Microstructural Evolution and Mechanical Properties of Nanointermetallic Phase Dispersed Al65Cu20Ti15 Amorphous Matrix Composite Synthesized by Mechanical Alloying and Hot Isostatic Pressing
Source abstract
Abstract
The structure and mechanical properties of nanocrystalline intermetallic phase dispersed amorphous matrix composite prepared by hot isostatic pressing (HIP) of mechanically alloyed Al65Cu20Ti15 amorphous powder in the temperature range 573 K to 873 K (300 °C to 600 °C) with 1.2 GPa pressure were studied. Phase identification by X-ray diffraction (XRD) and microstructural investigation by transmission electron microscopy confirmed that sintering in this temperature range led to partial crystallization of the amorphous powder. The microstructures of the consolidated composites were found to have nanocrystalline intermetallic precipitates of Al5CuTi2, Al3Ti, AlCu, Al2Cu, and Al4Cu9 dispersed in amorphous matrix. An optimum combination of density (3.73 Mg/m3), hardness (8.96 GPa), compressive strength (1650 MPa), shear strength (850 MPa), and Young’s modulus (182 GPa) were obtained in the composite hot isostatically pressed (“hipped”) at 773 K (500 °C). Furthermore, these results were compared with those from earlier studies based on conventional sintering (CCS), high pressure sintering (HPS), and pulse plasma sintering (PPS). HIP appears to be the most preferred process for achieving an optimum combination of density and mechanical properties in amorphous-nanocrystalline intermetallic composites at temperatures ≤773 K (500 °C), while HPS is most suited for bulk amorphous alloys. Both density and volume fraction of intermetallic dispersoids were found to influence the mechanical properties of the composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. T. Masumoto: Mater. Sci. Eng. A, 1994, vols. 179–180, pp. 8–16.10.1016/0921-5093(94)90155-4 ↗
2. P. Nandi, P.P. Chattopadhyay, S.K. Pabi, and I. Manna: Mater. Sci. Eng. A, 2003, vol. 359, pp. 11–17.10.1016/S0921-5093(03)00338-1 ↗
3. F. Schurack, J. Eckert, and L. Schultz: Acta Mater., 2001, vol. 49, pp. 1351–61.10.1016/S1359-6454(01)00045-3 ↗
4. I. Manna, P.P. Chattopadhyay, F. Banhart, and H.J. Fecht: Mater. Sci. Eng. A, 2004, vol. 379, pp. 360–65.10.1016/j.msea.2004.03.010 ↗
5. P. Nandi, P.P. Chattopadhyay, P.M. G. Nambissan, F. Banhart, H.J. Fecht, and I. Manna: J. Non-Cryst. Solids, 2005, vol. 351, pp. 2485–92.10.1016/j.jnoncrysol.2005.06.043 ↗
6. I. Manna, P. Nandi, B. Bandyopadhyay, K. Ghoshray, and A. Ghoshray: Acta Mater., 2004, vol. 52, pp. 4133–42.10.1016/j.actamat.2004.05.026 ↗
7. P. Nandi, P.M. G. Nambissan, and I. Manna: J. Alloys Compd., 2004, vol. 377, pp. 179–87.10.1016/j.jallcom.2003.12.041 ↗
8. C.S. Kiminami, N.D. Basim, M.J. Kaufman, M.F. Amateau, T.J. Eden, and G.J. Galbraith: Key Eng. Mater., 2001, vol. 189, pp. 503–08.10.4028/www.scientific.net/KEM.189-191.503 ↗
9. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
10. H.J. Fecht: NanoStruct. Mater., 1992, vol. 1, pp. 125–30.10.1016/0965-9773(92)90064-5 ↗
11. A. Inoue, K Nakazato, Y. Kawamura, and T. Masumoto: Mater. Sci. Eng. A, 1994, vols. 179–180. pp. 654–58.10.1016/0921-5093(94)90287-9 ↗
12. J.R Weertman, D. Farkas, K. Hemker, H. Kung, M. Mayo, and R. Mitra: MRS Bull., 1999, vol. 24, pp. 44-50.10.1557/S088376940005154X ↗
13. M. Legros, B.R Elliott, M.N Rittner, J.R Weertman, and K.J Hemker: Philos. Mag. A, 2000, vol. 80, pp. 1017–26.10.1080/01418610008212096 ↗
14. K.S. Kumar, H. Van Swygenhoven, and S. Suresh: Acta Mater., 2003, vol. 51, pp. 5743–74.10.1016/j.actamat.2003.08.032 ↗
15. J. Gubicza, G. Dirras, P. Szommer, and B. Bacroix: Mater. Sci. Eng. A, 2007, vol. 458, pp. 385–90.10.1016/j.msea.2006.12.127 ↗
16. H.V. Atkinson and S. Davies: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2981–3000.10.1007/s11661-000-0078-2 ↗
17. H.V. Atkinson and B.A Rickinson: Hot Isostatic Processing, Adam Hilger, London, 1991.
18. H.V. Atkinson, A. Zulfia, A. Lima Filho, H. Jones, and S. King: Mater. Design, 1997, vol. 18, pp. 243–45.10.1016/S0261-3069(97)00058-7 ↗
19. S.C. Tjong and K. F. Tam: Mater. Chem. Phys., 2006, vol. 97, pp. 91–97.10.1016/j.matchemphys.2005.07.075 ↗
20. G.L. Hankin, M.B. Toloczko, M.L. Hamilton, F.A. Garner, and R.G. Faulkner: J. Nucl. Mater., 1998, vols. 258–263, pp. 1657–63.10.1016/S0022-3115(98)00204-9 ↗
21. M.B. Toloczko, M.L. Hamilton, and G.E. Lucas: J. Nucl. Mater., 2000, vols. 283–287, pp. 987–91.10.1016/S0022-3115(00)00198-7 ↗
22. G.L. Hankin, M.B. Toloczko, M.L. Hamilton, and R.G. Faulkner: J. Nucl. Mater., 1998, vols. 258–263, pp. 1651–56.10.1016/S0022-3115(98)00203-7 ↗
23. C.A. Leo’n and R.A.L. Drew: Mater. Lett., 2002, vol. 56, pp. 812–16.10.1016/S0167-577X(02)00619-5 ↗
24. R.K. Guduru, K.A. Darling, R. Kishore, R.O. Scattergood, C.C. Koch, and K.L. Murthy: J. Mater. Sci. Eng., 2007, vol. 42, pp. 5581–88.
25. D. Roy, S. Kumari, R. Mitra, and I. Manna: Intermetallics, 2007, vol. 15, pp. 1595–05.10.1016/j.intermet.2007.06.012 ↗
26. K. Nihara, R. Morena, and D.P.H Hasselman: in Brittle Matrix Composites 2, R.C. Bradt, D.P.H. Hasselman, and F.F. Lange eds., Elsevier Applied Science, New York, NY, 1983. pp. 84–97.10.1007/978-1-4613-3488-0_7 ↗
27. Z. Witczak: Mater. Sci. Eng. A, 1997, vol. 239, pp. 206–12.10.1016/S0921-5093(97)00583-2 ↗
28. R.K. Guduru, K.A. Darling, R. Kishore, R.O. Scattergood, C.C. Koch, and K.L. Murthy: Mater. Sci. Eng. A, 2005, vol. 395, pp. 307–14.10.1016/j.msea.2004.12.048 ↗
29. R.K. Guduru, A.V. Nagasekhar, R.O. Scattergood, C.C. Koch, and K.L. Murthy: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1477–83.10.1007/s11661-006-0092-0 ↗
30. D. Roy, D. Chakravarty, R. Mitra, and I. Manna: J. Alloys Compd., 2008, vol. 460, pp. 320–25.10.1016/j.jallcom.2007.06.053 ↗
31. JCPDS file no. 45-0168.
32. JCPDS file no. 24-003.
33. JCPDS file no. 26-0038.
34. JCPDS file no. 25-0012.
35. D. Roy, R. Mitra, T. Chudoba, Z. Witczk, W. Lojkowski, H.-J. Fecht, and I. Manna: Mater. Sci. Eng. A, 2008, vol. 497, pp. 93–100.10.1016/j.msea.2008.07.059 ↗
36. D. Roy, S.S. Singh, R. Mitra, M. Rosinski, A. Michalski, W. Lojkowski, and I. Manna: Philos. Mag. A, 2009, vol. 89, pp. 1051–61.10.1080/14786430902859784 ↗
37. O.N. Senkov, S.V. Senkova, J.M. Scott, and D.B. Miracle: Mater. Sci. Eng. A, 2005, vol. 393, pp. 12–21.10.1016/j.msea.2004.09.061 ↗
38. A.V. Sergueeva, N.A. Mara, J.D. Kuntz, D.J. Branagan, and A.K. Mukherjee: Mater. Sci. Eng. A, 2004, vol. 383, pp. 219–23.10.1016/j.msea.2004.05.064 ↗
39. H. Kimura and T. Masumoto: in Amorphous Metallic Alloys, F.E. Luborsky, ed., Butterworth and Co. Publishers Ltd., London, 1983, p. 201.
40. R.K. Guduru, K.A. Darling R.O. Scattergood, C.C. Koch, K.L. Murty, M. Bakkal, and A.J. Shih: Intermetallic, 2006, vol. 14, pp. 1411–16.10.1016/j.intermet.2006.01.052 ↗
41. C.T. Liu, L. Heatherly, D.S. Easton, C.A. Carmichael, J.H. Schneibel, and C.H. Chen: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1811–20.10.1007/s11661-998-0004-6 ↗