Effects of Sn Addition on the Microstructures and Mechanical Properties of Mg-6Zn-3Cu-xSn Magnesium Alloys
Source abstract
Abstract
In this paper, Mg-6Zn-3Cu-xSn (ZC63-xSn) magnesium alloys with different Sn contents (0, 1, 2, 4 wt pct) were fabricated and subjected to different heat treatments. The microstructures and mechanical properties of the obtained ZC63-xSn samples were investigated by optical microscopy, X-ray diffraction, scanning electron microscopy, Vickers hardness testing, and tensile testing. It was found that the As-cast Mg-6Zn-3Cu (ZC63) magnesium alloy mainly contained α-Mg grains and Mg(Zn,Cu) particles. Sn dissolved in α-Mg grains when Sn content was below 2 wt pct while Mg2Sn phase forms in the case of Sn content was above 4 wt pct. Addition of Sn refined both α-Mg grains and Mg(Zn,Cu) particles, and increased the volume fraction of Mg(Zn,Cu) particles. Compared with the Sn-free alloy, the microhardness of Sn-containing alloys increased greatly and that of As-extrude ZC63-4Sn sample achieved the highest value. The strength of ZC63 magnesium alloy was significantly enhanced because of Sn addition, which was attributed to grain refinement strengthening, solid solution strengthening, and precipitation strengthening. Furthermore, the ultimate yield stress, yield strength, and elongation of ZC63-xSn magnesium alloys were increased owing to the deceasing grain size induced by extrusion process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. L Gaines, R Cuenca, F Stodolsky, and S Wu: Potential Automotive Uses of Wrought Magnesium Alloys, Argonne National Laboratory, Argonne, 1996.10.2172/425305 ↗
2. PE Krajewski, S Kim, JT Carter and R Verma, Trends in Metals & Materials Engineering 2007, vol. 20, pp. 60-68.
3. T. Homma, C. L. Mendis, K. Hono and S. Kamado, Materials Science and Engineering: A 2010, vol. 527, pp. 2356-2362.10.1016/j.msea.2009.12.024 ↗
4. C. Mendis, K. Ohishi, Y. Kawamura, T. Honma, S. Kamado and K. Hono, Acta Materialia 2009, vol. 57, pp. 749-760.10.1016/j.actamat.2008.10.033 ↗
5. Elsayed Ayman, Umeda Junko and Kondoh Katsuyoshi, Acta Materialia 2011, vol. 59, pp. 273-282.10.1016/j.actamat.2010.09.031 ↗
6. LY Wei, GL Dunlop and H Westengen, Metallurgical and Materials Transactions A 1995, vol. 26, pp. 1705-1716.10.1007/BF02670757 ↗
7. C. Bettles, Scripta Materialia 2004, vol. 51, pp. 193-197.10.1016/j.scriptamat.2004.04.020 ↗
8. C. L. Mendis, K. Oh-ishi and K. Hono, Scripta Materialia 2007, vol. 57, pp. 485-488.10.1016/j.scriptamat.2007.05.031 ↗
9. J Buha, Materials Science and Engineering: A 2008, vol. 489, pp. 127-137.10.1016/j.msea.2007.12.006 ↗
10. J Buha and T Ohkubo, Metallurgical and Materials Transactions A 2008, vol. 39, pp. 2259-2273.10.1007/s11661-008-9545-y ↗
11. JH Jun, JM Kim, BK Park, KT Kim and WJ Jung, Journal of materials science 2005, vol. 40, pp. 2659-2661.10.1007/s10853-005-2099-0 ↗
12. S Golmakaniyoon and R Mahmudi, Materials Science and Engineering: A 2011, vol. 528, pp. 1668-1677.10.1016/j.msea.2010.10.095 ↗
13. A Luo and MO Pekguleryuz, Journal of Materials Science 1994, vol. 29, pp. 5259-5271.10.1007/BF01171534 ↗
14. CL Mendis, CJ Bettles, MA Gibson and CR Hutchinson, Materials Science and Engineering: A 2006, vol. 435, pp. 163-171.10.1016/j.msea.2006.07.090 ↗
15. Hongmei Liu, Yungui Chen, Yongbai Tang, Shanghai Wei and Gao Niu, Journal of Alloys and Compounds 2007, vol. 440, pp. 122-126.10.1016/j.jallcom.2006.09.024 ↗
16. Shanghai Wei, Tianping Zhu, Michael Hodgson and Wei Gao, Materials Science and Engineering: A 2013, vol. 585, pp. 139-148.10.1016/j.msea.2013.07.051 ↗
17. Fugang Qi, Dingfei Zhang, Xiaohua Zhang and Xingxing Xu, Journal of Alloys and Compounds 2014, vol. 585, pp. 656-666.10.1016/j.jallcom.2013.09.156 ↗
18. Jun Shen, Linzhi Wang, Dong Peng and Dan Wang, Metallurgical and Materials Transactions A 2012, vol. 43, pp. 4397-4405.10.1007/s11661-012-1204-7 ↗
19. IJ Polmear, Materials science and technology 1994, vol. 10, pp. 1-16.10.1179/mst.1994.10.1.1 ↗
20. Jihua Chen, Zhenhua Chen, Hongge Yan, Fuquan Zhang and Kun Liao, Journal of Alloys and Compounds 2008, vol. 461, pp. 209-215.10.1016/j.jallcom.2007.07.066 ↗
21. R.W. Hertzberg, R.P. Vinci, and J.L. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials. Wiley, New York, 1996.
22. L. Gao, R. S. Chen and E. H. Han, Journal of Alloys and Compounds 2009, vol. 481, pp. 379-384.10.1016/j.jallcom.2009.02.131 ↗
23. L. Gao, R. S. Chen and E. H. Han, Journal of Alloys and Compounds 2009, vol. 472, pp. 234-240.10.1016/j.jallcom.2008.04.049 ↗
24. J. Shen, K. Liu, Y. Li, S. Z. Li and L. B. Wen, Science and Technology of Welding and Joining 2013, vol. 18, pp. 404-413.10.1179/1362171813Y.0000000112 ↗
25. CH Caceres, CJ Davidson, JR Griffiths and CL Newton, Materials Science and Engineering: A 2002, vol. 325, pp. 344-355.10.1016/S0921-5093(01)01467-8 ↗
26. Lei Gao, R.S. Chen and E.H.Han, Journal of materials science 2009, vol. 44, pp. 4443-4454.10.1007/s10853-009-3672-8 ↗
27. JW Luster, M Thumann and R Baumann, Materials science and technology 1993, vol. 9, pp. 853-862.10.1179/mst.1993.9.10.853 ↗
28. K.U. Kainer and B.L. Mordike: Magnesium Alloys and Their Applications. Wiley, Weinheim, 2000).10.1002/3527607552 ↗
29. Jan Bohlen, Patrik Dobroň, Jacek Swiostek, Dietmar Letzig, František Chmelík, Pavel Lukáč and Karl Ulrich Kainer, Materials Science and Engineering: A 2007, vol. 462, pp. 302-306.10.1016/j.msea.2006.02.470 ↗
30. S. M. He, X. Q. Zeng, L. M. Peng, X. Gao, J. F. Nie and W. J. Ding, Journal of Alloys and Compounds 2006, vol. 421, pp. 309-313.10.1016/j.jallcom.2005.11.046 ↗
31. M. Mabuchi and K. Higashi, Acta Mater. 1996, vol. 44, pp. 4611–18.10.1016/1359-6454(96)00072-9 ↗
32. M. R. Barnett, Scripta Materialia 2008, vol. 59, pp. 696-698.10.1016/j.scriptamat.2008.05.027 ↗