journal article·2004-06

Intermetallic diffusion coatings for enhanced hot-salt oxidation resistance of nitrogen-containing austenitic stainless steels

U. Kamachi Mudali, N. Bhuvaneswaran, P. Shankar, H. S. Khatak, B. Raj

Publisher page

Abstract

This article presents the preparation, characterization, and hot-salt oxidation behavior of nitrogen-containing type 316L stainless steel (SS), surface modified with intermetallic coatings. Three different types of intermetallic coating systems, containing aluminum, titanium, and titanium/aluminum multilayers, were formed by diffusion annealing of type 316L austenitic SS containing 0.015, 0.1, 0.2, and 0.56 pct nitrogen. Analysis by using X-ray diffraction (XRD), scanning electron microscopy (SEM), and secondary ion mass spectroscopy (SIMS) confirmed the formation of various intermetallic phases such as AIN, Al13Fe4, FeAl2, FeTi, Ti2N, and Ti3Al in the coatings. Hot salt oxidation behavior of the uncoated and surface-modified stainless steels was assessed by periodic monitoring of the weight changes of NaCl salt-applied alloys kept in an air furnace at 1023 K up to 250 hours. The oxide scales formed were examined by XRD and stereomicroscopy. Among the various surface modifications investigated in the present study, the results indicate that the titanium-modified alloys show the best hot-salt oxidation resistance with the formation of an adherent, protective, thin, and continuous oxide layer. Among the four N-containing alloys investigated, the titanium and Ti/Al multilayer modified 0.56 pct N alloy showed the best hot-salt oxidation resistance as compared to uncoated alloys. The slower corrosion kinetics and adherent scale morphology indicate that the surface-modified titanium intermetallic coatings could provide high-temperature service applications up to 1073 K, particularly in chloride containing atmospheres, for austenitic stainless steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. I.G. Wright: ASM Handbook, 1987, pp. 97–103.
2. H.J. Grabke and D.B. Meadowcroft: Guidelines for Methods of Testing and Research in High Temperature Corrosion, No. 14, European Federation of Corrosion Publications, Frankfurt, Germany, 1995.
3. P.G.H. McIIhne: “Review of High Temperature Corrosion Mechanisms Including Problems and Solutions in Waster Incineration Systems,” IRL Report. No. 18903.03, IRL, 1994.
4. J.R. Nicholls and D.J. Stephenson: in Intermetallic Compounds: Vol.2. Practice, J.H. Westbrook and R.L. Fleschier, eds., John Wiley & Sons Ltd., New York, NY, 1995, pp. 485–500.
5. H.L. Du, P.K. Datta, J.S. Burnell-Gray, A.S. James, and A. Matthews: Surf. Coating Technol., 1996, vol. 81, pp. 151–58.10.1016/0257-8972(95)02536-7 ↗
6. J.J. Eckenrod and C.W. Kovach: Properties of Austenitic Stainless Steels and Their Weld Metals (Influence of Slight Chemistry Variations), ASTM STP 679, ASTM, Philadelphia, PA, p. 17.
7. U. Kamachi Mudali: Ph.D. Thesis, University of Madras, Madras, India, 1993.
8. U. Kamachi Mudali, R.K. Dayal, J.B. Gnanamoorthy, and P. Rodriguez: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2881–87.10.1007/BF02663836 ↗
9. H.L. Dua, P.K. Dutta, J.S. Burtnell-Gray, and D.B. Lewis: J. Mater. Sci., 1995, vol. 30, pp. 2640–47.10.1007/BF00362147 ↗
10. S. Taniguchi, T. Shibata, and S. Sakon: Mater. Sci. Eng., 1995, vol. A198, pp. 85–90.10.1016/0921-5093(95)80062-Y ↗
11. H. Mabuchi: Scripta Mater., 1999, vol. 41, pp. 511–16.10.1016/S1359-6462(99)00182-7 ↗
12. G.E. Goward: Mater. Sci. Technol., 1986, vol. 2, pp. 194–200.10.1179/mst.1986.2.3.194 ↗
13. R. Meverel, C. Duret, and R. Pichoir: Mater. Sci. Technol., 1986, vol. 2, pp. 201–06.10.1179/mst.1986.2.3.201 ↗
14. H.A. Lipsitt, D. Shechtman, and R.E. Schafrik: Metall. Mater. Trans. A, 1980, vol. 11A, pp. 1369–75.10.1007/BF02653491 ↗
15. S.W. Banovic, J.N. DuPont, and A.R. Marder: Mater. High Temp., vol. 16 (4), pp. 195–9910.1179/mht.1999.019 ↗
16. H.J. Grabke: Intermetallics, 1999, vol. 7, pp. 1153–58.10.1016/S0966-9795(99)00037-0 ↗
17. A. Rahmel, W.J. Quadakkers, and M. Schutze: Mater. Corr., 1995, vol. 46, pp. 271–85.10.1002/maco.19950460503 ↗
18. J.S. Wu, L.T. Zhang, F. Wang, K. Jiang, and G.H. Qiu: Intermetallics, 2000, vol. 8, pp. 19–28.10.1016/S0966-9795(99)00062-X ↗
19. U.K. Patent No. 2,290,309.
20. A. Magnee, E. Offergeld, M. Leory, and A. Leofrt: Proc. 15th Int. Thermal Spray Conf., ASM INTERNATIONAL, Metals Park, OH, 1998, pp. 1091–1096.
21. N. Bhuvaneswaran: Ph.D. Thesis, University of Madras, Madras, India, 2003.
22. M. Pope, P. Grieveson, and K.H. Jack: Scand. J. Metall, 1973, vol. 2, pp. 29–34.
23. D.H. Kirkwood, O.E. Atasoy, and S.R. Kewon: Metall. Sci., 1974, vol. 8, pp. 49–51.10.1016/0036-9748(74)90438-4 ↗
24. D.H. Jack: Acta Metall., 1976, vol. 24, pp. 137–43.10.1016/0001-6160(76)90016-X ↗
25. H.H. Podgurski and F.N. Davis: Acta Metall., 1981, vol. 29, pp. 1–6.10.1016/0001-6160(81)90081-X ↗
26. D.S. Rickerby, S. Hendersonm, A. Hendry, and K.H. Jack: Acta Metall., 1986, vol. 34, pp. 1687–92.10.1016/0001-6160(86)90116-1 ↗
27. P.M. Heckker, H.C.F. Rozendaal, and E.J. Mittemeijer: J. Mater. Sci., 1985, vol. 20, pp. 719–21.
28. J.N. Locquet, R. Soto, L. Barrallier, and A. Charai: Microsc. Microanal. Microstruct., 1997, vol. 8, pp. 335–39.10.1051/mmm:1997126 ↗
29. M.H. Biglari, C.M. Brakman, M.A.J. Somers, W.J. Sloof, and E.J. Mittemeijer: Z. Metallkd., 1993, vol. 84, pp. 124–29.
30. F.G. Wilson and T. Gladman: Int. Mater. Rev., 1988, vol. 33, pp. 221–35.10.1179/imr.1988.33.1.221 ↗
31. M.H. Biglari, C.M. Brakman, E.J. Mittemeijer, and S. Van Der Zwaag: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 765–43.10.1007/BF02649075 ↗
32. M.H. Biglari, C.M. Brakman, E.J. Mittemeijer, and S. Van Der Zwaag: Phil. Mag., 1995, A72, pp. 931–37.10.1080/01418619508239945 ↗
33. X. Zhou, H.K. Dong, and H.D. Li: J. Appl. Phys., 1998, vol. 63 (10), pp. 4942–945.10.1063/1.340437 ↗
34. F. Zhou, R. Luck, K. Lu, and M. Ruhle: Z. Metallkd., 2001, vol. 92, pp. 675–81.
35. N. Bhuvaneswaran, U. Kamachi Mudali, and P. Shankar: Scripta Metall., 49 (2003), pp. 1133–38.10.1016/S1359-6462(03)00430-5 ↗
36. B. Pieraggi: Oxid. Met., 1987, vol. 27, pp. 177–85.10.1007/BF00667057 ↗
37. J.L. Smialek, J. Doychak, and D.J. Gaydosh: in Oxidation of High-Temperature Intermetallics, T. Grobstein, and J. Doychak, eds., TMS, Warrendale, PA, 1988, pp. 83–95.
38. J. Doychak: in Intermetallic Compounds, vol. 1: Principles, J. H. Westbrook and R.L. Fleschier, eds., John Wiley & Sons, New York, NY, 1994, pp. 977–1016.
39. J.L. Smialek, J. Doychak, and D.J. Gaydosh: Oxid. Met., 1990, vol. 34, pp. 259–65.10.1007/BF00665018 ↗
40. I. Rommerskirchen, B. Eltester, and H.J. Grabke: Mater. Corr., 1996, vol. 47, pp. 646–49.10.1002/maco.19960471109 ↗
41. B.A. Pint, P.F. Tortorelli, and I.G. Wright: in Oxidation of Intermetallics, H.J. Grabke and M. Schultze, eds., Wiley-VCH, Weinheim, 1997, pp. 183–202.10.1002/9783527612413.ch12 ↗
42. G.C. Rybicki, J.L. Smilaeak, and L.S. James: Oxid. Met., 1989, vol. 31, pp. 275–304.10.1007/BF00846690 ↗
43. P.S. Liu, K.M. Liang, and S.R. Gu: Corr. Sci., 2001, vol. 43, pp. 1217–26.10.1016/S0010-938X(00)00137-2 ↗
44. P. Kofstad: J. Less-Common Met., 1994, vol. 13, pp. 635–41.10.1016/0022-5088(67)90111-7 ↗
45. B. Zhio, J. Wu, J. Sun, B. Tu, and F. Wang: Intermetallics, 2001, vol. 9, pp. 697–703.10.1016/S0966-9795(01)00054-1 ↗
46. W. Wambach, J. Peters, and H.J. Grabke: Mater. Sci. Eng., 1987, vol. 88, pp. 205–12.10.1016/0025-5416(87)90086-3 ↗
47. J.M. Rakowski, F.S. Pettit, G.H. Meier, F. Dettenwanger, E. Schumann, and M. Ruhle: Scripta Metall. Mater., 1995, vol. 33, pp. 997–1003.10.1016/0956-716X(95)00312-J ↗
48. R.J. Hanrahan, Jr. and DP. Butt: Oxid. Met., 1997, vol. 48, pp. 41–46.10.1007/BF01675261 ↗
49. S. Seal, S.K. Roy, and S.C. Kutty: JOM-e, 2000, vol. 52 (1), pp. 1–5.10.1007/s11837-000-0190-1 ↗
50. C. Lille and R.F.A. Jargelius-Pettersson: Mater. High Temp., 2000, vol. 17 (2), pp. 287–92.10.3184/096034000783640857 ↗
51. G.C. Wood: Corr. Sci., 1962, vol. 2, pp. 255–68.10.1016/0010-938X(62)90030-6 ↗
52. G.C. Wood and M.G. Hobby: J. Iron Steel Inst., 1964, vol. 202, pp. 32–37.
53. G.C. Wood and F.H. Stott: Mater. Sci. Technol., 1987, vol. 3, pp. 519–30.10.1080/02670836.1987.11782263 ↗
54. A.L. Marasco and D.J. Young: Oxid. Met., 1991, vol. 36 (1/2), pp. 157–74.10.1007/BF00938460 ↗
55. E.G. Ivanaov: Protection Met., 1983, vol. 19, pp. 1–6.
56. D.P. Moon and M.J. Bennett: Mater. Sci. Forum, 1989, vol. 43, pp. 269–75.10.4028/www.scientific.net/MSF.43.269 ↗
57. W.C. Johnson: Metall. Trans., 1970, vol. 8, pp. 1413–19.10.1007/BF02642854 ↗
58. M. Landkof, A.V. Levy, D.H. Boone, R. Gray, and E. Yaniv: Corrosion, 1985, vol. 41, pp. 344–57.10.5006/1.3582016 ↗
59. Y. Saito and T. Maruyama: Proc. MRS Int. Meeting Advanced Materials, M. Dayama, S. Samiya, and R.P.H. Chang, eds., MRS, Pittsburgh, PA, 1989, pp. 435–45.
60. S. Mrowee, J. Jedlinksi, and A. Gil: Mater. Sci. Eng., 1989, vol. A120, pp. 169–73.10.1016/0921-5093(89)90735-1 ↗