journal article·2020-11

The Detriment of Coherency Strains to the Electrical Conductivity of Naturally-Aged B319 Al Alloy

Eli Vandersluis, Comondore Ravindran, Menachem Bamberger

Publisher page

Abstract

Coherency strains that arise during natural aging can substantially affect the material properties of Al alloys. Yet, these time-dependent phase transformations must be precisely distinguished from the immediate results of quenching after solution treatment. In this study, automotive B319 Al castings with varying solidification rates and strontium contents were subjected to solution treatments at 500 °C for up to 48 hour. Their hardness and electrical conductivity were measured as-quenched and again after 7 days at ambient-temperature. The role of Cu segregation and growth was effectively isolated from the Cu dissolution and Si spheroidization processes that occurred during the prior high-temperature treatment. The evolution of coherent Cu zones in the Al lattice within 10 hour of natural aging was sufficient to reach stable, 20 to 30 pct improvements in alloy hardness, relative to the as-cast and as-quenched conditions. However, the increased coherency strains from natural aging were detrimental to conductivity, promoting 1 to 1.5 pct IACS reductions from the as-quenched values, independent of the casting prehistory. These insights provided a clear understanding of the mechanisms controlling mechanical properties and electron flow in B319 alloy, and they elucidated the relative magnitudes of solid solution and coherency strains. These observations are critical for improving Al alloy heat treatment procedures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. A. Mohamed and F. Samuel: in Heat Treatment—Conventional and Novel Applications, F. Czerwinski, ed., InTech Open Access, Rijeka, 2012, pp. 55–72.
2. E. Sjölander and S. Seifeddine: J. Mater. Process. Tech., 2010, vol. 210, pp. 1249-1259.10.1016/j.jmatprotec.2010.03.020 ↗
3. E. Ogris, A. Wahlen, H. Lüchinger and P. Uggowitzer: J. Light Met., 2002, vol. 2, pp. 263-269.10.1016/S1471-5317(03)00010-5 ↗
4. R. Wang and W. Lu: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2799-2809.10.1007/s11661-012-1603-9 ↗
5. V. Páramo, R. Colás, E. Velasco and S. Valtierra: J. Mater. Eng. Perform., 2000, vol. 9, pp. 616-622.10.1361/105994900770345467 ↗
6. W. Callister and D. Rethwisch: An Introduction, 10th ed., Wiley, Hoboken, NJ, 2018.
7. J. Davis, Ed.: ASM Specialty Handbook: Aluminum and aluminum alloys, ASM Int., Mater. Park, OH, 1993.
8. I. AguileraLuna, H. ManchaMolinar, M. CastroRomán, J. EscobedoBocardo and M. HerreraTrejo: Mater. Sci. Eng. A, 2013, vol. 561, pp. 1-6.10.1016/j.msea.2012.10.064 ↗
9. J. Kim, E. Kobayashi and T. Sato: Mater. Trans., 2015, vol. 56, no. 11, pp. 1771-1780.10.2320/matertrans.L-M2015824 ↗
10. E. Vandersluis, A. Lombardi, C. Ravindran, A. Bois-Brochu, F. Chiesa and R. MacKay: Mater. Sci. Eng. A, 2015, vol. 648, pp. 401-411.10.1016/j.msea.2015.09.091 ↗
11. R. Lumley, N. Deeva, R. Larsen, J. Gembarovic and J. Freeman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1074-1086.10.1007/s11661-012-1443-7 ↗
12. E. Vandersluis and C. Ravindran: J. Alloys Compd., 2020, vol. 838, 155577.10.1016/j.jallcom.2020.155577 ↗
13. R. Lumley, I. Polmear, H. Groot and J. Ferrier: Scripta Mater., 2008, vol. 58, pp. 1006-1009.10.1016/j.scriptamat.2008.01.031 ↗
14. M. Mulazimoglu, R. Drew and J. Gruzleski: J. Mater. Sci. Lett., 1989, vol. 8, pp. 297-300.10.1007/BF00725503 ↗
15. J. Chen, H. Hung, C. Wang and N. Tang: Int. J. Heat Mass Tran., 2017, vol. 105, pp. 189-195.10.1016/j.ijheatmasstransfer.2016.09.090 ↗
16. E. Vandersluis and C. Ravindran: J. Mater. Eng. Perform., 2018, vol. 27, no. 3, pp. 1109-1121.10.1007/s11665-018-3184-2 ↗
17. E. Vandersluis and C. Ravindran: J. Mater. Sci., 2019, vol. 54, no. 5, pp. 4325-4339.10.1007/s10853-018-3109-3 ↗
18. E. Vandersluis, N. Prabaharan and C. Ravindran, Int. J. Metalcast., 2020, vol. 14, pp. 37-46.10.1007/s40962-019-00329-w ↗
19. D. Mitlin, V. Radmilovic, J. Morris and U. Dahmen: Metall. Mater. Trans. A, 2003, vol. 34, no. 13, pp. 735-742.10.1007/s11661-003-1001-4 ↗
20. O. Engler, C. Marioara, Y. Aruga, M. Kozuka and O. Myhr: Mater. Sci. Eng. A, 2019, vol. 759, pp. 520-529.10.1016/j.msea.2019.05.073 ↗
21. I. Zuiko and R. Kaibyshev: J. Alloys Compd., vol. 759, pp. 108-119, 2018.10.1016/j.jallcom.2018.05.053 ↗
22. F. Samuel: J. Mater. Sci., 1998, vol. 33, pp. 2283-2297.10.1023/A:1004383203476 ↗
23. E. Vandersluis, P. Emadi, B. Andilab and C. Ravindran: Metall. Mater. Trans. A, 2020, vol. 51, no. 4, pp. 1874-1886.10.1007/s11661-020-05650-2 ↗
24. D. Hatakeyama, K. Nishimura, K. Matsuda, T. Namiki, S. Lee, N. Nunomura, T. Aida, T. Matsuzaki, R. Holmestad, S. Wenner and C. Marioara: Metall. Mater. Trans. A, 2018, vol. 49, pp. 5871-5877.10.1007/s11661-018-4832-8 ↗
25. D. Lados, D. Apelian and L. Wang: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 171-180.10.1007/s11663-010-9437-6 ↗