journal article·2021-05

Microstructure Evolution and Mechanical Properties of cp-Ti Processed by a Novel Technique of Rotational Constrained Bending

T. Krajňák, M. Janeček, P. Minárik, J. Veselý, P. Cejpek, J. Gubicza, P. T. Hung, D. Preisler, F. Nový, A. G. Raab, G. I. Raab, R. Asfandiyarov

Publisher page

Abstract

In this study, a novel severe plastic deformation technique referred to as rotational constrained bending (RCB) is introduced. A special constrained bending die, which imposes bending deformation to the billet during the first pass, was developed for repetitive processing of pre-extruded commercially pure Ti. Strain-induced microstructural changes were investigated by a special technique of automated crystal orientation mapping in TEM simultaneously with advanced X-ray line profile analysis. Plastic deformation distribution, imposed to the billets after a selected number of passes, was followed by precise microhardness mapping. Exceptional microstructure refinement was attained by the application of repetitive bending deformation. Average grain size decreased down to 400 nm, and the dislocation density increased by about 35 pct after ten passes. X-ray macrotexture measurements revealed the formation of a basal slip texture component commonly observed in HCP materials processed by equal channel angular pressing; however, exceeding four passes, a strong $$ \left\{ {11{\bar{2}}0} \right\} $$ fiber texture started to form. Mechanical testing in tension showed a significant increase in strength in the RCB-processed samples. The proof-stress and tensile strength increased by 30 and 15 pct after four passes, respectively. At a higher number of passes, the proof stress slightly decreased because of the texture softening.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. [1] Y.T. Zhu, T.C. Lowe, T.G. Langdon: Scripta Mater., 2004, vol. 51, pp. 825-830.10.1016/j.scriptamat.2004.05.006 ↗
2. [2] D.B. Witkin, E.J. Lavernia: Prog. Mater. Sci., 2006, vol. 51, pp. 1-60.10.1016/j.pmatsci.2005.04.004 ↗
3. [3] H. Gleiter: Prog. Mater. Sci., 1989, vol. 33, pp. 223-315.10.1016/0079-6425(89)90001-7 ↗
4. [4] R.Z. Valiev, R.K. Islamgaliev, I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103-189.10.1016/S0079-6425(99)00007-9 ↗
5. [5] T.G. Langdon: Acta Mat., 2013, vol. 61, pp. 7035-7059.10.1016/j.actamat.2013.08.018 ↗
6. [6] J. Čížek, M. Janeček, T. Krajňák, J. Stráská, P. Hruška, J. Gubicza, H.S. Kim: Acta Mat., 2016, vol. 105, pp. 258-272.10.1016/j.actamat.2015.12.039 ↗
7. [7] Y. Duan, L. Tang, G. Xu, Y. Deng, Z. Yin: J. Alloys Comp., 2016, vol. 664, pp. 518-529.10.1016/j.jallcom.2016.01.022 ↗
8. [8] J. Stráská, M. Janeček, J. Gubicza, T. Krajňák, E.Y. Yoon, H.S. Kim: Mater. Sci. Eng. A, 2015, vol. 625, pp. 98-106.10.1016/j.msea.2014.12.005 ↗
9. [9] A.P. Zhilyaev, T.G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp. 893-979.10.1016/j.pmatsci.2008.03.002 ↗
10. [10] V.M. Segal: Mater. Sci. Eng. A, 1995, vol. 197, pp. 157-164.10.1016/0921-5093(95)09705-8 ↗
11. [11] K. Edalati, Z. Horita: J. Mater. Sci., 2010, vol. 45, pp. 4578-4582.10.1007/s10853-010-4381-z ↗
12. [12] G.J. Raab, R.Z. Valiev, T.C. Lowe, Y.T. Zhu: Mater. Sci. Eng. A, 2004, vol. 382, pp. 30-34.10.1016/j.msea.2004.04.021 ↗
13. [13] A. Rosochowski, L. Olejnik: Mater. Sci. Forum, 2011, vol. 674, pp. 19-28.10.4028/www.scientific.net/MSF.674.19 ↗
14. [14] G.I. Raab, F.Z. Utyashev, R.N. Asfandiyarov, A.G. Raab, D.A. Aksenov, I.S. Kodirov, M. Janeček, T. Krajňák: Metals, 2020, vol. 10, pp. 879-889.10.3390/met10070879 ↗
15. M. Janeček, T. Krajňák, J. Veselý, P. Minárik, D. Preisler, J. Stráský, A.G. Raab, G.I. Raab, R.N. Asfandiyarov: IOP Conf. Ser. Mater. Sci. Eng., 2019, 672, 012006.10.1088/1757-899X/672/1/012006 ↗
16. [16] G.I. Raab, D.A. Aksenov, R.N. Asfandiyarov, A.G. Raab, I.S. Kodirov, M. Janeček: Lett. Mater., 2019, vol. 9, pp. 494-498.10.22226/2410-3535-2019-4-494-498 ↗
17. [17] G. Ribárik, J. Gubicza, T. Ungár: Mater. Sci. Eng. A, 2004, vol. 387-389, pp. 343-347.10.1016/j.msea.2004.01.089 ↗
18. [18] F. Bachmann, R. Hielscher, H. Schaeben: Solid State Phenom, 2010, vol. 160, pp. 63-68.10.4028/www.scientific.net/SSP.160.63 ↗
19. [19] H. Francillette, M. Benmaouche, N. Gauquelin: J. Mater. Process. Technol., 2008, vol. 198, pp. 86-92.10.1016/j.jmatprotec.2007.06.070 ↗
20. [20] H.K. Lin, J.C. Huang: Mater. Trans., 2002, vol. 43, pp. 2424-2432.10.2320/matertrans.43.2424 ↗
21. [21] T. Krajňák, P. Minárik, J. Gubicza, K. Máthis, R. Kužel, M. Janeček: Mater. Charact., 2017, vol. 123, pp. 282-293.10.1016/j.matchar.2016.11.044 ↗
22. [22] E.F. Rauch, M. Véron: Mater. Charact., 2014, vol. 98, pp. 1-9.10.1016/j.matchar.2014.08.010 ↗
23. A.G. Raab, D.A. Aksenov, R.N. Asfandiyarov, I.S. Kodirov, G.I. Raab: IOP Conf. Ser. Mater. Sci. Eng., 2018, vol. 447, 012088.10.1088/1757-899X/447/1/012088 ↗
24. [24] G. Purcek, G.G. Yapici, I. Karaman, H.J. Maier: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2303-2308.10.1016/j.msea.2010.11.021 ↗
25. [25] K. Hajizadeh, B. Eghbali, K. Topolski, K.J. Kurzydlowski: Materials Chemistry and Physics, 2014, vol. 143, pp. 1032-1038.10.1016/j.matchemphys.2013.11.001 ↗
26. [26] V.V. Stolyarov, Y.T. Zhu, I.V. Alexandrov, T.C. Lowe, R.Z. Valiev: Mater. Sci. Eng. A, 2003, vol. 343, pp. 43-50.10.1016/S0921-5093(02)00366-0 ↗
27. [27] Y.J. Chen, Y.J. Li, J.C. Walmsley, S. Dumoulin, S.S. Gireesh, S. Armada, P.C. Skaret, H.J. Roven: Scr. Mater., 2011, vol. 64, pp. 904-907.10.1016/j.scriptamat.2011.01.030 ↗
28. [28] C.S. Meredith, A.S. Khan: J. Mater. Process. Technol., 2015, vol. 219, pp. 257-270.10.1016/j.jmatprotec.2014.12.024 ↗
29. [29] A. Ghaderi, M.R. Barnett: Acta Mat., 2001, vol. 59, pp. 7824-7839.10.1016/j.actamat.2011.09.018 ↗
30. [30] Y.J. Chen, Y.J. Li, J.C. Walmsley, S. Dumoulin, P.C. Skaret, H.J. Roven: Mater. Sci. Eng. A, 2010, vol. 527, pp. 789-796.10.1016/j.msea.2009.09.005 ↗
31. [31] T. Krajňák, P. Minárik, J. Stráská, J. Gubicza, K. Máthis, M. Janeček: J. Alloys Comp., 2017, vol. 705, pp. 273-282.10.1016/j.jallcom.2017.02.061 ↗
32. [32] G. Németh, K. Horváth, Ch. Hervoches, P. Cejpek, J. Palán, M. Duchek, K. Máthis: Metals, 2018, vol. 8, pp. 1000-1019.10.3390/met8121000 ↗
33. [33] T. Mukai, M. Yamanoi, H. Watanabe, K. Higashi: Scr. Mater., 2001, vol. 45, pp. 89-94.10.1016/S1359-6462(01)00996-4 ↗
34. Y. Murakami: Metal Fatigue:Effects of Small Defects and Nonmetallic Inclusions, 2nd ed., Academic Press, Boca Raton 2019, pp. 293-316.10.1016/B978-0-12-813876-2.00013-3 ↗
35. [35] D. Jia, Y.M. Wang, K.T. Ramesh, E. Ma, Y.T. Zhu, and R.Z. Valiev: Appl. Phys. Lett., 2001, vol. 79, pp. 611.10.1063/1.1384000 ↗
36. [36] K.T. Park and D.H. Shin: Metall. Mater. Trans. A, 2002, vol. 33, pp. 705-07.10.1007/s11661-002-0134-1 ↗
37. [37] Y.M. Wang, E. Ma: Acta Mat., 2004, vol. 52, pp. 1699-1709.10.1016/j.actamat.2003.12.022 ↗