Preuss, S. Tin: Superalloys 2004, Proc. Int. Symp., 10th, pp. 361–70.10.7449/2004/Superalloys_2004_361_370 ↗
2. [2] A.R.P. Singh, S. Nag, S. Chattopadhyay, Y. Ren, J. Tiley, G.B. Viswanathan, H.L. Fraser, R. Banerjee: Acta Mater., 2013, 61(1), pp. 280-293.10.1016/j.actamat.2012.09.058 ↗
3. [3] M. Li, J. Coakley, D. Isheim, G. Tian, B. Shallock: J. Alloys Compd., 2018, 732, pp. 765-776.10.1016/j.jallcom.2017.10.263 ↗
4. [4] D.M. Collins, L. Yan, E.A. Marquis, L.D. Connor, J.J. Ciardiello, A.D. Evans, H.J. Stone: Acta Mater., 2013, 61(20), pp. 7791-7804.10.1016/j.actamat.2013.09.018 ↗
5. [5] X. Fan, A. Zhang, Z. Guo, X. Wang, J. Yang, J. Zou: JOM, 2019, 54(3), pp. 2680-2689
6. [6] F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, A. Devaux: Sci. Rep., 2016, 6(1), pp. 1-16.10.1038/srep28650 ↗
7. [7] C. Papadaki, W. Li, A.M. Korsunsky: Mater., 2018, 11(9), pp. 1528.10.3390/ma11091528 ↗
8. [8] P.S. Mathur, J.L. Bartos: USAAMRDL-TR-76-30, General Electric Company, Lynn, MA, May 1977.
9. S.T. Wlodek, M. Kelly, D.A. Alden: Superalloys 1996, Proc. Int. Symp., 8th, pp. 129–36.10.7449/1996/Superalloys_1996_129_136 ↗
10. T.P. Gabb, A. Garg, D.L. Ellis, and K. O’Conner: NASA Report, TM-2004-213066, 2004.
11. [11] S.L. Semiatin, F. Zhang, R. Larsen, L.A. Chapman, D.U. Furrer: Integr. Mater. Manuf. Innov., 2016, 5(1), pp. 41-60.10.1186/s40192-016-0046-3 ↗
12. J. Gayda, T.P. Gabb, P.T. Kantzos, D.U. Furrer: NASA Report, TM-2002-211558, 2002.
13. R.R. Unocic, L. Kovarik, C. Shen, P.M. Sarosi, Y. Wang, J. Li, M.J. Mills: Superalloys 2008, Proc. Int. Symp., 11th, pp. 377-385.10.7449/2008/Superalloys_2008_377_385 ↗
14. [14] A.J. Goodfellow, L.R. Owen, K.A. Christofidou, J. Kelleher, M.C. Hardy, H.J. Stone: Metals, 2019, 9(6), pp. 700.10.3390/met9060700 ↗
15. [15] M.V. Nathal, R.A. Mackay, R.G. Garlick: Mater. Sci. Eng., 1985, 75(1-2), pp. 195-205.10.1016/0025-5416(85)90189-2 ↗
16. T.M. Pollock, S. Tin (2006) J. Propul. Power 22(2):361-374.10.2514/1.18239 ↗
17. [17] J.S. Van Sluytman, T.M. Pollock: Acta Mater., 2012, 60(4), pp. 1771-1783.10.1016/j.actamat.2011.12.008 ↗
18. A. Wisniewski, J. Beddoes (2009) Mater. Sci. Eng. A, 510:266-272.10.1016/j.msea.2008.04.130 ↗
19. [19] S.L. Semiatin, S.L. Kim, F. Zhang, J.S. Tiley: Metall. Trans. A, 2015, 46(4), pp. 1715-1730.10.1007/s11661-015-2748-0 ↗
20. J. Mao, K. Chang, W. Yang, K. Ray, S. Vaze, D.U. Furrer: Metall. Trans. A, 2001, pp. 2441–52.10.1007/s11661-001-0034-9 ↗
21. T.P. Gabb, D.G. Backman, D.Y. Wei, D.P. Mourer, D. Furrer, A. Garg, D.L. Ellis: Superalloys 2000, Proc. Int. Symp., 9th, pp. 405–14.10.7449/2000/Superalloys_2000_405_414 ↗
22. [22] R.A. Ricks, A.J. Porter, R.C. Ecob: Acta Metall., 1983, 31(1), pp. 43-53.10.1016/0001-6160(83)90062-7 ↗
23. [23] Y.S. Yoo, D.Y. Yoon, A.M. Henry: Metals and Materials, 1995, 1(1), pp. 47-61.10.1007/BF03055324 ↗
24. A.G. Khachaturyan: Theory of Structural Transformations in Solids, Courier Corporation, Chelmsford, 2013.
25. [25] H.J. Stone, T.M. Holden, R.C. Reed: Acta Mater., 1999, 47(17), pp. 4435-4448.10.1016/S1359-6454(99)00314-6 ↗
26. [26] R.Y. Zhang, H.L. Qin, Z.N. Bi, J. Li, S. Paul, T.L. Lee: Metall. Trans. A, 2020, 51(4), pp. 1860-1873.10.1007/s11661-020-05627-1 ↗
27. [27] D. M. Collins, D.J. Crudden, E. Alabort, T. Connolley, R.C. Reed: Acta Mater., 2015, 94, pp. 244-256.10.1016/j.actamat.2015.04.046 ↗
28. [28] M.C. Hardy, M. Detrois, E.T. McDevitt, C. Argyrakis, V. Saraf, P.D. Jablonski, S. Tin: Metall. Trans. A, 2020, 51(6), pp. 2626-2650.10.1007/s11661-020-05773-6 ↗
29. D.P. Mourer, K.R. Bain, P.L. Reynolds, J.J. Shirra, and T.P. Gabb: European Patent Application EP1 195 446 A1, 2000.
30. T.P. Gabb, J. Gayda, D.F. Johnson, R.A. MacKay, R.B. Rogers, C.K. Sudbrack, A. Garg, I.E. Locci, S.L. Semiatin: NASA Report, 2016-218936, 2016.
31. J. Cormier: Superalloys 2016, Proc. Int. Symp., 13th, pp. 383–94.10.1002/9781119075646.ch42 ↗
32. A.P. Hammersley: ESRF Internal Report, ESRF97HA02T, 1997.
33. [33] A. P. Hammersley, S. O. Svensson, M. Hanfland, A. N. Fitch, and D. Häusermann: High Pressure Res., 1996, 14, pp. 235-248.10.1080/08957959608201408 ↗
34. [34] B.E. Warren: X-Ray Diffraction. Addison-Wesley, Massachusetts, 1969.
35. [35] B.D. Cullity, S.R. Stock: Elements of X-ray Diffraction, 3rd ed., Prentice Hall, New Jersey, 2001, pp. 348-355.
36. [36] J.O. Andersson, T. Helander, L. Höglund, P.F. Shi, B. Sundman: Calphad, 2002, 26, pp. 273-312.10.1016/S0364-5916(02)00037-8 ↗
37. T.P. Gabb, A. Garg, D.L. Ellis: NASA Report, TM-2004-213123, 2004.
38. G. Esteves, K. Ramos, C.M. Fancher, J.L. Jones: LIPRAS: Line-Profile Analysis Software, 2017. https://doi.org/10.13140/rg.2.2.29970.25282/3.10.13140/rg.2.2.29970.25282/3 ↗
39. D.A. Porter, K.E. Easterling, M.Y. Sherif: Phase Transformations in Metals and Alloys. 3rd ed., Taylor & Francis Group LLC, 2009.10.1201/9781439883570 ↗
40. C. Shen, Modeling Creep-Fatigue-Environment Interactions in Steam Turbine Rotor Materials for Advanced Ultra-supercritical Coal Power Plants (2014). https://www.osti.gov/servlets/purl/1134364.10.2172/1134364 ↗
41. T.P. Gabb, J. Gayda, J. Telesman, P.T. Kantzos: NASA Report, 20050186902, 2005.
42. S. Huang, K. An, Y. Gao, A. Suzuki (2018) Metall. Mater. Trans. A, 49(3):740–751.10.1007/s11661-017-4455-5 ↗
43. G.B. McBride (2005) Using Statistical Methods for Water Quality Management. Wiley, New York, pp. 305-313.10.1002/0471733199.app1 ↗
44. [44] J. Mao, K.M. Chang, W. Yang, D.U. Furrer, K. Ray, V.P. Vaze: Materials Science & Engineering A, 2002, 332(1-2), pp. 318-329.10.1016/S0921-5093(01)01758-0 ↗
45. [45] D.M. Collins, N. D’Souza, C. Panwisawas, C. Papadaki, G.D. West, P. Kontis: Acta Mater., 2020, 200, pp.959-70.10.1016/j.actamat.2020.09.055 ↗
46. [46] S.L. Semiatin, N.C. Levkulich, J.S. Tiley: Metall. Trans. A, 2019, 50(11), 5281-5296.10.1007/s11661-019-05422-7 ↗
47. [47] J. Tiley, R. Srinivasan, R. Banerjee, G.B. Viswanathan, B. Toby, H.L. Fraser: Mater. Sci. Technol., 2009, 25(11), 1369-1374.10.1179/174328409X399010 ↗
48. [48] S.L. Semiatin, D.W. Mahaffey, N.C. Levkulich, O.N. Senkov, J.S. Tiley: Metall. Trans. A, 2018, 49(12), pp. 6265-6276.10.1007/s11661-018-4896-5 ↗
49. Y.U. Wang, Y.M. Jin, A.G. Khachaturyan (2002) J. Appl. Phys. 92(3):1351-1360.10.1063/1.1492859 ↗
50. M. Akhlaghi, T. Steiner, S.R. Meka, E.J. Mittemeijer (2016) J. Appl. Crystallogr. 49(1):6910.1107/S1600576715022608 ↗