Synthesis and Characterization of In Situ Dendritic/Particulate α-Al(Fe,TM)Si Phase Reinforced Al Matrix Composites
Source abstract
Abstract
The strength and ductility of transition metallic element alloyed Al alloys could be inevitably and severely weakened if these elements appeared as coarse intermetallics. Present studies aimed to optimize the morphologies and sizes of these intermetallics via composition design and process selection so as to decrease their detrimental effects to the properties. It is shown that the dendritic α-Al(Fe,TM)Si phase solidified as primary phase can be refined into small dendrites or micro- and submicro-sized particles via controlling the cooling rate and alloy composition, and this phase exhibits better heat resistance. After spark plasma sintering (SPS) the atomized alloy powders, the bulk aluminum matrix composites (AMCs) were successfully prepared and well strengthened by the uniformly distributed particulate α-Al(Fe,TM)Si phase. These sintered bulk composites also possess good heat resistance that might facilitate their application for some heat-resistant parts. The transmission electron microscope (TEM) and high-resolution TEM (HRTEM) results indicate these α-Al(Fe,TM)Si phases possesses body-centered-cubic structure with a lattice constant of 1.25 to 1.27 nm. The solidification or phase formation of these alloys is discussed as well as the densification process for the SPS of powders. The present studies indicate a possibility to prepare in situ small dendritic/particulate α-Al(Fe,TM)Si phase reinforced AMCs by using the casting process and controlling the normal impurity elements in Al alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. K.U. Kainer: Metal Matrix Composites—Custom-Made Materials for Automotive and Aerospace Engineering, Wiley-VCH, Weinheim, 2003.
2. N. Chawla, J.J. Williams, and R. Saha: J. Light Met., 2002, vol. 2, pp. 215–27.10.1016/S1471-5317(03)00005-1 ↗
3. O. Beffort: Werkstoffe fur Transport und Verkehr Materials Day, ETH-Zurich, Zurich, 2001.
4. K.S. Ravi Chandran, K.B. Panda, and S.S. Sahay: JOM, 2004, vol. 5, pp. 42–48.10.1007/s11837-004-0127-1 ↗
5. Schwartz MM (1997) Composite Materials, Volume II: Processing Fabrication and Applications. Prentice Hall, Englewood Cliffs
6. L.M. Tham, M. Gupta, and L. Cheng: Acta Mater., 2001, vol. 49, pp. 3243–53.10.1016/S1359-6454(01)00221-X ↗
7. M. Kouzeli and A. Mortensen: Acta Mater., 2002, vol. 50, pp. 39–51.10.1016/S1359-6454(01)00327-5 ↗
8. A. Slipenyuk, V. Kuprin, Y. Milman, V. Goncharuk, and J. Eckert: Acta Mater., 2006, vol. 54, pp. 157–66.10.1016/j.actamat.2005.08.036 ↗
9. D.C. Halverson, A.J. Pyzik, I.A. Aksay, and W.E. Snowden: J. Am. Ceram. Soc., 1989, vol. 72, pp. 775–80.10.1111/j.1151-2916.1989.tb06216.x ↗
10. N. Chawla, J.J. Williams, and R. Saha: J. Light Met., 2002, vol. 2, pp. 215–27.10.1016/S1471-5317(03)00005-1 ↗
11. A. McKie, J. Winzer, I. Sigalas, M. Herrmann, L. Weiler, J. Rodel, and N. Can: Ceram. Int., 2011, vol. 37, pp. 1–8.10.1016/j.ceramint.2010.07.034 ↗
12. Y. Wu, G.Y. Kim, I.E. Anderson, and T.A. Lograss: Acta Mater., 2010, vol. 58, pp. 4398–4405.10.1016/j.actamat.2010.04.036 ↗
13. A.M. Redsten, E.M. Klier, A.M. Brown, and D.C. Dunand: Mater. Sci. Eng. A, 1995, vol. 201, pp. 88–102.10.1016/0921-5093(94)09741-0 ↗
14. D.J. Lloyd: Int. Mater. Rev., 1994, vol. 39, pp. 1–23.10.1179/imr.1994.39.1.1 ↗
15. N. Soltani, A. Bahrami, and M.I. Pech-Canul: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4366–73.10.1007/s11661-013-1747-2 ↗
16. S.C. Tjong and Z.Y. Ma: Mater. Sci. Eng. R, 2000, vol. 29, pp. 49–113.10.1016/S0927-796X(00)00024-3 ↗
17. R.Y. Wang and W.H. Lu: JOM, 2012, vol. 64, pp. 330–36.10.1007/s11837-012-0251-2 ↗
18. A. Radjai, K. Miwa, and T. Nishio: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1477–84.10.1007/s11661-998-0363-z ↗
19. C.S. Cui, A. Schulz, E. Matthaei-Schulz, and H.W. Zoch: J. Mater. Sci., 2009, vol. 44, pp. 4814–26.10.1007/s10853-009-3734-y ↗
20. F. Schurack, J. Eckert, and L. Schultz: Acta Mater., 2001, vol. 49, pp. 1351–61.10.1016/S1359-6454(01)00045-3 ↗
21. J.M. Park, J.H. Han, K.B. Kim, N. Mattern, J. Eckert, and D.-H. Kim: Phil. Mag. Lett., 2009, vol. 89, pp. 623–32.10.1080/09500830903236020 ↗
22. D.C. Hofmann, J.Y. Suh, A. Wiest, G. Duan, M.-L. Lind, M.D. Demetriou, and W.L. Johnson: Nature, 2008, vol. 45, pp. 1085–89.10.1038/nature06598 ↗
23. X. Hui, W. Dong, G.L. Chen, and K.F. Yao: Acta Mater., 2007, vol. 55, pp. 907–20.10.1016/j.actamat.2006.09.012 ↗
24. G.S. Choi, Y.H. Kim, H.K. Cho, A. Inoue, and T. Masumoto: Scripta Metall. Mater., 1995, vol. 33, pp. 1301–06.10.1016/0956-716X(95)00358-3 ↗
25. A. Inoue, H.M. Kimura, K. Sasamori, and T. Masumoto: Mater. Sci. Eng. A, 1996, vols. 217–218, pp. 401–06.10.1016/S0921-5093(96)10282-3 ↗
26. D.J. Skinner and K. Okazaki: Scripta Metall., 1984, vol. 18, pp. 905–09.10.1016/0036-9748(84)90258-8 ↗
27. S. Hariprasad, S.M.L. Sastry, and K.L. Jerina: Acta Mater., 1996, vol. 44, pp. 383–89.10.1016/1359-6454(95)00160-1 ↗
28. P.Y. Li, H.J. Yu, S.C. Chai, and Y.R. Li: Scripta Mater., 2003, vol. 49, pp. 819–24.10.1016/S1359-6462(03)00483-4 ↗
29. S. Hariprasad, S.M.L. Sastry, K.L. Jerina, and R.J. Lederich: Metall. Trans. A, 1993, vol. 24A, pp. 865–73.10.1007/BF02656507 ↗
30. D. Skinner, C. Adam, and K. Okazaki: in Modern Developments in Powder Metallurgy, vol. 16, Ferrous and Non-Ferrous Materials, E.N. Aqua and C.I. Whitmen, eds., Metal Powder Industries Federation, Princeton, 1985, p. 427.
31. H.M. Kimura, K. Sasamori, and A. Inoue: J. Mater. Res., 2000, vol. 15, pp. 2737–44.10.1557/JMR.2000.0392 ↗
32. M. Galano, F. Audebert, I.C. Stone, and B. Cantor: Acta Mater., 2009, vol. 57, pp. 5107–19.10.1016/j.actamat.2009.07.011 ↗
33. K.E. Knipling, D.C. Dunand, and D.N. Seidman: Z. Metallkd., 2006, vol. 97, pp. 246–65.10.3139/146.101249 ↗
34. L.G. Hou, C. Cui, and J.S. Zhang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6400–12.10.1016/j.msea.2010.06.066 ↗
35. J.W. Qiao, S. Wang, Y. Zhang, P.K. Liaw, and G.L. Chen: Appl. Phys. Lett., 2009, vol. 94, p. 151905.10.1063/1.3118587 ↗
36. C.-L. Chen, A. Richter, and R.C. Thomson: Intermetallics, 2010, vol. 18, pp. 499–508.10.1016/j.intermet.2009.09.013 ↗
37. L.G. Hou, H. Cui, Y.H. Cai, and J.S. Zhang: Mater. Sci. Eng. A, 2009, vol. 527, pp. 85–92.10.1016/j.msea.2009.07.041 ↗
38. L.G. Hou, H. Yu, H. Cui, Y.H. Cai, L.Z. Zhuang, and J.S. Zhang: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1814–26.10.1007/s11661-012-1511-z ↗
39. L.F. Mondolfo: Aluminium Alloys: Structure and Properties. Butterworths, London, 1976.
40. G.G. Long, K.W. Chapman, P.J. Chupas, L. Bendersky, L.E. Levine, F. Mompiou, J.K. Stalick, and J.W. Cahn: Phys. Rev. Lett., 2013, vol. 111, p. 015502.10.1103/PhysRevLett.111.015502 ↗
41. P.N. Crepeau: AFS Trans., 1995, vol. 103, pp. 361–66.
42. M. Mahta, M. Emamy, X. Cao, and J. Campbell: in Materials Science Research Trends, L.V. Olivane, ed., Nova Science Publisher, Inc., New York, 2008, p. 251.
43. L. Lodgaard and N. Ryum: Mater. Sci. Eng. A, 2000, vol. 283, pp. 144–152.10.1016/S0921-5093(00)00734-6 ↗
44. G. Gustafsson, T. Thorvaldsson, and G.L. Dunlop: Metall. Trans. A, 1986, vol. 17A, pp. 45–52.10.1007/BF02644441 ↗
45. F. Humphreys: Acta Metall., 1977, vol. 25, pp. 1323–44.10.1016/0001-6160(77)90109-2 ↗
46. V. Hansen, B. Andersson, J.E. Tibballs, and J. Gjønnes: Metall. Mater. Trans. B, 1995, vol. 26B, pp. 839–49.10.1007/BF02651731 ↗
47. Y.J. Li and L. Arnberg: Acta Mater., 2003, vol. 51, pp. 3415–28.10.1016/S1359-6454(03)00160-5 ↗
48. Y.J. Li, A.M.F. Muggerud, A. Olsen, and T. Furu: Acta Mater., 2012, vol. 60, pp. 1004–14.10.1016/j.actamat.2011.11.003 ↗
49. A.M.F. Muggerud, E.A. Mørtsella, Y.J. Li, and R. Holmestad: Mater. Sci. Eng. A, 2013, vol. 567, pp. 21–28.10.1016/j.msea.2013.01.004 ↗
50. A.M.F. Muggerud, Y.J. Li, R. Holmestad, and S.J. Andersen: Acta Cryst. B, 2014, vol. 70, pp. 888–96.10.1107/S2052520614017880 ↗
51. L. Lodgaard and N. Ryum: Mater. Sci. Technol., 2000, vol. 16, pp. 599–604.10.1179/026708300101508315 ↗
52. A.M.F. Muggerud, Y.J. Li, and R. Holmestad: Phil. Mag., 2014, vol. 94, pp. 556–68.10.1080/14786435.2013.857796 ↗
53. C. Flament, J. Ribis, J. Garnier, T. Vandenberghe, J. Henry, and A. Deschamps: Phil. Mag., 2015, vol. 95, pp. 906–17.10.1080/14786435.2015.1009959 ↗
54. W.C. Yang, S.X. Ji, X.R. Zhou, I. Stone, G. Scamans, G.E. Thompson, and Z.Y. Fan: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3971–80.10.1007/s11661-014-2346-6 ↗
55. M. Cooper and K. Robinson: Acta Cryst., 1966, vol. 20, pp. 614–17.10.1107/S0365110X6600149X ↗
56. M. Cooper: Acta Cryst., 1967, vol. 23, pp. 1106–07.10.1107/S0365110X67004372 ↗
57. A.S. Sharma, K. Biswas, B. Basu, and D. Chakravarty: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2072–84.10.1007/s11661-010-0589-4 ↗
58. X. Wang, S.R. Casolco, G. Xu, and J.E. Garay: Acta Mater., 2007, vol. 55, pp. 3611–22.10.1016/j.actamat.2007.02.022 ↗
59. G.Q. Xie, D.V. Louzguine-Luzgin, H. Kimura, and A. Inoue: Appl. Phys. Lett., 2007, vol. 90, p. 241902.10.1063/1.2748102 ↗
60. G. Maizza, S. Grasso, Y. Sakka, T. Noda, and O. Ohashi: Sci. Technol. Adv. Mater., 2007, vol. 8, pp. 644–54.10.1016/j.stam.2007.09.002 ↗
61. R. Chaim: Mater. Sci. Eng. A, 2007, vol. 443, pp. 25–32.10.1016/j.msea.2006.07.092 ↗
62. P. Krug: EngineExpo 2009, Stuttgart, Germany, 2009.
63. M. Galano, F. Audebert, A. García Escorial, I.C. Stone, and B. Cantor: Acta Mater., 2009, vol. 57, pp. 5120–30.10.1016/j.actamat.2009.07.009 ↗
64. F. Audebert, M. Galano, C.T. Rios, H. Kasama, M. Peres, C. Kiminami, W.J. Botta, and C. Bolfarini: J. Alloys Compd., 2013, vol. 577, pp. 650–57.10.1016/j.jallcom.2013.06.162 ↗
65. M. Kouzeli and D.C. Dunand: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 287–92.10.1007/s11661-004-0129-1 ↗
66. K. Dám and D. Vojtěch: Mater. Sci. Eng. A, 2014, vol. 590, pp. 232–38.10.1016/j.msea.2013.10.028 ↗
67. W.J. Boettinger, L.A. Bendersky, R.J. Schaefer, and F.S. Binacaniello: Metall. Trans. A, 1988, vol. 19A, pp. 1101–07.10.1007/BF02628394 ↗
68. M.K. Premkumar, A. Lawley, and M.J. Koczak: Metall. Trans. A, 1992, vol. 23A, pp. 3219–30.10.1007/BF02663431 ↗
69. D.L. Yaney and W.D. Nix: Metall. Trans. A, 1987, vol. 18A, pp. 893–902.10.1007/BF02646930 ↗
70. F. Prusa, D. Vojtěch, A. Michalcová, and I. Marek: Mater. Sci. Eng. A, 2014, vol. 603, pp. 141–49.10.1016/j.msea.2014.02.081 ↗
71. K. Dám, D. Vojtěch, and F. Prusa: Mater. Sci. Eng. A, 2013, vol. 560, pp. 705–10.10.1016/j.msea.2012.10.017 ↗
72. D.V. Dudina, K. Georgarakis, M. Aljerf, Y. Li, M. Braccini, A.R. Yavari, and A. Inoue: Composites A, 2010, vol. 41, pp. 1551–57.10.1016/j.compositesa.2010.07.004 ↗
73. R. Bauri and M.K. Surappa: J. Mater. Process. Technol., 2009, vol. 209, pp. 2077–84.10.1016/j.jmatprotec.2008.04.058 ↗
74. Z.H. Tan, B.J. Pang, D.T. Qin, J.Y. Shi, and B.Z. Gai: Mater. Sci. Eng. A, 2008, vol. 489, pp. 302–09.10.1016/j.msea.2007.12.021 ↗
75. L. Battezzati, C. Antonione, and F. Marino: Scripta Metall., 1988, vol. 22, pp. 623–26.10.1016/S0036-9748(88)80171-6 ↗
76. D.M.J. Wilkes and H. Jones: J. Mater. Sci., 1999, vol. 34, p. 74961.
77. B. Markoli, T. Boncina, and F. Zupanic: Mat.-wiss. Werkstofftech., 2012, vol. 43, pp. 340–44.10.1002/mawe.201200951 ↗
78. N. Rozman, J. Medved, and F. Zupanic: Phil. Mag., 2011, vol. 91, pp. 4230–46.10.1080/14786435.2011.608733 ↗