journal article·2016-07

Effect of Grain Boundary Character Distribution on the Impact Toughness of 410NiMo Weld Metal

M. Divya, C. R. Das, Sandip Ghosh Chowdhury, S. K. Albert, A. K. Bhaduri

Publisher page

Abstract

Grain boundary character distributions in 410NiMo weld metal were studied in the as-welded, first-stage, and second-stage postweld heat treatment (PWHT) conditions, and these were correlated with the Charpy-V impact toughness values of the material. The high impact toughness values in the weld metal in the as-welded and first-stage PWHT conditions compared to that in the second-stage condition are attributed to the higher fraction of low-energy Σ boundaries. A higher volume fraction of retained austenite and coarser martensite after second-stage PWHT accompanied by the formation of the ideal cube component in the 2-hour heat-treated specimen led to a reduction in the toughness value. A subsequent increase in the PWHT duration at 873 K (600 °C) enhanced the formation of {111}〈112〉, which impedes the adverse effect of the cubic component, resulting in an increase in the impact toughness. In addition to this, grain refinement during 4-hour PWHT in the second stage also increased the toughness of the weld metal.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. ASTM standard A487/A487M, EST 2010.
2. M. Divya, C.R. Das, V. Ramasubbu, S.K. Albert, and A.K. Bhaduri: J. Mater. Process. Technol., 2011, vol. 211, pp. 2032–38.10.1016/j.jmatprotec.2011.06.024 ↗
3. T.G. Gooch: Weld. J., 1995, vol. 74 (8), pp. 213s–223s.
4. Stephen D. Antolovich and Birindar Singh: Metall. Trans., 1971, vol. 2, p. 2135.10.1007/BF02917542 ↗
5. M. Divya, C.R. Das, S. Mahadevan, S.K. Albert, P. Pandian, SK Kar, A.K. Bhaduri, T. Jayakumar: Metall. Mater. Trans. A, 2015, 46A: 2554–67.10.1007/s11661-015-2847-y ↗
6. M. Tamura, Y. Haruguchi, M. Yamashita, Y. Nagaoka, K. Ohinata, K. Ohnishi, H. Ito, K. Shinozuka, and H. Esaka: ISIJ Int., 2006, vol. 46, pp. 1693–1702.10.2355/isijinternational.46.1693 ↗
7. Liangyun Lan, Chunlin Qui, Dewen Zhao, Xiuhua Gao, and Linxiu Du: Mater. Sci. Eng. A, 2011, vol. 529, pp. 192–200.10.1016/j.msea.2011.09.017 ↗
8. Valerie Randle: J. Mater. Sci., 2009, vol. 44, pp. 4211–18.10.1007/s10853-009-3570-0 ↗
9. V. Randle: Adv. Imaging Electron. Phys., 2008, vol. 151, p. 363.10.1016/S1076-5670(07)00405-3 ↗
10. A.F. Gourgues, H.M. Flower, and T.C. Lindley: Mater. Sci. Technol., 2000, pp. 26–39.
11. G.A. Chadwick and D.A. Smith, Grain Boundary Structure and Properties. Academic Press, New York (1976).
12. D. Wolf and S. Yip (eds), Materials Interfaces. Chapman and Hall, London (1992).
13. G. Kurdjumov and G. Sachs: Z. Phys., 1930, vol. 64, pp. 325–43.10.1007/BF01397346 ↗
14. L.C. Lim and T. Watanabe: Acta Metall. Mater., 1990, vol. 38, pp. 2507–16.10.1016/0956-7151(90)90262-F ↗
15. T. Watanabe and S. Tsurekawa: Acta Mater., 1999, vol. 47 (15–16), pp. 4171–85.10.1016/S1359-6454(99)00275-X ↗
16. S. Hanada, S. Watanabe, and O. Izumi: J. Mater. Sci., 1986, vol. 21, p. 203.10.1007/BF01144721 ↗
17. S. Morito, H. Yoshida, T. Maki, and X. Huang: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 237–40.10.1016/j.msea.2005.12.048 ↗
18. http://www.msm.cam.ac.uk/map/crystal/tar/xrdcalc.tar.
19. Mario Birkholz: Thin Film Analysis by X-Ray Scattering, 1st ed., Wiley-VCH Verlag, Weinheim, Germany, 2006, p. 220.
20. Tadao Watanabe and S. Tsurekawa: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 447–455.10.1016/S0921-5093(04)00653-7 ↗
21. Stephen D. Antolovich and Birindar Singh: Metall. Trans., 1970, vol. 1, pp. 3463–65.10.1007/BF03037885 ↗
22. P.D. Bilmes, M. Solari, and C.L. Llorente: Mater. Characterization, 2001, vol. 46, pp. 285–96.10.1016/S1044-5803(00)00099-1 ↗
23. K.P. Balan, A. Venugopal Reddy, and D.S. Sarma: Scripta Mater., 1998, vol. 39 (7), pp. 901–05.10.1016/S1359-6462(98)00267-X ↗
24. S. Zappa, H.G. Svoboda, E.S. Surian (2013) Weld. J., 92: 297–303.
25. R. Song, D. Ponge, D. Raabe: Acta Mater., 2005, vol. 53, pp. 4881–92.10.1016/j.actamat.2005.07.009 ↗
26. H.J. Kim and J.W. Morris, Jr.: Weld. J., 1983, vol. 62, p. 210.
27. H.J. Kim, Y.H. Kim, and J.W. Morris: ISIJ Int., 1998, vol. 38 (11), pp. 1277–85.10.2355/isijinternational.38.1277 ↗
28. E. Folkard: Welding Metallurgy of Stainless Steels, Springer-Verlag Wein, New York, 1988.10.1007/978-3-7091-8965-8 ↗
29. N.P. Floyd: “Energetics and Deformation Response of Random Grain Boundaries in FCC Nickel” Thesis submitted to the faculty of the Virginia Polytechnic Institute and State University in partial fulfillment of the requirements for the degree of Master of Science, 2010.
30. F.J. Humphreys: Mater. Sci. Technol., 1992, vol. 8, pp. 135–43.10.1179/mst.1992.8.2.135 ↗
31. J.B. Brosse, R. Fillit, and M. Biscondi: Scripta Metall., 1981, vol. 15, pp. 619–23.10.1016/0036-9748(81)90038-7 ↗
32. Jian-Qing Sua, M. Demura, and T. Hirano: Phil. Mag., 2002, vol. 82 (8), pp. 1541–57.
33. N. Nakada, T. Tsuchiyama, S. Takaki, and N. Miyano: ISIJ Int., 2011, vol. 51 (2), pp. 299–304.10.2355/isijinternational.51.299 ↗
34. L. Liu, Z.-G. Yang, C. Zhang, and W.-B. Liu: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7204–09.10.1016/j.msea.2010.07.083 ↗