Effect of Various Nanoparticles on Tribo-Layers and Wear Behavior of TC11 Alloy
Source abstract
Abstract
Multilayer graphene (MLG), Fe2O3, and their nanocomposites with various proportions and amounts were applied as additives and directly participated in the formation of tribo-layers during sliding wear of TC11 alloy against AISI 52100 steel. Their ingredients and amounts were found to exert substantial effects on the additive-containing tribo-layers and wear behavior. Irrespective of the added amount of MLG or Fe2O3, the formed tribo-layers, because of the lack of load-bearing or lubricant capacity, readily lost stability and protection function, causing a high wear rate. However, a small quantity of MLG/Fe2O3 nanocomposites could result in a remarkable decrease in the wear rate. This was attributed to the stable existence and continuous protection of a friction-reduced and wear-resistant double-layer tribo-layer. In particular, Fe2O3-rich nanocomposite additives produced more protective tribo-layers to markedly improve the wear resistance of TC11 alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. C. Lee, X. Wei, J.W. Kysar, and J. Hone: Science, 2008, vol. 321, pp. 385–88.10.1126/science.1157996 ↗
2. K.I. Bolotin, K.J. Sikes, Z. Jiang, M. Klima, G. Fudenberg, J. Hone, P. Kim, and H.L. Stormer: Solid State Commun., 2008, vol. 146, pp. 351–55.10.1016/j.ssc.2008.02.024 ↗
3. A.A. Balandin, S. Ghosh, W. Bao, I. Calizo, D. Teweldebrhan, F. Miao, and C.N. Lau: Nano Lett., 2008, vol. 8, pp. 902–07.10.1021/nl0731872 ↗
4. N.A. Kotov: Nature, 2006, vol. 442, pp. 254–55.10.1038/442254a ↗
5. W. Choi, I. Lahiri, R. Seelaboyina, and Y.S. Kang: Crit. Rev. Solid State, 2010, vol. 35, pp. 52–71.10.1080/10408430903505036 ↗
6. W.Z. Zhai, X.L. Shi, J. Yao, A.M.M. Ibrahim, Z.S. Xu, Q.S. Zhu, Y.C. Xiao, L. Chen, and Q.X. Zhang: Compos. Part. B, 2015, vol. 70, pp. 149–55.10.1016/j.compositesb.2014.10.052 ↗
7. W.Z. Zhai, X.L. Shi, M. Wang, Z.S. Xu, J. Yao, S.Y. Song, and Y.F. Wang: Wear, 2014, vol. 310, pp. 33–40.10.1016/j.wear.2013.12.014 ↗
8. Z.S. Xu, X.L. Shi, W.Z. Zhai, J. Yao, S.Y. Song, and Q.X. Zhang: Carbon, 2014, vol. 67, pp. 168–77.10.1016/j.carbon.2013.09.077 ↗
9. C.F. Gutierrez-Gonzalez, A. Smirnov, A. Centeno, A. Fernández, B. Alonso, V.G. Rocha, R. Torrecillas, A. Zurutuza, and J.F. Bartolome: Ceram. Int., 2015, vol. 41, pp. 7434–38.10.1016/j.ceramint.2015.02.061 ↗
10. J. Llorente, B. Román-Manso, P. Miranzo, and M. Belmonte: J. Eur. Ceram. Soc., 2016, vol. 36, pp. 429–35.10.1016/j.jeurceramsoc.2015.09.040 ↗
11. S.S. Kandanur, M.A. Rafiee, F. Yavari, M. Schrameyer, Z.Z. Yu, T.A. Blanchet, and N. Koratkar: Carbon, 2012, vol. 50, pp. 3178–83.10.1016/j.carbon.2011.10.038 ↗
12. H. Wang, G.Y. Xie, Z.G. Zhu, Z. Ying, and Y. Zeng: Compos. Part. A, 2014, vol. 67, pp. 268–73.10.1016/j.compositesa.2014.09.011 ↗
13. D. Berman, A. Erdemir, and A.V. Sumant: Carbon, 2013, vol. 59, pp. 167–75.10.1016/j.carbon.2013.03.006 ↗
14. D. Berman, A. Erdemir, and A.V. Sumant: Carbon, 2013, vol. 54, pp. 454–59.10.1016/j.carbon.2012.11.061 ↗
15. K.C. Ludema: Wear Particles: from the Cradle to the Grave, Elsevier Science Publishers B.V., Amsterdam, 1992, pp. 155–60.
16. A. Iwabuchi, H. Kubosawa, and K. Hori: Wear, 1990, vol. 139, pp. 319–33.10.1016/0043-1648(90)90054-E ↗
17. A. Iwabuchi, K. Hori, and H. Kubosawa: Wear, 1988, vol. 128, pp. 123–37.10.1016/0043-1648(88)90179-2 ↗
18. A. Iwabuchi: Wear, 1991, vol. 151, pp. 301–11.10.1016/0043-1648(91)90257-U ↗
19. H. Kato: Tribol. Int., 2008, vol. 41, pp. 735–42.10.1016/j.triboint.2008.01.001 ↗
20. H. Kato: Wear, 2003, vol. 255, pp. 426–29.10.1016/S0043-1648(03)00077-2 ↗
21. H. Kato, and K. Komai: Wear, 2007, vol. 262, pp. 36–41.10.1016/j.wear.2006.03.046 ↗
22. A. Gupta, G. Chen, P. Joshi, S. Tadigadapa, and P.C. Eklund: Nano Lett., 2006, vol. 6, pp. 2667–73.10.1021/nl061420a ↗
23. A.C. Ferrari, J.C. Meyer, V. Scardaci, C. Casiraghi, M. Lazzeri, F. Mauri, S. Piscanec, D. Jiang, K.S. Novoselov, S. Roth, and A.K. Geim: Phys. Rev. Lett., 2006, vol. 97, pp. 13831–40.
24. D.A. Rigney: Wear, 1992, vol. 152, pp. 187–92.10.1016/0043-1648(92)90214-S ↗
25. F.H. Stott: Tribol. Int., 2002, vol. 35, pp. 489–95.10.1016/S0301-679X(02)00041-5 ↗
26. N. Fillot, I. Iordanoff, and Y. Berthier: Wear, 2007, vol. 262, pp. 949–57.10.1016/j.wear.2006.10.011 ↗
27. Y.L. Qiao, H.C. Zhao, Y. Zang, and Q. Zhang: Tribol., 2004, vol. 34, pp. 523–30.
28. X. Feng, S. Kwon, J.Y. Park, and M. Salmeron: Acs Nano, 2013, vol. 7, pp. 1718–24.10.1021/nn305722d ↗
29. Q.Y. Zhang, Y. Zhou, X.X. Li, L. Wang, X.H. Cui, and S.Q. Wang: Tribol. Lett., 2016, vol. 63, pp. 1–13.10.1007/s11249-016-0692-9 ↗
30. Q.Y. Zhang, S.Q. Wang, Y. Zhou, K.M. Chen, L. Wang, and X.H. Cui: Tribol. Int., 2017, vol. 105, pp. 334–44.10.1016/j.triboint.2016.10.022 ↗
31. W. Ames, and A.T. Alpas: Metall. Mater. Trans. A, 1995, vol. 26, pp. 85–98.10.1007/BF02669796 ↗
32. Z.Y. Xu: Metal Material Thermodynamics, Science Press, Beijing, 1981.
33. M. Godet: Wear, 1984, vol. 100, pp. 437–52.10.1016/0043-1648(84)90025-5 ↗
34. C. Guiderdoni, E. Pavlenko, V. Turq, A. Weibel, P. Puech, C. Estournès, A. Peigney, W. Bacsa, and C. Laurent: Carbon, 2013, vol. 58, pp. 185–97.10.1016/j.carbon.2013.02.049 ↗
35. H. Porwal, P. Tatarko, R. Saggar, S. Grasso, M.K. Mani, I. Dlouhý, J. Dusza, and M.J. Reece: Ceram. Int., 2014, vol. 40, pp. 12067–74.10.1016/j.ceramint.2014.04.046 ↗