journal article·2019-05-15

Nanoindentation Investigation of Ti/Fe Bimetallic Plate Welded by Vanadium Filler

Qiaoling Chu, Min Zhang, Jihong Li, Fuxue Yan, Cheng Yan

Publisher page

Abstract

This article presents a systematic investigation of microstructures and mechanical properties of Ti/Fe bimetallic plates butt welded using vanadium (V) filler. It is found that the Ti/V/Fe interface is featured by dendrite structures consisting of β-Ti, FeTi, Fe2Ti, and α-Ti phases, with a hardness ranging from 5.5 to 16.25 GPa. V weld metal (WM) mainly consists of V solid solution phase with some α-Ti precipitating along the grain boundaries. A series of intermetallics, e.g., σ-FeV and Fe2Ti, are formed at the V/Fe WM interface. V WM has relatively uniform hardness (2 to 5 GPa), but hardness fluctuation is observed at the V/Fe WM interface, from 2 to 16.3 GPa. Cracks tend to initiate and propagate along the regions rich in σ-FeV and Fe2Ti. The reheated zone (V/Fe WM) by subsequent welding passes may promote the formation of σ-FeV, responsible for the cracking. Based on the Fe-Ti-V ternary phase diagram, a schematic model is established to predict the phase transformation in these welds.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. M. Gloc, M. Wachowski, T. Plocinski, and K.J. Kurzydlowski: J. Alloys Compd., 2016, vol. 671, pp. 446–51.10.1016/j.jallcom.2016.02.120 ↗
2. M.X. Xie, L.J. Zhang, G.F. Zhang, J.X. Zhang, Z.Y. Bi, and P.C. Li: Mater. Des., 2015, vol. 87, pp. 181–97.10.1016/j.matdes.2015.08.021 ↗
3. P. Manikandan, K. Hokamoto, M. Fujita, K. Raghukandan, and R. Tomoshige: J. Mater. Process. Technol., 2008, vol. 195, pp. 232–40.10.1016/j.jmatprotec.2007.05.002 ↗
4. B.F. Wang and Y. Yang: Mater. Sci. Eng. A, 2007, vols. 452–453, pp. 273–77.10.1016/j.msea.2006.10.129 ↗
5. S.A.A.A. Mousavi and P.F. Sartangi: Mater. Sci. Eng. A, 2008, vol. 494, pp. 329–36.10.1016/j.msea.2008.04.032 ↗
6. J. Song, A. Kostka, M. Veehmayer, and D. Raabe: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2641–47.10.1016/j.msea.2010.11.092 ↗
7. S. Kundu, M. Ghosh, and S. Chatterjee: Mater. Sci. Eng. A, 2006, vol. 428, pp. 18–23.10.1016/j.msea.2005.10.047 ↗
8. J.S. Liao, N. Yamamoto, H. Liu, and K. Nakata: Mater. Lett., 2010, vol. 64, pp. 2317–20.10.1016/j.matlet.2010.07.049 ↗
9. I. Tomashchuk, P. Sallamand, H. Andrzejewski, and D. Grevey: Intermetallics, 2011, vol. 19, pp. 1466–73.10.1016/j.intermet.2011.05.016 ↗
10. S. Kundu and S. Chatterjee: Mater. Sci. Eng. A, 2006, vol. 425, pp. 107–13.10.1016/j.msea.2006.03.034 ↗
11. M.K. Lee, J.G. Lee, Y.H. Choi, D.W. Kim, C.K. Rhee, Y.B. Lee, and S.J. Hong: Mater. Lett., 2010, vol. 64, pp. 1105–08.10.1016/j.matlet.2010.02.024 ↗
12. Q.L. Chu, R.X. Bai, M. Zhang, J.H. Li, Z.K. Lei, N. Hu, J.M. Bell, and C. Yan: Mater. Charact., 2017, vol. 132, pp. 330–37.10.1016/j.matchar.2017.08.025 ↗
13. Q.L. Chu, M. Zhang, J.H. Li, Q.Y. Fan, W.W. Xie, and Z.Y. Bi: J. Mater. Process. Technol., 2015, vol. 225, pp. 67–76.10.1016/j.jmatprotec.2015.05.017 ↗
14. J.L. Murray: ASM Handbook, vol. 3, ASM International, Materials Park, OH, 1992.
15. H. Okamoto: J. Phase Equilib., 2006, vol. 27, pp. 542–43.10.1007/BF02736471 ↗
16. V. Raghavan: J. Phase Equilib., 2011, vol. 32, pp. 381–82.10.1007/s11669-011-9895-9 ↗
17. S. Nogami, J. Miyazaki, A. Hasegawa, T. Nagasaka, and T. Muroga: J. Nucl. Mater., 2013, vol. 442, pp. S562–S566.10.1016/j.jnucmat.2013.01.300 ↗
18. Y. Ustinovshikov, B. Pushkarev, and I. Sapegina: J. Alloys Compd., 2005, vol. 398, pp. 133–38.10.1016/j.jallcom.2005.02.030 ↗
19. R.J. Kurtz, M.L. Hamilton, and H. Li: J. Nucl. Mater., 1998, vols. 258–263, pp. 1375–79.10.1016/S0022-3115(98)00161-5 ↗
20. K. Fukumoto, T. Morimura, T. Tanaka, A. Kimura, K. Abe, H. Takahashi, and H. Matsui: J. Nucl. Mater., 1996, vol. 239, pp. 170–75.10.1016/S0022-3115(96)00467-9 ↗
21. D.H. Xie, K.Z. Liu, X.B. Xian, L.S. Ye, and Y.P. Chen: Rare Met. Mater. Eng., 2008, vol. 37 (9), pp. 1566–69.10.1016/S1875-5372(09)60042-4 ↗
22. C. Liu, J.W. Yang, Y.F. Shi, Q. Fu, and Y. Zhao: J. Mater. Process. Technol., 2018, vol. 256, pp. 239–46.10.1016/j.jmatprotec.2018.02.024 ↗
23. C.P. Guo, G.R. Li, X. Zheng, and Z.M. Du: CALPHAD, 2012, vol. 38. pp. 155–60.10.1016/j.calphad.2012.06.010 ↗
24. B. Massicot, J.M. Joubert, and M. Latroche: Int. J. Mater. Res., 2010, vol. 101, pp. 1414–23.10.3139/146.110379 ↗
25. F.M. Wei and H.M. Flower: Mater. Sci. Technol., 1989, vol. 5 (12), pp. 1172–77.10.1179/mst.1989.5.12.1172 ↗
26. V. Raghavan: J. Phase Equilib., 2013, vol. 34, pp. 230–43.10.1007/s11669-013-0230-5 ↗
27. G. Effenberg and S. Ilyenko, eds., Springer, 2009, vol. 11, pp. 678–94.
28. X.L. Wang, X.M. Wang, C.J. Shang, and R.D.K. Misra: Mater. Sci. Eng. A, 2016, vol. 649, pp. 282–92.10.1016/j.msea.2015.09.030 ↗
29. X.L. Wang, Y.R. Nan, Z.J. Xie, Y.T. Tsai, J.R. Yang, and C.J. Shang: Mater. Sci. Eng. A, 2017, vol. 702, pp. 196–205.10.1016/j.msea.2017.06.081 ↗