Development of Al-Al3Ni Nanocomposite by Duplex Processing of Flame Spray and Friction Stir Processing, and Evaluation of Its Properties
Source abstract
Abstract
In this study, Al-Al3Ni nanocomposite was fabricated by friction stir processing (FSP) of a nickel-deposited Al6061-T6 plate. X-ray diffraction results showed that Al3Ni phase was formed because of an in situ reaction between the preplaced nickel and aluminum substrate. To predict the first phase formed during FSP, effective heat of formation (EHF) thermodynamic model was applied, and the results were in agreement with experimental data. The presence of facet nanoparticles in transmission electron microscopy micrographs of the stir zone (SZ) confirmed the formation of Al3Ni nano-reinforcements. Although microhardness and ultimate tensile strength in the SZ of nanocomposite degraded because of precipitates dissolution in Al6061-T6 during FSP, it showed improved tribological behavior at elevated temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. ASM Handbook Committee, ASM Handbook, vol. 2, 10th Ed, ASM International, Ohio, 1993, pp. 15–20.
2. M. Vasheghani Farahani, E. Emadoddin, M. Emamy, A. Honarbakhsh Raouf, Mater. Des., 2014,vol 54, pp. 361-7.10.1016/j.matdes.2013.08.044 ↗
3. S. Nath, S. Pityana, J. D. Majumdar, Surf. Coat. Technol., 2012, vol. 206, pp. 3333-41.10.1016/j.surfcoat.2012.01.038 ↗
4. S. Thapliya, D. K. Dwivedi, J. Mater. Process. Technol., 2016, vol. 238, pp. 30-8.10.1016/j.jmatprotec.2016.07.009 ↗
5. S. Tomida,K. Nakata, S. Saji, T. Kubo, Surf. Coat. Technol.,2001, vol 142-144,pp. 585-9.10.1016/S0257-8972(01)01172-0 ↗
6. E. Yun, S. Lee, J. Surf. Coat. Technol., 2006, vol. 200, pp. 3478-85.10.1016/j.surfcoat.2004.11.017 ↗
7. M. Gui, S.B. Kang, Mater. Lett., 2000, vol. 46, pp. 296-302.10.1016/S0167-577X(00)00191-9 ↗
8. R.S. Mishra, Z.Y. Ma, I. Charit, Mater. Sci. Eng., A, 2003, vol. 341, pp. 307-10.10.1016/S0921-5093(02)00199-5 ↗
9. J.Q. Su, T.W. Nelson, C.J. Sterling, J. Scripta Mater., 2005, Vol 52, pp. 135-40.10.1016/j.scriptamat.2004.09.014 ↗
10. J.Q. Su, T.W. Nelson, C.J. Sterling, J. Mater. Res., 2003, vol. 18, pp. 1757-60.10.1557/JMR.2003.0243 ↗
11. Y. Morisada, H. Fujii, T. Nagaoka, M. Fukusumi, Mater. Sci. Eng., A, 2006, vol. 419, pp. 344-8.10.1016/j.msea.2006.01.016 ↗
12. F. Adel Mehraban, F. Karimzadeh, M. H. Abbasi, JOM, 2015, vol. 67, pp. 998-1006.10.1007/s11837-015-1383-y ↗
13. J. Qian, J. Li, J. Xiong, F. Zhangb, X. Lin,, Mater. Sci. Eng. A, 2012, vol. 550, pp. 279– 85.10.1016/j.msea.2012.04.070 ↗
14. S.R. Anvari, F. Karimzadeh, M.H. Enayati, J. Alloys Compd. 2013, vol. 562, pp. 48-55.10.1016/j.jallcom.2013.01.161 ↗
15. C.J. Hsu, C.Y. Chang, P.W. Kao, N.J. Ho, C.P. Chang, J. Acta Mater., 2006, vol. 54, pp. 5241-9.10.1016/j.actamat.2006.06.054 ↗
16. C. Díaz, J. L. González-Carrasco, G. Caruana, and M. Lieblich, Metall. Mater. Trans. A, 1996, vol. 27, pp. 3259-66.10.1007/BF02663876 ↗
17. L. Ke, C. Huang, L. Xing, K. Huang, J. Alloys Compd., 2010, vol. 503, 494-9.10.1016/j.jallcom.2010.05.040 ↗
18. G.R. Cui, Z.Y. Ma, S.X. Li, J Acta Mater. 2009, vol. 57, pp. 5718-29.10.1016/j.actamat.2009.07.065 ↗
19. R.S. Mishra, Z.Y. Ma, Mater. Sci. Eng., R, 2005, vol. 50, pp. 1-78.10.1016/j.mser.2005.07.001 ↗
20. R. Pretorius, R. de Reus, A.M. Vredenberg, F.W. Saris, Mater. Lett., 1990, vol. 9, pp. 494-9.10.1016/0167-577X(90)90094-3 ↗
21. S. Prakrathi, M. Ravikumar, K.R. Udupa, K. Udaya Bhat, J. ISRN Mater. Sci., 2013 vol. 2, 1-6.10.1155/2013/541762 ↗
22. P.M.G.P. Moreira, T. Santos, S.M.O. Tavares, V. Richter-Trummer, P. Vilaça, P.M.S.T. de Castro, Mater. Des., 2009, vol. 30, pp. 180-7.10.1016/j.matdes.2008.04.042 ↗
23. M.M. El-Rayes, E.A. El-Danaf, J. Mater. Process. Technol, 2012, vol. 212, pp. 1157-68.10.1016/j.jmatprotec.2011.12.017 ↗
24. L. B. Johannes, and R. S. Mishra, Mater. Sci. Eng., A, 2007, vol. 464, pp. 255-260.10.1016/j.msea.2007.01.141 ↗
25. N. Yuvaraj, and R. S. Vipin., IJARI, 2016, vol. 4, pp. 469-473.10.51976/ijari.421623 ↗
26. S.R. Anvari, F. Karimzadeh, M.H. Enayati, Wear, 2013, vol. 304, pp. 144–51.10.1016/j.wear.2013.03.014 ↗