journal article·2020-08Open access

A Microstructurally Based Model for Recrystallization in Dual-Phase Steels

Alexandre Mathevon, Véronique Massardier, Damien Fabrègue, Philippe Rocabois, Michel Perez

Abstract

Adjusting and predicting the ferrite recrystallization kinetics of cold-rolled Advanced High-Strength Steels during annealing is necessary to control their final microstructure and thus their mechanical properties. This study proposes a microstructurally based model for predicting the recrystallization kinetics of Dual-Phase steels that takes into account the effect of several physical parameters (chemical composition, temperature, cold rolling reduction ratio, and precipitation state). First, ternary Fe-C-Mn grades were used to validate the parameters of the model relative to the Mn content and to the reduction ratio. Second, the effect of other alloying elements (Si, Cr, Mo) was analyzed using recrystallization kinetics from the literature, before testing the model on two industrial Dual-Phase grades: a DP600 steel and a micro-alloyed DP1000 steel. The effect of the micro-alloyed elements (Nb,Ti) either in solid solution or as precipitates was detailed. Lastly, the model was used to build interaction maps between recrystallization and austenite formation during continuous heating with different heating rates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. M. Ollat, V. Massardier, D. Fabregue, F. Keovilay, E. Buscarlet, M. Perez, , Metall. Mater. Trans. A 48 (2017) 4486–4499.10.1007/s11661-017-4231-6 ↗
2. B. Zhu, M. Militzer, , Model. Simul. Mater. Sc. 20 (2012) 1–17.10.1088/0965-0393/20/8/085011 ↗
3. B. Scholtes, R. Boulais-sinou, A. Settefrati, D. Pino, I. Poitrault, A. Montouchet, N. Bozzolo, M. Bernacki, , Comput. Mater. Sci. 122 (2016) 57–71.10.1016/j.commatsci.2016.04.045 ↗
4. R. Loge, M. Bernacki, H. Resk, L. Delannay, H. Digonnet, Y. Chastel, T. Coupez, , Phil. Mag. 88 (2008) 3691–3712.10.1080/14786430802502575 ↗
5. M. Bernacki, H. Resk, T. Coupez, R. E. Logé, , Model. Simul. Mater. Sci. 17 (2009) 64006.10.1088/0965-0393/17/6/064006 ↗
6. C. Zheng, D. Raabe, , Acta Mater. 61 (2013) 5504–5517.10.1016/j.actamat.2013.05.040 ↗
7. M. S. Salehi, S. Serajzadeh, , Comput. Mater. Sci. 53 (2012) 145–152.10.1016/j.commatsci.2011.09.026 ↗
8. M. Kulakov, W. J. Poole, M. Militzer, , Metall. Mater. Trans. A 44A (2013) 3564–3576.10.1007/s11661-013-1721-z ↗
9. P. Li, J. Li, Q. Meng, W. Hu, D. Xu, , J. Alloys Compd. 578 (2013) 320–327.10.1016/j.jallcom.2013.05.226 ↗
10. D. Z. Yang, E. L. Brown, D. K. Matlock, G. Krauss, , Metall. Mater. Trans. A 16 (1985) 1385–1392.10.1007/BF02658671 ↗
11. J. Huang, W. J. Poole, M. Militzer, , Metall. Mater. Trans. A 35 (2004) 3363–3375.10.1007/s11661-004-0173-x ↗
12. C. Sinclair, C. Hutchinson, Y. Bréchet, , Metall. Mater. Trans. A 38 (2007) 821–830.10.1007/s11661-007-9106-9 ↗
13. K. Andrews: J. Iron Steel Inst., 1965, pp. 721–727.
14. Gleeble: Thermomechanical simulator 3500. https://www.gleeble.com/products/gleeble-3500.html, 2019.
15. R. Soto, W. Saikaly, X. Bano, C. Issartel, G. Rigaut, A. Charai, , Acta Mater. 47 (1999) 3475–3481.10.1016/S1359-6454(99)00190-1 ↗
16. P.R. Rios, G.S. da Fonseca: Grain Boundary Pinning by Particles, in: Materials Science Forum, Trans Tech Publications Ltd, 2010, vol. 638, pp. 3907–3912.10.4028/www.scientific.net/MSF.638-642.3907 ↗
17. C. S. Smith, , Trans. Metall. 175 (1948) 15–51.
18. M. Bellavoine, M. Dumont, J. Drillet, V. Hébert, P. Maugis, , Metall. Mater. Trans. A 49 (2018) 2865–2875.10.1007/s11661-018-4642-z ↗
19. A.T. Wicaksono, A Note on the Cahn Solute Drag Model, 2015.
20. V. Irmer, M. Feller-Kniepmeier, , J. Phys. Chem. Solids. 33 (1972) 2141–2148.10.1016/S0022-3697(72)80244-0 ↗
21. N. Oono, H. Nitta, Y. Iijima, , Mater. Trans. 44 (2003) 2078–2083.10.2320/matertrans.44.2078 ↗
22. Thermo-Calc Software, MOBFE 3 Steels/Fe-Alloys Mobility Database 3, 2017.
23. H. S. Zurob, D. Panahi, C. R. Hutchinson, Y. Brechet, G. R. Purdy, , Metall. Mater. Trans. A 44A (2012) 3456–3471.
24. F. Danoix, X. Sauvage, D. Huin, L. Germain, M. Gouné, , Scr. Mater. 121 (2016) 61–65.10.1016/j.scriptamat.2016.04.038 ↗
25. M. Perez, M. Dumont, D. Acevedo-Reyes, , Acta Mater. 57 (2009) 1318.10.1016/j.actamat.2008.11.020 ↗
26. M. Perez, M. Dumont, D. Acevedo-Reyes, , Acta Mater. 56 (2008) 2119–2132.10.1016/j.actamat.2007.12.050 ↗
27. R. Wagner R. Kampmann P.W. Voorhees, , Phase Trans. Mater. 5 (2005) 309–407.10.1002/352760264X.ch5 ↗
28. A. Graux, S. Cazottes, D. De Castro, D. San Martín, C. Capdevila, J.M. Cabrera, S. Molas, S. Schreiber, D. Mirković, F. Danoix, M. Bugnet, D. Fabrègue, M. Perez, Materiala, 2019, vol. 5, p. 10023310.1016/j.mtla.2019.100233 ↗
29. Thermo-Calc Software, TCFE 8 Steels/Fe-alloys database version 8, 2017.
30. H. S. Zurob, C. R. Hutchinson, Y. Brechet, G. Purdy, , Acta Mater. 50 (2002) 3077–3094.10.1016/S1359-6454(02)00097-6 ↗
31. A. Chbihi, D. Barbier, L. Germain, A. Hazotte, M. Gouné, , J. Mater. Sci. 49 (2014) 3608–3621.10.1007/s10853-014-8029-2 ↗
32. D. Barbier, L. Germain, A. Hazotte, M. Goune, A. Chbihi, , J. Mater. Sci. 50 (2015) 374–381.10.1007/s10853-014-8596-2 ↗