Effects of TiC Addition on Directionally Solidified Microstructure of Ti6Al4V
Source abstract
Abstract
In this study, the effects of TiC particles as the heterogeneous nucleus on the microstructure of directionally solidified Ti6Al4V were investigated. Ti6Al4V powder containing 0.0, 0.3, 1.0, and 2.0 vol pct TiC particles in a Ti6Al4V sheath was melted and directionally solidified with a floating zone melting method. In this process, the temperature gradient G was approximately 12 K/mm, and the solidification rate R was 15 mm/min. The mean size of prior β grains decreased with increasing TiC addition. In samples containing TiC particles, some grains had an aspect ratio lower than 1. This indicated that TiC particles acted as the heterogeneous nucleus and generated fine and equiaxed prior β grains. Although the many TiC particles melted into molten Ti6Al4V and the excessively melted carbon from TiC particles precipitated as Ti2C, residual TiC particles acted as a heterogeneous nucleus.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. D. G. McCartney: Int. Mater. Rev., 1989, vol.34, pp.247-60.10.1179/imr.1989.34.1.247 ↗
2. B.S. Murty, S.A. Kori and M. Chakraborty: Int. Mater. Rev., 2002, vol.47, pp.3-29.10.1179/095066001225001049 ↗
3. T. Motegi: J. Jpn. Inst. Light Met., 1995, vol.45, pp.339-45.10.2464/jilm.45.339 ↗
4. D. Turnbull and R. Vonnegut: Ind. Eng. Chem., 1952, vol.44, pp.1292-8.10.1021/ie50510a031 ↗
5. M. Kato, M. Wada, A. Sato and T. Mori: Acta Metall., 1989, vol.37, pp.749-56.10.1016/0001-6160(89)90001-1 ↗
6. M. Niinomi: Mater. Sci. Eng. A, 1998, vol.243, pp.231-6.10.1016/S0921-5093(97)00806-X ↗
7. B. Vandenbroucke and J.P. Kruth: Rapid Prototyping J., 2007, vol.13, pp.196-203.10.1108/13552540710776142 ↗
8. Y. Watanabe, M. Sato, T. Chiba, H. Sato, N. Sato, S. Nakano and S. Suzuki: J. Jpn. Laser Process. Soc., 2019, vol.26, pp.46-50.
9. T. E. Quested and A. L. Greer: Acta Mater., 2005, vol.53, pp.4643-53.10.1016/j.actamat.2005.06.018 ↗
10. Y. Xu, D. Casari, R. H. Mathisen and Y. Li: Acta Mater., 2018, vol.149, pp.312-25.10.1016/j.actamat.2018.02.058 ↗
11. C. Badini, G. Ubertalli, D. Puppo and P. Fino: J. Mater. Sci., 2000, vol.35, pp.3903-12.10.1023/A:1004893700762 ↗
12. F. Wang, J. Mei, H. Jiang and X. Wu: Mater. Sci. Eng. A, 2007, vol.445-6, pp.461-6.10.1016/j.msea.2006.09.093 ↗
13. A. Hussein, L. Hao, C. Yan and R. Everson: Mater. Des., 2013, vol.52, pp.638-47.10.1016/j.matdes.2013.05.070 ↗
14. B. Vandenbroucke and J. P. Kruth: Rapid Prototyping J., 2007, vol.13, pp.196-203.10.1108/13552540710776142 ↗
15. H. Holleck: J. Vac. Sci. Technol. A, 1986, vol.4, pp.2661-9.10.1116/1.573700 ↗
16. J.J.Z. Li, W.L. Johnson, W-K. Rhim: Appl. Phys. Lett., 2006, vol.89, 111913.10.1063/1.2349840 ↗
17. M. Simonelli, Y. Y. Tse and C. Tuck: Metall. Mater. Trans. A, 2014, vol.45, pp.2863-72.10.1007/s11661-014-2218-0 ↗
18. P. Wanjara, R.A.L. Drew, J. Root and S. Yue: Acta Mater., 2000, vol.48, pp.1443-50.10.1016/S1359-6454(99)00453-X ↗
19. Z.Q. Chen, Y.G. Li, D. Hu, M.H. Loretto and X. Wu: Mater. Sci. Tech., 2003, vol.19, pp.1391-8.10.1179/026708303225005999 ↗
20. S. Liu and Y.C. Shin: Mater. Des., 2017, vol.136, pp.185-95.10.1016/j.matdes.2017.09.063 ↗
21. M. Yan, M. Qian, C. Kong and M.S. Dargusch: Acta Biomater., 2014, vol.10, pp.1014-23.10.1016/j.actbio.2013.10.034 ↗
22. T.B. Massalski: Binary Alloy Phase Diagrams, American Society for Metals, 1986, vol. 1, pp. 593–96.
23. Y. Watanabe, E. Miura-Fujiwara, H. Sato, K. Takekoshi, H. Tsuge, T. Kaga, N. Bando, S. Yamagami, K. Kurachi and H. Yokoyama: Int. J. Mater. Prod. Tec., 2011, vol.42, pp.29-45.10.1504/IJMPT.2011.044912 ↗