journal article·2013-08Open access

Analysis of Acoustic Emission During the Melting of Embedded Indium Particles in an Aluminum Matrix: A Study of Plastic Strain Accommodation During Phase Transformation

Michael M. Kuba, David C. Van Aken

Abstract

Acoustic emission is used here to study melting and solidification of embedded indium particles in the size range of 0.2 to 3 um in diameter and to show that dislocation generation occurs in the aluminum matrix to accommodate a 2.5% volume change. The volume averaged acoustic energy produced by indium particle melting is similar to that reported for bainite formation upon continuous cooling. A mechanism of prismatic loop generation is proposed to accommodate the volume change and an upper limit to the geometrically necessary increase in dislocation density is calculated as 4.1 x 10^9 cm^-2 for the Al-17In alloy. Thermomechanical processing is also used to change the size and distribution of the indium particles within the aluminum matrix. Dislocation generation with accompanied acoustic emission occurs when the melting indium particles are associated with grain boundaries or upon solidification where the solid-liquid interfaces act as free surfaces to facilitate dislocation generation. Acoustic emission is not observed for indium particles that require super heating and exhibit elevated melting temperatures. The acoustic emission work corroborates previously proposed relaxation mechanisms from prior internal friction studies and that the superheat observed for melting of these micron-sized particles is a result of matrix constraint.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: nanoparticles nucleation surface interactions · Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. M.M. Kuba and D.C. Van Aken: Mater. Lett., 2012, vol. 77, pp. 89–92.10.1016/j.matlet.2012.03.008 ↗
2. G.R. Speich and R.M. Fisher: “Acoustic Emission During Martensite Formation,” Acoustic Emission (ASTM STP 505), American Society for Testing and Materials, Philadelphia, 1972, pp. 140–51.10.1520/STP35386S ↗
3. S.M.C. Van Bohemen, M.J.M Hermans, and G. Den Ouden: Mater. Sci. Technol., 2002, vol. 18, pp. 1524–28.10.1179/026708302225007709 ↗
4. P.C. Clapp: J. Phys. IV, 1995, vol. 5, pp. 11–19.
5. B.I. Voronenko: Met. Sci. Heat Treat., 1982, vol. 24 (8), pp. 545–53.10.1007/BF00769364 ↗
6. A.L. Purvis, E. Kannatey-Asibu, Jr., and R.D. Pehlke: Trans. Am. Foundry Soc., 1996, vol. 103, pp. 1–8.
7. H.M. Tensi: Second Acoust. Emiss. Symp. Proc., 1974, pp. 46–57.
8. V.B. Vorontsov and V.V. Katalnikov: J. Phys.: Conf. Ser., 2008, vol. 98 (052005), pp. 1–6.
9. A. Galeski, L. Koenczoel, E. Piorkowska, and E. Baer: Nature, 1987, vol. 352, pp. 40–41.10.1038/325040a0 ↗
10. J.R. Frederick and D.K. Felbeck: “Dislocation Motion As a Source of Acoustic Emission,” Acoustic Emission (ASTM STP 505), American Society for Testing and Materials, Philadelphia, 1972, pp. 129–39.10.1520/STP35385S ↗
11. P.M. Mummery, B. Derby, and C.B. Scruby: Acta Metall. Mater., 1993, vol. 41 (5), pp. 1431–45.10.1016/0956-7151(93)90252-N ↗
12. A.K. Malhotra and D.C. Van Aken: Philos. Mag. A, 1995, vol. 71 (5), pp. 949–64.10.1080/01418619508236230 ↗
13. A. Wolfenden and W.H. Robinson: Acta Metall., 1977, vol. 25, pp. 823–26.10.1016/0001-6160(77)90099-2 ↗
14. J.L. Murray: J. Phase Equilib., 1983, vol. 4 (3), pp. 271–78.
15. M.H. Loretto, L.M. Clarebrough, and P. Humble: Philos. Mag., 1996, vol. 13 (125), pp. 953–61.10.1080/14786436608213146 ↗
16. G.M. Vyletel, P.E. Krajewski, D.C. Van Aken, J.W. Jones, and J.E. Allison: Scripta Metall. Mater., 1992, vol. 27 (5), pp. 549–54.10.1016/0956-716X(92)90338-F ↗
17. S.M.C. Van Bohemen, J. Sietsma, M.J.M. Hermans, and I.M. Richardson: Acta Mater., 2003, vol. 51 (14), pp. 4183–96.10.1016/S1359-6454(03)00236-2 ↗
18. W.M. Haynes and D.R. Lide (ed.): CRC Handbook of Chemistry and Physics [Internet Version]. CRC, 2011.
19. D.C. Van Aken and H.L. Fraser: Int. J. Rapid Solidif., 1988, vol. 3, pp. 199–222.
20. Y. Oshima, T. Nangou, H. Hirayama, and K. Takayanagi: Surf. Sci., 2001, vol. 476 (1–2), pp. 107–14.10.1016/S0039-6028(00)01122-5 ↗
21. J. Tao, D.C. Van Aken, and J.C. Bilello: MRS Proc., 1993, vol. 307, pp. 299–304.10.1557/PROC-307-299 ↗
22. A.K. Malhotra and D.C. Van Aken: “An Internal Friction Study of Melting in Aluminum-Indium and Aluminium-Lead Alloys,” M3D: Mechanics and Mechanisms of Material Damping (ASTM STP 1169), American Society for Testing and Materials, Philadelphia, 1992, pp. 262–81.
23. A.K. Malhotra and D.C. Van Aken: Metall. Trans. A, 1993, vol. 24A, pp. 1611–19.10.1007/BF02646600 ↗
24. A.K. Malhotra and D.C. Van Aken: Acta Metall. Mater., 1993, vol. 41 (5), pp. 1337–46.10.1016/0956-7151(93)90243-L ↗
25. P.S. Dobson, P.J. Goodhew, and R.E. Smallman: Philos. Mag., 1967, vol. 16 (139), pp. 9–22.10.1080/14786436708229253 ↗
26. R. Vandervoort and J. Washburn: Philos. Mag., 1960, vol. 5 (49), pp. 24–29.10.1080/14786436008241197 ↗
27. F. Kroupa, J. Silcox, and M.J. Whelan: Philos. Mag., 1961, vol. 6 (68), pp. 971–78.10.1080/14786436108243356 ↗
28. J.W. Edington and R.E. Smallman: Philos. Mag., 1965, vol. 11 (114), pp. 1109–23.10.1080/14786436508224922 ↗
29. I. Gurrappa: J. Mater. Process. Technol., 2005, vol. I66, pp. 256–67.10.1016/j.jmatprotec.2004.09.074 ↗
30. L. Bourgeois, G. Bougaran, J.F. Nie, and B.C. Muddle: Philos. Mag. Lett., 2010, vol. 90 (11), pp. 819–29.10.1080/09500839.2010.508443 ↗
31. F.R. de Boer, R. Boom, W.C.M. Mattens, A.R. Miedema, and A.K. Niessen: Cohesion in Metals, Elsevier Science Publishers B.V., North-Holland, 1988, p. 676.
32. T.Y. Tan, P. Plekhanov, and U.M. Gösele: Appl. Phys. Lett., 1997, vol. 70, p. 1715.10.1063/1.118652 ↗
33. B. von Guérard, H. Peisl, and R. Zitzmann: Appl. Phys. A, 1974, vol. 3 (1), pp. 37–43.
34. L.E. Murr: Mater. Sci. Eng., 1981, vol. 51 (1), pp. 71–79.10.1016/0025-5416(81)90108-7 ↗
35. R.Z. Valiev, V.Y. Gertsman, and O.A. Kaibyshev: Phys. Status Solidi A, 1986, vol. 97 (1), pp. 11–56.10.1002/pssa.2210970102 ↗
36. M.D. Sangid, T. Ezaz, H. Sehitoglu, and I.M. Robertson: Acta Mater., 2011, vol. 59, pp. 283–96.10.1016/j.actamat.2010.09.032 ↗
37. A.F. Bower: Applied Mechanics of Solids. CRC Press, Boca Raton, 2010, pp. 294–99.
38. D.C. Ahn, P. Sofronis, and R. Minich: J. Mech. Phys. Solids, 2006, vol. 54, pp. 735–55.10.1016/j.jmps.2005.10.011 ↗
39. H.K.D.H. Bhadeshia: Bainite in Steels, IOM Communications, London, 2001, p. 29.
40. S.M.C. Van Bohemen, M.J.M. Hermans, G. den Ouden, and I.M. Richardson: J. Phys. D: Appl. Phys., 2002, vol. 35, pp. 1889–94.10.1088/0022-3727/35/15/313 ↗