journal article·2013-10

Microstructural Factors Controlling Blunt- and Sharp-Notch Toughness in La-Added 8Ni-13Co Secondary Hardening Steel

Ki-Sub Cho, Sung-Soo Park, Young-Bu Kim, Hee-Kwon Moon, Hoon Kwon

Publisher page

Abstract

Toughness variations of sharp and blunt notches were studied. For the quantitative analysis of various particles, small-angle neutron scattering was conducted. Under the 1323 K (1050 °C), and the 1473 K/1323 K and 1473 K/1173 K (1200 °C/1050 °C and 1200 °C/900 °C) (high-temperature initial step and low-temperature final step) austenitizing conditions, the impact toughness underwent changes as follows: 30→30→43 J. In contrast, the fracture toughness underwent variations as follows: 90.5→120→114 MPa $$ \sqrt {\text{m}} $$ . Blunt- and sharp-notch toughness parameters were found to be mainly dependent on grain size and primary particles, respectively. The microstructural dependence of toughness with notch acuity is discussed in detail.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. G.B. Olson, M. Azrin, and E.S. Wright, eds.: in Innovations in Ultrahigh Strength Steel Technology: MA, Proc. 34th Sagamore Army Mater Res Conf., Watertown, 1990.
2. J.G. Cowie, M. Azrin and G.B. Olson: Metall. Trans. A, 1989, vol. 20A, pp. 143–53.10.1007/BF02647501 ↗
3. K.J. Handerhan and W. M. Garrison, Jr.: Metall. Trans. A, 1988, vol. 19A, pp. 2989–3003.10.1007/BF02647726 ↗
4. J.W. Bray, J.L. Maloney, K.S. Raghavan and W.M. Garrison, Jr.: Metall. Trans. A. 1991, vol. 22A, pp. 2277–85.10.1007/BF02664993 ↗
5. K.J. Handerhan and W. M. Garrison, Jr.: Acta. Metall. Mater., 1992, vol. 40A, pp. 1337–55.10.1016/0956-7151(92)90435-H ↗
6. W. M. Garrison, Jr. and J. L. Maloney: Mater. Sci. Eng. A, 2005, vol. 403, pp. 299–310.10.1016/j.msea.2005.05.021 ↗
7. J.L. Maloney and W.M. Garrison Jr. (2005) Acta Mater 53:533–551.10.1016/j.actamat.2004.09.041 ↗
8. H.R. Yang, K.B. Lee and H. Kwon: Mater. Sci. Eng. A, 1999, vol. 265, pp. 179–87.10.1016/S0921-5093(98)01130-7 ↗
9. R.O. Ritchie, B. Francis and W.L. Server: Metall. Trans. A, 1976, vol. 7A, pp. 831–38.10.1007/BF02644080 ↗
10. R.O. Ritchie and R.M. Horn: Metall. Trans. A, 1978, vol. 9A, pp. 331–41.10.1007/BF02646382 ↗
11. M.F. Carlson, B.V. Narasimha Rao and G. Thomas: Metall. Trans. A, 1979, vol. 10A, pp. 1273–84.10.1007/BF02811983 ↗
12. W. Cao and X. Lu: Metall. Trans. A, 1987, vol. 18A, pp. 1569–85.10.1007/BF02646141 ↗
13. R. Ghosh, S.U. Egelhaaf, and A.R. Rennie: ILL Report ILL06GH05T, 2006.
14. J. Kohlbrecher: SASfit Version 2011-09-27 PSI, 2011.
15. K.S. Cho, H.S. Sim, J.H. Kim, J.H. Choi, K.B. Lee, H.R. Yang and H. Kwon: Mater. Charact., 2008, vol. 59, pp. 786–93.10.1016/j.matchar.2007.06.013 ↗
16. B.S. Seong, E.J. Shin, S.H. Choi: Appl. Phys. A, 2010, vol. 99, pp. 613–20.10.1007/s00339-010-5630-3 ↗
17. M. Ohnuma, J. Suzuki, S. Ohtsuka, S.W. Kim, T. Kaito, M. Inoue, H. Kitazawa, Acta Mater., 2009, vol. 57, pp. 5571–81.10.1016/j.actamat.2009.07.054 ↗
18. M.T. Hutchings and C.G. Widsor: Methods of experimental physics, 21C. Academic Press, United States (1987).
19. A.J. Allen, D. Gavillet and J.R. Weertman: Acta Metall. Mater., 1993, vol. 41, pp. 1869–84.10.1016/0956-7151(93)90207-9 ↗
20. A. Wojcieszynski: Ph.D. Dissertation, Carnegie Mellon University, 1993.