Advanced Thermo-mechanical Process for Homogenous Hierarchical Microstructures in HSLA Steels
Source abstract
Abstract
Engineering microstructures in high-strength low-alloy steels via advanced thermo-mechanical processing is a promising approach to overcome challenges around low work hardenability and toughness in ultrafine-grained mild steels. Recently, multiscale-hierarchical microstructures with ultrafine grains and two populations of precipitates decorating high-angle grain boundaries and dislocation structures were achieved by some of the current authors in a modern Ti-Mo-Nb high-strength low-alloy steel. However, the high-strain rate of 10 s−1 during single-pass plane-strain compression at 600 °C led to the formation of macroscopic shear bands. Here, we propose an optimized advanced multi-hit thermo-mechanical process for achieving homogenous hierarchical microstructures in the same steel without strain localization. This is verified via microscopy and thermo-kinetic modelling, using the software MatCalc. A typical body-centred-cubic rolling texture is achieved in contrast to previous process design. Ultrafine crystallites confined by a mixture of high-angle gain and subgrain boundaries are formed, decorated by two types of precipitates. Large FeMnC-rich cementite particles are found on grain boundaries and smaller TiNbC-rich precipitates on dislocations and subgrain boundaries. It is shown that TiNbC particles transform to a core-shell structure when subjected to direct aging. Thermo-kinetic modelling underpins experimental results concerning the detailed evolution of crystallite size, precipitate morphology and composition, enabling a through-process description of the microstructural evolution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Worldsteel Association: World Steel in Figures 2019. https://www.worldsteel.org/en/dam/jcr:96d7a585-e6b2-4d63-b943-4cd9ab621a91/World%2520Steel%2520in%2520Figures%25202019.pdf. Accessed 3 August 2019.
2. Worldsteel Association: Steel Markets. https://www.worldsteel.org/steel-by-topic/steel-markets.html. Accessed 3 August 2019.
3. A.J. DeArdo, M. Hua, K. Cho, and C.I. Garcia: Mater. Sci. Technol., 2009, vol. 25, pp. 1074–82.10.1179/174328409X455233 ↗
4. S. Vervynckt, K. Verbeken, B. Lopez, and J.J. Jonas: Int. Mater. Rev., 2012, vol. 57, pp. 187–207.10.1179/1743280411Y.0000000013 ↗
5. E.O. Hall: Proc. Phys. Soc. Sect. B, 1951, vol. 64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
6. R. Song, D. Ponge, D. Raabe, J.G. Speer, and D.K. Matlock: Mater. Sci. Eng. A, 2006, vol. 441, pp. 1–17.10.1016/j.msea.2006.08.095 ↗
7. A. Ohmori, S. Torizuka, and K. Nagai: ISIJ Int., 2004, vol. 44, pp. 1063–71.10.2355/isijinternational.44.1063 ↗
8. Y. Okitsu, N. Takata, and N. Tsuji: Scr. Mater., 2009, vol. 60, pp. 76–9.10.1016/j.scriptamat.2008.09.002 ↗
9. B. Eghbali: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3402–6.10.1016/j.msea.2010.01.077 ↗
10. L. Cheng, Y. Chen, Q. Cai, W. Yu, G. Han, E. Dong, and X. Li: Mater. Sci. Eng. A, 2017, vol. 698, pp. 117–25.10.1016/j.msea.2017.04.112 ↗
11. R. Song, D. Ponge, and D. Raabe: Acta Mater., 2005, vol. 53, pp. 4881–92.10.1016/j.actamat.2005.07.009 ↗
12. M. Koyama, Z. Zhang, M. Wang, D. Ponge, D. Raabe, K. Tsuzaki, H. Noguchi, and C.C. Tasan: Science, 2017, vol. 355, pp. 1055–57.10.1126/science.aal2766 ↗
13. Y.M. Wang, T. Voisin, J.T. McKeown, J. Ye, N.P. Calta, Z. Li, Z. Zeng, Y. Zhang, W. Chen, T.T. Roehling, R.T. Ott, M.K. Santala, P.J. Depond, M.J. Matthews, A. V. Hamza, and T. Zhu: Nat. Mater., 2018, vol. 17, pp. 63–70.10.1038/nmat5021 ↗
14. R. Song, D. Ponge, and D. Raabe: Scr. Mater., 2005, vol. 52, pp. 1075–80.10.1016/j.scriptamat.2005.02.016 ↗
15. C. Ledermueller, H. Li, and S. Primig: Metall. Mater. Trans. A, 2018, vol. 49, pp. 6337–50.10.1007/s11661-018-4934-3 ↗
16. J. Svoboda, F.D. Fischer, P. Fratzl, and E. Kozeschnik: Mater. Sci. Eng. A, 2004, vol. 385, pp. 166–74.
17. E. Kozeschnik, J. Svoboda, P. Fratzl, and F.D. Fischer: Mater. Sci. Eng. A, 2004, vol. 385, pp. 157–65.
18. H. Buken, P. Sherstnev, and E. Kozeschnik: Model. Simul. Mater. Sci. Eng., 2016, vol. 24, p. 35006.10.1088/0965-0393/24/3/035006 ↗
19. H. Buken and E. Kozeschnik: Metall. Mater. Trans. A, 2017, vol. 48, pp. 2812–8.10.1007/s11661-016-3524-5 ↗
20. E. Kozeschnik: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1682–4.10.1007/s11661-000-0179-y ↗
21. E. Kozeschnik, W. Rindler, and B. Buchmayr: Int. J. Mater. Res., 2007, vol. 98, pp. 826–31.10.3139/146.101535 ↗
22. J. Kreyca and E. Kozeschnik: Int. J. Plast., 2018, vol. 103, pp. 67–80.10.1016/j.ijplas.2018.01.001 ↗
23. Y. Xu, J. Zhang, Y. Bai, and M.A. Meyers: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 811–43.10.1007/s11661-007-9431-z ↗
24. R. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul-Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
25. R.A. Petković, M.J. Luton, and J.J. Jonas: Can. Metall. Q., 1975, vol. 14, pp. 137–45.10.1179/000844375795050201 ↗
26. T. Furuhara, K. Kobayashi, and T. Maki: ISIJ Int., 2004, vol. 44, pp. 1937–44.10.2355/isijinternational.44.1937 ↗
27. R.A. Grange, C.R. Hribal, and L.F. Porter: Metall. Trans. A, 1977, vol. 8A, pp. 1775–85.10.1007/BF02646882 ↗
28. S. Malekjani, I.B. Timokhina, I. Sabirov, and P.D. Hodgson: Can. Metall. Q., 2009, vol. 48, pp. 229–35.10.1179/cmq.2009.48.3.229 ↗
29. M. Abbasi, A. Kermanpur, A. Najafizadeh, S. Saeedipour, and Y. Mazaheri: Int. J. ISSI, 2012, vol. 9, pp. 6–10.
30. F. Foroozmehr, A. Najafizadeh, and A. Shafyei: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5754–8.10.1016/j.msea.2011.04.055 ↗
31. J. Gallego, A.R. Rodrigues, and L. Montanari: Mater. Res., 2014, vol. 17, pp. 527–34.10.1590/S1516-14392013005000199 ↗
32. S. Gourdet and F. Montheillet: Acta Mater., 2003, vol. 51, pp. 2685–99.10.1016/S1359-6454(03)00078-8 ↗
33. J.M. Rosenberg and H.R. Piehler: Metall. Trans., 1971, vol. 2, pp. 257–9.10.1007/BF02662666 ↗
34. S.A. Aksenov, Y.A. Puzino, and I.P. Mazur: in Metal, 2015, p. 170–76.
35. S.H.M. Anijdan, M. Hoseini, and S. Yue: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6788–93.10.1016/j.msea.2011.05.048 ↗
36. F.T. Han, Z.C. Wang, C.N. Jing, X.M. Liu, J. Su, and S.Y. Zhang: Appl. Mech. Mater., 2013, vol. 331, pp. 443–7.10.4028/www.scientific.net/AMM.331.443 ↗
37. M.R. Toroghinejad, A.O. Humphreys, D. Liu, F. Ashrafizadeh, A. Najafizadeh, and J.J. Jonas: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1163–74.10.1007/s11661-003-0136-7 ↗
38. M.R. Barnett and J.J. Jonas: ISIJ Int., 1997, vol. 37, pp. 706–14.10.2355/isijinternational.37.706 ↗
39. A.O. Humphreys, D. Liu, M.R. Toroghinejad, and J.J. Jonas: ISIJ Int., 2002, vol. 42, pp. S52–6.10.2355/isijinternational.42.Suppl_S52 ↗
40. Z. Jia, R.D.K. Misra, R. O’Malley, and S.J. Jansto: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7077–83.10.1016/j.msea.2011.05.073 ↗
41. M. Kapoor, R. O’Malley, and G.B. Thompson: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1984–95.10.1007/s11661-016-3398-6 ↗